<HTML>
<HEAD>
<TITLE>Re: [asterisk-r2] Activating openr2 afterwards</TITLE>
</HEAD>
<BODY>
<FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Got it working. What you suggested was right. Changed Makefile in channels to look for libopenr2.so.1 instead of libopenr2.so.0 but also had to MAKE and MAKE INSTALL zaptel.<BR>
<BR>
I had assumed it was done when asterisk was first installed but as I found out the hard way, it was not. After getting zaptel running, reinstalle openr2 and the recompiled asterisk with the patch and correction to bug In channels/Makefile.<BR>
<BR>
Thanks much.<BR>
<BR>
Hector<BR>
<BR>
<BR>
On 9/29/09 10:33 AM, "Hector Bustillo Lopez" <<a href="hectorb@continental.hn">hectorb@continental.hn</a>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Thanks much for the prompt reply.<BR>
<BR>
I am using asterisk 1.2.24, zaptel 1.2.22.1 and openr2-asterisk-1.2.30.3.patch<BR>
<BR>
I just need to recompile and install asterisk with the patch in a way that openr2 is active and right now it seems that it is not being accomplished. It appears that all the folders are not being overwritten because I can see messages stating “nothing to do.....” in several folders when running MAKE and MAKE INSTALL for the patched asterisk.<BR>
<BR>
Basically I need a procedure to install Openr2 after the fact of using asterisk without it for a while.<BR>
<BR>
Thanks in advance.<BR>
<BR>
Hector<BR>
<BR>
<BR>
On 9/28/09 6:21 PM, "Carlos Rangel" <<a href="crangeltpmex@hotmail.com">crangeltpmex@hotmail.com</a>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
<BR>
You need to provide more info.<BR>
<BR>
What version of asterisk??<BR>
What version of zaptel or dahdi??<BR>
WHat patch did you use??<BR>
<BR>
<BR>
<BR>
________________________________<BR>
> From: <a href="hectorb@continental.hn">hectorb@continental.hn</a><BR>
> To: <a href="asterisk-r2@lists.digium.com">asterisk-r2@lists.digium.com</a><BR>
> Date: Sun, 27 Sep 2009 21:27:54 -0600<BR>
> Subject: [asterisk-r2] Activating openr2 afterwards<BR>
><BR>
><BR>
><BR>
><BR>
><BR>
><BR>
><BR>
><BR>
> Hello.<BR>
><BR>
><BR>
><BR>
> I have been running asterisk with freepbx succesfuly for more than a year. I have the need toinstall and activate Openr2.<BR>
><BR>
><BR>
><BR>
> I have downloaded and installed openr2 with no errors. I have also downloaded and applied the asterisk patch (1.2) and have run the two commands MAKE and MAKE INSTALL for asterisk with no errors.<BR>
><BR>
><BR>
><BR>
> I think the new version of asterisk did not install correctly because of the following:<BR>
><BR>
><BR>
><BR>
> [root@asterisk2 ~]# ldd channels/chan_zap.so | grep openr2<BR>
><BR>
> ldd: channels/chan_zap.so: No such file or directory<BR>
><BR>
><BR>
><BR>
> How do I recompile and install asterisk with the patch and make it active? It seems that the MAKE and MAKE INSTALL command check to see if there is a previuos installation and do not replace libraries. Am I right?<BR>
><BR>
><BR>
><BR>
> How Do I replace asterisk only with the new patched version without affecting the the whole Freepbx installation?<BR>
><BR>
><BR>
><BR>
> Can I make a backup and erase certain folders to make the new patched asterisk active and the restore the ettings backup?<BR>
><BR>
><BR>
><BR>
> What should be the right procedure?<BR>
><BR>
><BR>
><BR>
> Thanks in advance,<BR>
><BR>
><BR>
><BR>
> Hector<BR>
><BR>
> <BR>
_________________________________________________________________<BR>
Comparte tu vida en Perfil de Windows Live. Actualízalo ya!<BR>
<a href="http://www.actualizatuperfil.com.mx/">http://www.actualizatuperfil.com.mx/</a><BR>
<BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT></BLOCKQUOTE>
</BODY>
</HTML>