<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.32.2">
</HEAD>
<BODY>
Thanks Moy.<BR>
The only problem I have now is that when I activate r2proto.conf with 'mfcr2_advanced_protocol_file=/usr/etc/r2proto.conf' the E1 no longer works because I suspect that the settings in this file are not conform with what we should have in Mexico. Can I comment out all other parameters (which means it should take the 'mx' defaults) and just add the 'timer.cas_persistance_check=100'?<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Sebastian Peschko <<A HREF="mailto:speschko@gmail.com">speschko@gmail.com</A>><BR>
<BR>
</TD>
</TR>
</TABLE>
On Wed, 2011-05-11 at 10:54 -0400, Moises Silva wrote:
<BLOCKQUOTE TYPE=CITE>
On Wed, May 11, 2011 at 8:33 AM, Sebastian Peschko <<A HREF="mailto:speschko@gmail.com">speschko@gmail.com</A>> wrote:
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BLOCKQUOTE>
Moy,<BR>
question for you: Is there a general parameter in the mfcR2 where 'glitches' like the one here can be filtered or ignored? For example: a change in signal (like in this case 0x04 to 0x00 to 0x04) in less than 50 or 100 milliseconds would not make a change unless the new state is active for longer than this number of ms.<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<BR>
</TD>
</TR>
</TABLE>
</BLOCKQUOTE>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BR>
<BR>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
You can try using the advanced protocol file. See sample for details, the advanced parameter is timers.cas_persistence_check=100
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BR>
<BR>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
That will not react on CAS signals immediately, but wait 100ms, if the signal persist it will handle it, otherwise will ignore it (if the signal gets back to the previous state). I have not tested that parameter in a while but should still work.
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BR>
Moises Silva<BR>
Senior Software Engineer, Software Development Manager<BR>
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada<BR>
t. 1 905 474 1990 x128 | e. <A HREF="mailto:moy@sangoma.com">moy@sangoma.com</A><BR>
<BR>
<BR>
<BR>
</BLOCKQUOTE>
</BODY>
</HTML>