[asterisk-ss7] AutoPC patch for chan_ss7 0.9.

[Mr.Surender Reddy]

Thank you it works fine for me great job infact thank you again
regards
surender


On 05/12/06, Mr.Surender Reddy <gvsurenderreddy at gmail.com> wrote:
>
> Dear ,
>                thank you for the new patch which is very useful i will
> give that a try today.
>
> regards
> surender
>
>
>  On 04/12/06, Anton <anton.vazir at gmail.com> wrote:
> >
> > Hi Jacub!
> >
> > Thanks for the patch! It's usefull!
> >
> > I've a littile question, will the patch work with different
> > opc's? on different linksets? I mean If I'm connected with
> > 2x telcos and for both of them I should have different opc?
> > If no, seems you understand chan_ss7 internals quite good,
> > maybe you will not find it very difficult to add such a
> > functionality?
> >
> > Regards,
> > Anton.
> >
> > On 5 December 2006 00:32, Jakub Klausa wrote:
> > > Hello,
> > >
> > >       here's another patch we, at ss7.pl wrote for chan_ss7
> > > 0.9.
> > >
> > >       AutoPC, or Auto Point Code patch, gives you the ability
> > > to ommit the opc/dpc configuration entirely, and refain
> > > the point code addresses from the link (if it's
> > > configured right at the other end - as an exercise, try
> > > to link asterisks with AutoPC on on both ends of a link
> > > ;)).
> > >
> > >       All you need to do, is to add:
> > >
> > >       [19:57:04] [70] manhattan:jacke:~> tail ss7.conf
> > >
> > >       [host-manhattan]
> > >       enabled => yes
> > >       autopc => yes
> > >       ;opc => 0x1111
> > >       ;dpc => test:0x2222
> > >       links => l1:1,l2:2
> > >
> > >       The 'autopc => yes' directive allows you not to specify
> > > any opc and dcp parameters. If you include them, they're
> > > ignored anyway.
> > >
> > >       After starting asterisk, you'll get something like this:
> > >
> > >       [chan_ss7.so] => (SS7 Protocol Support)
> > >       [...]
> > >       Dec  4 19:16:13 NOTICE[26879]: config.c:860 load_config:
> > > Configuring DPC 0 for linkset 'test'. [...]
> > >               -- SS7 channel loaded successfully.
> > >       Dec  4 19:16:23 WARNING[26902]: mtp.c:822
> > > timeout_sltm_t1: No SLTA received within Q.707 timer T1,
> > > trying again on link 'l1'. Dec  4 19:16:23 NOTICE[26901]:
> > > mtp.c:1195 mtp2_good_frame: autopc = 1 Dec  4 19:16:23
> > > WARNING[26902]: chan_ss7.c:651 monitor_main: MTP is now
> > > UP on link 'l1'. Dec  4 19:16:23 WARNING[26902]:
> > > chan_ss7.c:661 monitor_main: MTP is now INSERVICE for
> > > linkset 'test'. *CLI> ss7 show links
> > >       Number of linksets: 1.
> > >       Linkset 1 name is: test.
> > >               Number of links in linkset: 2.
> > >               Link number 1 name is: l1
> > >               Link number 2 name is: l2
> > >               Config opc=0x1111, dpc=0x2222
> > >
> > >       The warning is fine, as understandably we have to sit
> > > silet and wait for the other side to send us something,
> > > so we can guess the point codes.
> > >
> > >       As you see - the command 'ss7 show links' will show you
> > > the opc and dpc parameters being used.
> > >
> > >       The patch can be found at:
> > >
> > >       http://www.ss7.pl/~jacke/patches/chan_ss7/chan_ss7-0.9.p
> > >atch-2.gz
> > >
> > >       (in the combined form, with the previous chan_ss7 0.9
> > > patch by ss7.pl)
> > >
> > >       If you have any questions - drop me a note.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com<http://easynews.com/>--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061205/e72a22a6/attachment-0001.htm