<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><br><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Buenos días Moises, </div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Tuve el mismo inconveniente con el Astribank de Xorcom, estaba tratando de configurarlo en un Asterisk 1.8, cuando enviaba la llamada por el Astribank solamente me tomaba el primer canal, y la llamada se escuchaba de manera correcta pero por los otros canales no funcionaba, me comunique con la operadora telefónica y me indicaron que no veían que tomara el canal, realice la misma prueba pero conectando el E1 a la tarjeta Digium que tengo en el Asterisk y funciono perfecto, tomaba todos los canales sin inconveniente. </div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">La solución fue instalar Elastix versión 2.4.0 (Estable), es el que esta certificado para trabajar con con el Astribank de Xorcom, actualmente lo tengo configurado de esa forma y funciona perfecto. </div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Que distribución de Asterisk estas utilizando?</div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Cualquier duda te puedo ayudar a configurar el Elastix con el Astribank.</div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Saludos,</div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);"><br></div><div style="line-height: 22.719999313354492px; color: rgb(68, 68, 68); font-family: Calibri; background-color: rgb(255, 255, 255);">Beatriz Belmar</div><div> </div><br><br><div>> From: asterisk-r2-request@lists.digium.com<br>> Subject: asterisk-r2 Digest, Vol 71, Issue 2<br>> To: asterisk-r2@lists.digium.com<br>> Date: Thu, 24 Jul 2014 12:43:41 -0500<br>> <br>> Send asterisk-r2 mailing list submissions to<br>> asterisk-r2@lists.digium.com<br>> <br>> To subscribe or unsubscribe via the World Wide Web, visit<br>> http://lists.digium.com/mailman/listinfo/asterisk-r2<br>> or, via email, send a message with subject or body 'help' to<br>> asterisk-r2-request@lists.digium.com<br>> <br>> You can reach the person managing the list at<br>> asterisk-r2-owner@lists.digium.com<br>> <br>> When replying, please edit your Subject line so it is more specific<br>> than "Re: Contents of asterisk-r2 digest..."<br>> <br>> <br>> Today's Topics:<br>> <br>> 1. Re: Fwd: Problema con Astribank y E1 R2 (Oscar Rocha)<br>> <br>> <br>> ----------------------------------------------------------------------<br>> <br>> Message: 1<br>> Date: Thu, 24 Jul 2014 12:43:54 -0500<br>> From: Oscar Rocha <orochamty@hotmail.com><br>> To: "asterisk-r2@lists.digium.com" <asterisk-r2@lists.digium.com><br>> Subject: Re: [asterisk-r2] Fwd: Problema con Astribank y E1 R2<br>> Message-ID: <BLU180-W3567DB40EC725C7436A888B7FF0@phx.gbl><br>> Content-Type: text/plain; charset="iso-8859-1"<br>> <br>> Es debido a un problema con el m?dulo DAHDI de Asterisk, a partir de la versi?n 2.7 tiene problemas con se?alizaci?n R2. Lo que debes hacer es bajar de versi?n el DAHDI a la 2.6.<br>> <br>> Date: Thu, 24 Jul 2014 11:01:55 -0500<br>> From: wrioram@gmail.com<br>> To: asterisk-r2@lists.digium.com<br>> Subject: [asterisk-r2] Fwd: Problema con Astribank y E1 R2<br>> <br>> Tengo problemas para conectarme a la central Ericsson del<br>> proveedor de servicios usando un Astribank de XORCOM con dos E1 R2 configurados<br>> con todos los canales bidireccionales.<br>> <br>> <br>> La PBX y la central p?blica se conectan y las llamadas entran<br>> y salen pero solo por el canal uno de cada uno de los E1. Si la comunicaci?n en<br>> cualquier direcci?n se intenta por otro canal que no sea los mencionados la<br>> central y la PBX intercambian se?alizaci?n pero antes de intercambiar del n?mero<br>> marcado la central publica corta la comunicaci?n.