<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.32.2">
</HEAD>
<BODY>
Thanks Moy. As always you're the man! <BR>
This worked and our customer is happy. This seems to be related to glitches that Telmex has on their lines and is loosing signaling for very short periods of time 20 or 30 ms. We have some of their "planta externa" out there now checking. We'll have to keep the pressure up to get the source of this problem resolved. It looks like this is also related to the bad copper quality and the Watson adapter they have installed with the customer.<BR>
<BR>
Here is the summary of what we have done to compensate for the state changes originally mentioned.<BR>
We added the following line to /etc/asterisk/chan_dahdi.conf:<BR>
mfcr2_advanced_protocol_file=/usr/etc/r2proto.conf<BR>
<BR>
In /usr/etc/r2proto.conf we commented out all lines except one:<BR>
timer.cas_persistance_check=100<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Sebastian Peschko <<A HREF="mailto:speschko@gmail.com">speschko@gmail.com</A>><BR>
<BR>
</TD>
</TR>
</TABLE>
On Wed, 2011-05-11 at 10:29 -0500, Sebastian Peschko wrote:<BR>
<BLOCKQUOTE TYPE=CITE>
OK. ....first time around didn't work...I'll try again. Thanks.<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Sebastian Peschko <<A HREF="mailto:speschko@gmail.com">speschko@gmail.com</A>><BR>
<BR>
<BR>
</TD>
</TR>
</TABLE>
On Wed, 2011-05-11 at 11:15 -0400, Moises Silva wrote: <BR>
<BLOCKQUOTE TYPE=CITE>
On Wed, May 11, 2011 at 11:12 AM, Sebastian Peschko <<A HREF="mailto:speschko@gmail.com">speschko@gmail.com</A>> wrote:<BR>
<BLOCKQUOTE>
Thanks Moy.<BR>
The only problem I have now is that when I activate r2proto.conf with 'mfcr2_advanced_protocol_file=/usr/etc/r2proto.conf' the E1 no longer works because I suspect that the settings in this file are not conform with what we should have in Mexico. Can I comment out all other parameters (which means it should take the 'mx' defaults) and just add the 'timer.cas_persistance_check=100'?<BR>
<BR>
</BLOCKQUOTE>
<BR>
<BR>
Yes<BR>
<BR>
Moises Silva<BR>
Senior Software Engineer, Software Development Manager<BR>
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada<BR>
t. 1 905 474 1990 x128 | e. <A HREF="mailto:moy@sangoma.com">moy@sangoma.com</A><BR>
<BR>
<BR>
<BR>
<BR>
</BLOCKQUOTE>
</BLOCKQUOTE>
</BODY>
</HTML>