<div> </div>
<div>  Hi ,</div>
<div> </div>
<div>  I have a system up and running , integrated with legacy PBX Nec Neax 2000 . I&#39;m using asterisknow 1.7 , a digium card TE407P ( E1 ) and openr2 1.2 ( native from asterisknow ) in Brazil .</div>
<div> </div>
<div>  The only issue i have is :</div>
<div> </div>
<div>   - When i apply changes on freepbx ( create an extensios ) and reload it ,my channels get Seize and the only way to back this to the normal state , Idle , is restart asterisk ( tx channels get back to Idle but RX are 0x00 ) and then disconnect the cable from balun and connect again . After do this all channels get back to idle state and i&#39;m able to make and receive calls .</div>

<div> </div>
<div>  So , do you have an idea about how to fix this ?.</div>
<div> </div>
<div>   Thanks in advance !</div>
<div> </div>
<div>     Marcio .</div>
<div>  </div>