<br>> <br>> <br>> A continuaci?n los logs de una llamada fallida por el canal 3 de un flujo. Incluyo tambi?n algunos ficheros de<br>> configuraci?n.<br>> <br>> --- Log de llamada fallida de salida de la PBX:<br>> <br>> [10:02:04:529]<br>> [Thread: 3055549328] [Chan 3] - Call started at Tue Jul 15 10:02:04 2014 on<br>> chan 3 [openr2 version 1.3.3, revision (release)]<br>> <br>> [10:02:04:529] [Thread: 3055549328] [Chan 3] - Outgoing call proceeding:<br>> ANI=2637120, DNIS=052867339, Category=National Subscriber<br>> <br>> [10:02:04:529] [Thread: 3055549328] [Chan 3] - CAS Tx >> [SEIZE]<br>> 0x00<br>> <br>> [10:02:04:529] [Thread: 3055549328] [Chan 3] - CAS Raw Tx >> 0x01<br>> <br>> [10:02:04:529] [Thread: 3055549328] [Chan 3] - scheduled timer id 2<br>> (r2_seize)<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Bits changed from 0x08 to<br>> 0x0C<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - CAS Rx << [SEIZE ACK]<br>> 0x0C<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Attempting to cancel timer timer<br>> 2<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - timer id 2 found, cancelling it<br>> now<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - MFC/R2 call acknowledge!<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Sending DNIS digit 0<br>> <br>> [10:02:04:601] [Thread: 3055549328] [Chan 3] - MF Tx >> 0 [ON]<br>> <br>> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Bits changed from 0x0C to<br>> 0x00<br>> <br>> [10:02:46:468] [Thread: 3055549328] [Chan 3] - CAS Rx << [FORCED RELEASE]<br>> 0x00<br>> <br>> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Disconnection before accept<br>> detected!<br>> <br>> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Far end disconnected. Reason:<br>> Forced Release<br>> <br>> [10:02:46:469] [Thread: 3055549328] [Chan 3] - Attempting to cancel timer timer<br>> 0<br>> <br>> [10:02:46:469] [Thread: 3055549328] [Chan 3] - Cannot cancel timer 0<br>> <br>> [10:02:46:469] [Thread: 3055549328] [Chan 3] - CAS Tx >> [CLEAR FORWARD]<br>> 0x08<br>> <br>> [10:02:46:469] [Thread: 3055549328] [Chan 3] - CAS Raw Tx >> 0x09<br>> <br>> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Bits changed from 0x00 to<br>> 0x08<br>> <br>> [10:02:46:500] [Thread: 3067456400] [Chan 3] - CAS Rx << [IDLE]<br>> 0x08<br>> <br>> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Call ended<br>> <br>> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Attempting to cancel timer timer<br>> 0<br>> <br>> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Cannot cancel timer 0<br>> <br>> <br>> <br>> <br>> -----Archivos de Configuraci?n.--------<br>> <br>> <br>> <br>> -----system.conf<br>> <br>> <br>> <br>> <br>> # This file is parsed by the Dahdi<br>> Configurator, dahdi_cfg<br>> <br>> #<br>> <br>> # Span 1: XBUS-00/XPD-00 "Xorcom XPD<br>> [usb:X1061826].1: E1" (MASTER) HDB3 ClockSource <br>> <br>> span=1,0,0,cas,hdb3<br>> <br>> cas=1-15:1101<br>> <br>> cas=17-31:1101<br>> <br>> echocanceller=oslec,1-31<br>> <br>> <br>> <br>> # Span 2: XBUS-00/XPD-01 "Xorcom XPD<br>> [usb:X1061826].2: E1" HDB3 <br>> <br>> span=2,0,0,cas,hdb3<br>> <br>> cas=32-46:1101<br>> <br>> cas=48-62:1101<br>> <br>> echocanceller=oslec,32-62<br>> <br>> <br>> <br>> # Span 3: XBUS-01/XPD-00 "Xorcom XPD<br>> [usb:X1061392].1: