<div>Am really sorry for what am about to ask but i think i've to. So basically am very new with R2, i need to get my asterisk server up for the next 2 hours. my problem is i've installed Trixbox 2.6 and, donwload openr2-1.3.0.tar.gz, download openr2-asterisk-1.4.32-p1.patch and now stucked on how to integrate them. what is the best way for my solution, how should i run the patch ?<br clear="all">
</div><div><br></div><div>[trixbox1 1]# cat /proc/zaptel/*<br>Span 1: R1T1/0 "Rhino R1T1 E1/PRA Card 0" (MASTER) HDB3/ ClockSource<br><br> 1 R1T1/0/1 CAS<br> 2 R1T1/0/2 CAS<br> 3 R1T1/0/3 CAS<br>
4 R1T1/0/4 CAS<br> 5 R1T1/0/5 CAS<br> 6 R1T1/0/6 CAS<br> 7 R1T1/0/7 CAS<br> 8 R1T1/0/8 CAS<br> 9 R1T1/0/9 CAS<br> 10 R1T1/0/10 CAS<br> 11 R1T1/0/11 CAS<br>
12 R1T1/0/12 CAS<br> 13 R1T1/0/13 CAS<br> 14 R1T1/0/14 CAS<br> 15 R1T1/0/15 CAS<br> 16 R1T1/0/16 HDLCFCS<br> 17 R1T1/0/17 CAS<br> 18 R1T1/0/18 CAS<br> 19 R1T1/0/19 CAS<br>
20 R1T1/0/20 CAS<br> 21 R1T1/0/21 CAS<br> 22 R1T1/0/22 CAS<br> 23 R1T1/0/23 CAS<br> 24 R1T1/0/24 CAS<br> 25 R1T1/0/25 CAS<br> 26 R1T1/0/26 CAS<br> 27 R1T1/0/27 CAS<br>
28 R1T1/0/28 CAS<br> 29 R1T1/0/29 CAS<br> 30 R1T1/0/30 CAS<br> 31 R1T1/0/31 CAS<br><br></div><div>zaptel.conf<br></div><div><br></div><div>span=1,1,0,cas,hdb3<br>cas=1-15:1101<br>cas=17-31:1101<br>
loadzone=us<br>defaultzone=us<br></div><div><br></div><div>from where should start? i went through the pdf document on <a href="http://code.google.com/p/openr2/downloads/list">http://code.google.com/p/openr2/downloads/list</a> but no clue for the installation.</div>
<div><br></div><div>Need !!</div>