Dear all.<br>I have an issue with an Asterisk installation, It is base on Elastix Distro, so I think the issue is with the Asterisk Version and openr2 lib, I post this information here, If somebody can help me, I appreciate any information.<br>
<br>I am using Elastix 1.5.2 in Xorcom unit with digital E1 (R2, Variant ve), All channels and E1 link were recognized, in fact I can do test with r2test.conf file, (I am using openr2-1.2.0). I have made and received calls during the test well.<br>
<br>Ok, the issue that I have I can't run "dahdi show channels" command on Asterisk CLI, so that indicate to me channels are not in use by Asterisk.<br><br>
When I tried to start Asterisk , I can't run Dahdi show channels
command, and on the web interface all channels have the message "not in
use".<br>
<br>next is some information to evaluate my case: <br><br>Best regards.<br>A. -Asterisk Version: asterisk-1.4.24<br>
<br>B. lsdahdi output:<br>
### Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: E1" (MASTER) HDB3/ ClockSource <br>
1 E1 CAS (SWEC: MG2) <br>
.......to channel 15<br>
16 E1 HDLCFCS <br>
17 E1 CAS (SWEC: MG2) <br>
.....to channel 31<br>
31 E1 CAS (SWEC: MG2) <br>
### Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: E1" HDB3/ <br>
32 E1 CAS (SWEC: MG2) <br>
......to channel 47<br>
47 E1 HDLCFCS <br>
48 E1 CAS (SWEC: MG2) <br>
......to channel 62 <br>
62 E1 CAS (SWEC: MG2) <br>
<br>
C. When I tried loading chan_dahdi module on Asterisk CLI, next is the output: <br>
CLI output:<br>
module unload chan_dahdi.so <br>
== Unregistered application 'DAHDISendKeypadFacility'<br>
== Unregistered application 'ZapSendKeypadFacility'<br>
module load chan_dahdi.so <br>
== Registered application 'DAHDISendKeypadFacility'<br>
== Registered application 'ZapSendKeypadFacility'<br>
== Parsing '/etc/asterisk/chan_dahdi.conf': Found<br>
== Parsing '/etc/asterisk/dahdi-channels.conf': Found<br>
== Parsing '/etc/asterisk/chan_dahdi_additional.conf': Found<br>
<br>
D. Parameters in chan_dahdi.conf<br>
group=1<br>
context=from-internal<br>
signalling =mfcr2<br>
mfcr2_variant=ve<br>
mfcr2_get_ani_first=no<br>
mfcr2_max_ani=10<br>
mfcr2_max_dnis=4<br>
mfcr2_category=national_subscriber<br>
mfcr2_logdir=log<br>
mfcr2_call_files=yes<br>
mfcr2_logging=all<br>
channel => 1-15<br>
channel => 32-46<br>
<br>
group=2<br>
context=from-zaptel<br>
signalling =mfcr2<br>
mfcr2_variant=ve<br>
mfcr2_get_ani_first=no<br>
mfcr2_max_ani=10<br>
mfcr2_max_dnis=4<br>
mfcr2_category=national_subscriber<br>
mfcr2_logdir=log<br>
mfcr2_call_files=yes<br>
mfcr2_logging=all<br>
channel => 17-31<br>
channel => 48-62<br clear="all"><br>-- <br> José A. Martínez B<br> Analista de Sistemas<br> <a href="mailto:baldalloj@gmail.com">baldalloj@gmail.com</a><br> <a href="mailto:baldalloj@hotmail.com">baldalloj@hotmail.com</a> <br>
<br>