FXS" <br>> <br>> fxoks=63<br>> <br>> echocanceller=oslec,63<br>> <br>> fxoks=64<br>> <br>> echocanceller=oslec,64<br>> <br>> fxoks=65<br>> <br>> echocanceller=oslec,65<br>> <br>> fxoks=66<br>> <br>> echocanceller=oslec,66<br>> <br>> fxoks=67<br>> <br>> echocanceller=oslec,67<br>> <br>> fxoks=68<br>> <br>> echocanceller=oslec,68<br>> <br>> fxoks=69<br>> <br>> echocanceller=oslec,69<br>> <br>> fxoks=70<br>> <br>> echocanceller=oslec,70<br>> <br>> # astbanktype: output<br>> <br>> fxoks=71<br>> <br>> echocanceller=oslec,71<br>> <br>> # astbanktype: output<br>> <br>> fxoks=72<br>> <br>> echocanceller=oslec,72<br>> <br>> # astbanktype: input<br>> <br>> fxoks=73<br>> <br>> echocanceller=oslec,73<br>> <br>> # astbanktype: input<br>> <br>> fxoks=74<br>> <br>> echocanceller=oslec,74<br>> <br>> # astbanktype: input<br>> <br>> fxoks=75<br>> <br>> echocanceller=oslec,75<br>> <br>> # astbanktype: input<br>> <br>> fxoks=76<br>> <br>> echocanceller=oslec,76<br>> <br>> <br>> <br>> # Span 4: XBUS-01/XPD-10 "Xorcom XPD<br>> [usb:X1061392].2: FXO" <br>> <br>> fxsks=77<br>> <br>> echocanceller=oslec,77<br>> <br>> fxsks=78<br>> <br>> echocanceller=oslec,78<br>> <br>> fxsks=79<br>> <br>> echocanceller=oslec,79<br>> <br>> fxsks=80<br>> <br>> echocanceller=oslec,80<br>> <br>> fxsks=81<br>> <br>> echocanceller=oslec,81<br>> <br>> fxsks=82<br>> <br>> echocanceller=oslec,82<br>> <br>> fxsks=83<br>> <br>> echocanceller=oslec,83<br>> <br>> fxsks=84<br>> <br>> echocanceller=oslec,84<br>> <br>> <br>> <br>> # Global data<br>> <br>> <br>> <br>> loadzone =<br>> us<br>> <br>> defaultzone =<br>> us<br>> <br>> <br>> <br>> --------------<br>> <br>> ---------chan_dahdi.conf<br>> <br>> [trunkgroups]<br>> <br>> <br>> <br>> [channels]<br>> <br>> context=from-pstn<br>> <br>> language=es<br>> <br>> usecallerid=yes<br>> <br>> usecallingores=yes<br>> <br>> callwaiting=yes<br>> <br>> callwaitingcallerid=yes<br>> <br>> threewaycalling=yes<br>> <br>> transfer=yes<br>> <br>> canpark=yes<br>> <br>> cancallforward=yes<br>> <br>> callreturn=yes<br>> <br>> echocancelwhenbridged=yes<br>> <br>> echotraining=800<br>> <br>> relaxdtmf=yes<br>> <br>> busydetect=yes<br>> <br>> busycount=3<br>> <br>> rxgain=0.0<br>> <br>> txgain=0.0<br>> <br>> inmediate=no<br>> <br>> <br>> <br>> ;Group for Span1 channels<br>> <br>> group=1<br>> <br>> context=from-pstn<br>> <br>> signalling=mfcr2<br>> <br>> mfcr2_variant=itu<br>> <br>> mfcr2_get_ani_first=yes<br>> <br>> mfcr2_max_ani=10<br>> <br>> mfcr2_max_dnis=10<br>> <br>> mfcr2_category=national_subscriber<br>> <br>> mfcr2_logdir=span1<br>> <br>> mfcr2_loggin=all<br>> <br>> mfcr2_max_call_files=yes<br>> <br>> mfcr2_mfback_timeout=-1<br>> <br>> mfcr2_metering_pulse_timeout=-1<br>> <br>> echocancel=yes<br>> <br>> channel => 1-15,17-31,32-46,48-62<br>> <br>> <br>> <br>> #include dahdi-channels.conf<br>> <br>> #include chan_dahdi_additional.conf<br>> <br>> <br>> <br>> -- <br>> _____________________________________________________________________<br>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --<br>> <br>> asterisk-r2 mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> http://lists.digium.com/mailman/listinfo/asterisk-r2 <br>> -------------- next part --------------<br>> An HTML attachment was scrubbed...<br>> URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140724/11a453b9/attachment.html><br>> <br>> ------------------------------<br>> <br>> _______________________________________________<br>> --Bandwidth and Colocation Provided by http://www.api-digital.com--<br>> <br>> asterisk-r2 mailing list<br>> To UNSUBSCRIBE or update options visit:<br>> http://lists.digium.com/mailman/listinfo/asterisk-r2<br>> <br>> End of asterisk-r2 Digest, Vol 71, Issue 2<br>> ******************************************<br></div> </div></body>
</html>