[asterisk-ss7] Some Feature-Questions.
Marc Storck
mstorck at voipgate.com
Sun Dec 3 10:04:48 MST 2006
Hello Goke,
I had already found that, I only forgot to report it here. Sorry and
thanks for the help.
Best regards,
Marc
Goke Aruna wrote:
> Marc,
>
> there is a mistake in the ss7.conf
>
> the link l2 was pointed to wrong linkset.
>
> linkset defined is V9FF
>
> the linkset you are pointing to on link l2 is LUXV9FF
>
> can you correct that and see what the change would be?
>
> goksie
>
>
> Marc Storck wrote:
>> Thanks Peter,
>>
>> I changed that to 1 line, unfortunately this didn't do it yet. Do you
>> have any other advise?
>>
>> Best regards,
>>
>> Marc
>>
>> Peter Demeter wrote:
>>> Marc,
>>>
>>> Why two lines for links?
>>> links => l1:1
>>> links => l2:2
>>>
>>> Please try the format what Goksie suggested:
>>> links => l1:1,l2:2
>>>
>>> Regards,
>>> Peter
>>>
>>> On 11/29/06, *Marc Storck* <mstorck at voipgate.com
>>> <mailto:mstorck at voipgate.com>> wrote:
>>>
>>> Hello Peter,
>>>
>>> here is my ss7.conf
>>>
>>> [linkset-TG1]
>>> enabled => yes
>>> enable_st => no
>>> use_connect => no
>>> hunting_policy => even_mru
>>> context => FROM-TG1
>>> language => en
>>> t35 => 4000,st
>>> subservice => auto
>>>
>>> [linkset-V9FF]
>>> enabled => yes
>>> enable_st => no
>>> use_connect => no
>>> hunting_policy => even_mru
>>> context => FROM-V9FF
>>> language => en
>>> t35 => 4000,st
>>> subservice => auto
>>>
>>> [link-l1]
>>> linkset => TG1
>>> channels => 2-31
>>> schannel => 1
>>> firstcic => 1
>>> enabled => yes
>>>
>>> [link-l2]
>>> linkset => LUXV9FF
>>> channels => 1-31
>>> schannel =>
>>> firstcic => 33
>>> enabled => yes
>>>
>>> [host-004-15-7]
>>> enabled => yes
>>> opc => 0x27f
>>> default_linkset => TG1
>>> dpc => TG1:0x108,V9FF:0x108
>>> links => l1:1
>>> links => l2:2
>>>
>>> Best regards,
>>>
>>> Marc
>>>
>>> Peter Demeter wrote:
>>> > Hi,
>>> >
>>> > It seems that the remote switch thinks that you have CIC 33
>>> whitin the
>>> > linkset, but your side configured differently. May I see your
>>> > ss7.config file?
>>> >
>>> > Regards,
>>> > Peter
>>> >
>>> > On 11/28/06, *Marc Storck* <mstorck at voipgate.com
>>> <mailto:mstorck at voipgate.com>
>>> > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>>
>>> wrote:
>>> >
>>> > When the remote switch (an ericsson switch, so this is a
>>> "real" link)
>>> > sends messages to me for the CIC 33 and above, I see these
>>> messages:
>>> >
>>> > Nov 28 17:32:48 WARNING[658]: l4isup.c:4071 l4isup_event:
>>> Received
>>> > CIC=33 for unequipped circuit (typ=GRS), link 'l1'.
>>> >
>>> > DO you have an advise for me?
>>> >
>>> > Best regards,
>>> >
>>> > Marc
>>> >
>>> > Goke Aruna wrote:
>>> > > I tested that config on chan_ss7 and its working fine.
>>> I dont
>>> > know of libss7
>>> > >
>>> > > goksie
>>> > >
>>> > > On 11/28/06, *Marc Storck* < mstorck at voipgate.com
>>> <mailto:mstorck at voipgate.com>
>>> > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>
>>> > > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>
>>> <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>>> wrote:
>>> > >
>>> > > In the mean time I tested this overhere, but with
>>> only two
>>> > links (1
>>> > > link
>>> > > for each linkset), only the first link has an
>>> schannel.
