[asterisk-speech-rec] Hang while loading res_speech_lumenvox.so

[sysadmin at airlinksystems.com]

Hi,

     I have asterisk 1.4.10 (compiled from the tar.gz release) on Fedora Core 7 ( 32 bit of course ).   I downloaded asterisk-1.4.x-lumenvox-support-linux-i686-32bit-b16-engine7.5.tar.gz from the LumenVox "Download Software" section, and I copied the res_speech_lumenvox.so to /usr/lib/asterisk/modules.

      When I start up asterisk, asterisk seems to hang up or freeze when it gets to the point where it would read in res_speech_lumenvox.so.  Here are the symptoms:

1) asterisk -rvvvvvv hangs with this on screen:
[root at web1 etc]# asterisk -rvvvvvv
Asterisk 1.4.10, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf': Found
  == Parsing '/etc/asterisk/extconfig.conf': Found

( I think this is because it can't connect to the running asterisk )

2) Incoming calls just ring and ring (same reason)

3) The last thing in the /var/log/asterisk/full log is some messages that come right before the first res_speech_lumenvox.so messages on my working Fedora Core 4 asterisk/lumenvox setups (about loading res_crypto.so)  (However, there is no error message at all from an lumenvox code)

4) lsof shows the res_speech_lumenvox.so file open by the asterisk process

If I remove /usr/lib/asterisk/modules/res_speech_lumenvox.so then asterisk starts up, but of course SpeechCreate doesn't work.

I do have res_speech.so marked as "preload" in /etc/asterisk/modules.conf, and I can see where it was loaded in the full log.

If I do "ldd" on res_speech_lumenvox.so, I do not show any missing libraries.

Has anyone else had this problem ?

--Rob

========
Rob Ristroph
Airlink Systems, Inc