Yes, it's a Physical loop, i connect the cable that comes with the card to a balun whith a coaxial cable connected between RX in and TX in.<div><br></div><div>I think that is the interaction between the wanpipe and asterisk, because i did the same with another card but digium and everything is working fine, in the CLI when i connect or disconnect the loop appears the alarms.</div>
<div><br></div><div>Thanks.</div><div><br></div><div>Miguel I.</div><div><br></div><div><br><br><div class="gmail_quote">On Mon, Jun 14, 2010 at 11:26 AM, Moises Silva <span dir="ltr"><<a href="mailto:moises.silva@gmail.com">moises.silva@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Green is always good :-)<br><br>But that's just good from the E1 layer point of view meaning you can tx and receive data.<br>
<br>There is more that one kind of loop you can do. Which type of loop are you talking about? physical loop with a crossover cable between 2 ports in the card?<br>
<br clear="all">Moises Silva<br>Senior Software Engineer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com" target="_blank">moy@sangoma.com</a><br>
<br><br><div class="gmail_quote"><div><div></div><div class="h5">On Mon, Jun 14, 2010 at 12:17 PM, Miguel Infante B. <span dir="ltr"><<a href="mailto:minfante@abanet.mx" target="_blank">minfante@abanet.mx</a>></span> wrote:<br>
</div></div><blockquote class="gmail_quote" style="border-left:1px solid rgb(204, 204, 204);margin:0pt 0pt 0pt 0.8ex;padding-left:1ex"><div><div></div><div class="h5">
Hello everyone...<div><br></div><div>I'm installing openr2 with a Sangoma E1 Card (A101) and i'm following the procedure posted by Moy in the openr2 webpage and the Sangoma's procedure for R2.</div><div>
<br></div><div>First i install Dahdi-2.3.0, then libpri-1.4.11.2, wanpipe-3.5.11 and asterisk-1.6.2.8.</div><div>Everything looks well, but when i make a loop in the card the mfcr2 channels are blocked in the CLI and the card led is green.</div>
<div>when i remove the loop nothing happens in the CLI and the led is red.</div><div>Sometimes when i restart the services with the loop, the mfcr2 channels are idle but when i disconnect it are idle.</div><div><br></div>
<div>In the CLI doesn't appear any alarms associated with the card when i connect or remove the loop.</div><div><br></div><div>Does anyone has happened somthig similar?</div><div><br></div><div><br></div><div>Hola a todos...</div>
<div><br></div><div>Estoy instalando openr2 con una tarjeta Sangoma E1 (A101) y estoy siguiendo el procedimiento publicado por Moy en la pagina de openr2 y el procedimiento de Sangoma para R2.</div><div><br></div><div>Primero instale el Dahdi-2.3.0, luego libpri-1.4.11.2, wanpipe-3.5.11 y asterisk-1.6.2.8.</div>
<div>Todo se ve bien, pero cuando conecto un loop, los canales están bloqueados en el CLI y el led de la tarjeta esta en verde.</div><div>Cuando quito el loop no pasa nada en el CLI y el led de la tarjeta esta en rojo.</div>
<div>Algunas veces cuando reinicio los servicios con el loop, los canales mfcr2 están en idle y si lo desconecto siguen en idle.</div><div><br></div><div>En el CLI no aparece ninguna alarma relacionada con la tarjeta cuando conecto o quito el loop.</div>
<div><br></div><div>A alguien le ha pasado algo similar?</div><div><br></div>
<br></div></div>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br></div>