>>> > >
>>> > > Using this config the channels on l2 stay in Idle
>>> Reset
>>> > pending status,
>>> > > trying to block and unblock channels has the following
>>> results:
>>> > >
>>> > > Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598
>>> > > do_group_circuit_block_unblock: Sending CIRCUIT GROUP
>>> > BLOCKING, cic=33,
>>> > > mask=0x00000001.
>>> > > Nov 28 16:56:39 WARNING[658]: mtp.c:1669
>>> mtp_thread_main: No
>>> > signalling
>>> > > links inservice and no cluster receivers alive,
>>> dropping packet!
>>> > >
>>> > > Blocking and unblocking request from far end are
>>> ignored as
>>> > no CICs are
>>> > > assigned to linkset to which schannel from l1 is
>>> assigned.
>>> > >
>>> > > The ss7 driver however does not complain about the
>>> config
>>> > itself, so
>>> > > either the config error checking isn't checking this,
>>> or the
>>> > driver
>>> > > takes the binding of Schannel ==> linlkset to
>>> strictly....
>>> > >
>>> > > Who can tell???
>>> > >
>>> > > Thanks,
>>> > >
>>> > > Marc
>>> > >
>>> > > Goke Aruna wrote:
>>> > > > yes... with chan_ss7.
>>> > > >
>>> > > > i have this sample and its working now.
>>> > > >
>>> > > > [linkset-xyz]
>>> > > > enabled => yes
>>> > > > enable_st => no
>>> > > > use_connect => no
>>> > > > hunting_policy => seq_lth
>>> > > > subservice => auto
>>> > > > language => en
>>> > > > context => xyz-out
>>> > > >
>>> > > > [linkset-abc]
>>> > > > enabled => yes
>>> > > > enable_st => no
>>> > > > use_connect => no
>>> > > > hunting_policy => seq_lth
>>> > > > subservice => auto
>>> > > > language => en
>>> > > > context => abc-out
>>> > > >
>>> > > > [link-l1]
>>> > > > linkset => xyz
>>> > > > channels => 1-15,17-31
>>> > > > schannel => 16
>>> > > > firstcic => 1
>>> > > > echocancel=allways
>>> > > > echocan_taps=32
>>> > > > echocan_train=350
>>> > > > enabled => yes
>>> > > >
>>> > > > [link-l2]
>>> > > > linkset => xyz
>>> > > > channels => 1-15,17-31
>>> > > > schannel =>
>>> > > > firstcic => 33
>>> > > > echocancel=allways
>>> > > > echocan_taps=32
>>> > > > ;echocan_train=350
>>> > > > enabled => yes
>>> > > >
>>> > > > [link-l3]
>>> > > > linkset => abc
>>> > > > channels => 1-15,17-31
>>> > > > schannel =>
>>> > > > firstcic => 65
>>> > > > echocancel=allways
>>> > > > echocan_taps=32
>>> > > > ;echocan_train=350
>>> > > > enabled => yes
>>> > > >
>>> > > > [link-l4]
>>> > > > linkset => abc
>>> > > > channels => 1-15,17-31
>>> > > > schannel =>
>>> > > > firstcic => 97
>>> > > > echocancel=allways
>>> > > > echocan_taps=32
>>> > > > ;echocan_train=350
>>> > > > enabled => yes
>>> > > >
>>> > > > [host-myhost]
>>> > > > enabled => yes
>>> > > > opc => 609
>>> > > > default_linkset => xyz
>>> > > > dpc => xyz:223,abc:223
>>> > > > links => l1:1,l2:2,l3:3,l4:4
>>> > > >
>>> > > >
>>> > > > i have this ss7.conf
>>> > > >
>>> > > > and its working for me.
>>> > > >
>>> > > > that is question number 1.
>>> > > >
>>> > > > i think question number 2 should not be a question
>>> since u
>>> > said u
>>> > > used
>>> > > > the two box to test before.
>>> > > >
>>> > > > goksie
>>> > > >
>>> > > >
>>> > > > asterisk at nicox.org <mailto:asterisk at nicox.org>
>>> <mailto: asterisk at nicox.org <mailto:asterisk at nicox.org>> <mailto:
>>> > asterisk at nicox.org <mailto:asterisk at nicox.org>
>>> <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>>> wrote:
>>> > > >> Is noone there who can answer my questions?
>>> > > >>
>>> > > >> :-(
>>> > > >>
>>> > > >>
>>> > > >> On Wed, 22 Nov 2006, asterisk at nicox.org
>>> <mailto:asterisk at nicox.org>
>>> > <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>>
>>> > > <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>
>>> <mailto: asterisk at nicox.org <mailto:asterisk at nicox.org>>> wrote:
>>> > > >>
>>> > > >>> Hello,
>>> > > >>>
>>> > > >>> I have some feature-questions.
>>> > > >>>
>>> > > >>> 1.)
>>> > > >>> I have one Asterisk Box with SS7 and 4 E1 Ports.
>>> > > >>> i have one Telco with 4 Routings, a a high
>>> quality
>>> > routing, a
>>> > > quality
>>> > > >>> Routing a cheap routing and a cheaper routing.
>>> > > >>> The telco did not give me 4 SS7 Signalling Links.
>>> > > >>> Is it Possible to get this running with chan_ss7
>>> or libss7?
>>> > > >>>
>>> > > >>>
>>> > > >>>
>>> > > >>> 2.)
>>> > > >>> I have 2 Asterisk boxes and one SS7-Signalling
>>> Link, is it
>>> > > possible to
>>> > > >>> make the signalling for the second box with the
>>> > Signalling link
>>> > > on the
>>> > > >>> first Box?
>>> > > >>>
>>> > > >>>
>>> > > >>>
>>> > > >>> Thanks a lot for your help
>>> > > >>>
>>> > > >>>
>>> > > >>> Nico
>>> > > >>>
>>> > > >>> _______________________________________________
>>> > > >>> --Bandwidth and Colocation provided by
>>> Easynews.com <http://Easynews.com>
>>> > <http://Easynews.com>
>>> > > <http://Easynews.com> --
>>> > > >>>
>>> > > >>> asterisk-ss7 mailing list
>>> > > >>> To UNSUBSCRIBE or update options visit:
>>> > > >>>
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> > > <
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7>
>>> > > >>>
>>> > > >> _______________________________________________
>>> > > >> --Bandwidth and Colocation provided by
>>> Easynews.com <http://Easynews.com>
>>> > < http://Easynews.com>
>>> > > <http://Easynews.com> --
>>> > > >>
>>> > > >> asterisk-ss7 mailing list
>>> > > >> To UNSUBSCRIBE or update options visit:
>>> > > >>
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> > > >>
>>> > > >
>>> > > > _______________________________________________
>>> > > > --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com>
>>> > <http://Easynews.com>
>>> > > < http://Easynews.com> --
>>> > > >
>>> > > > asterisk-ss7 mailing list
>>> > > > To UNSUBSCRIBE or update options visit:
>>> > > >
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> > > _______________________________________________
>>> > > --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com>
>>> > <http://Easynews.com>
>>> > > < http://Easynews.com> --
>>> > >
>>> > > asterisk-ss7 mailing list
>>> > > To UNSUBSCRIBE or update options visit:
>>> > >
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> > >
>>> > >
>>> > >
>>> > >
>>> >
>>> ------------------------------------------------------------------------
>>> > >
>>> > > _______________________________________________
>>> > > --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com>
>>> > <http://Easynews.com> --
>>> > >
>>> > > asterisk-ss7 mailing list
>>> > > To UNSUBSCRIBE or update options visit:
>>> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> > _______________________________________________
>>> > --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com>
>>> > <http://Easynews.com> --
>>> >
>>> > asterisk-ss7 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> >
>>> >
>>> >
>>> >
>>>
>>> ------------------------------------------------------------------------
>>>
>>> >
>>> > _______________________________________________
>>> > --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com> --
>>> >
>>> > asterisk-ss7 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com
>>> <http://Easynews.com> --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> <http://lists.digium.com/mailman/listinfo/asterisk-ss7>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
More information about the asterisk-ss7
mailing list