<div>Hi everyone, i have this problem, i look in asterisk cli with mfcr2 show channels this:</div>
<div> </div>
<div>Asterisk 1.4.25.1</div>
<div>Openr2.1.1.0</div>
<div> </div>
<div> </div>
<div>Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS<br> 1 AR 20 4 No No IDLE BLOCK<br> 2 AR 20 4 No No IDLE BLOCK<br>
3 AR 20 4 No No IDLE BLOCK<br> 4 AR 20 4 No No IDLE BLOCK<br> 5 AR 20 4 No No IDLE BLOCK<br>
6 AR 20 4 No No IDLE BLOCK<br> 7 AR 20 4 No No IDLE BLOCK<br> 8 AR 20 4 No No IDLE BLOCK<br>
9 AR 20 4 No No IDLE BLOCK<br> 10 AR 20 4 No No IDLE BLOCK<br> 11 AR 20 4 No No IDLE BLOCK<br>
12 AR 20 4 No No IDLE BLOCK<br> 13 AR 20 4 No No IDLE BLOCK<br> 14 AR 20 4 No No IDLE BLOCK<br>
15 AR 20 4 No No IDLE BLOCK<br> 17 AR 20 4 No No IDLE BLOCK<br> 18 AR 20 4 No No IDLE BLOCK<br>
19 AR 20 4 No No IDLE BLOCK<br> 20 AR 20 4 No No IDLE BLOCK<br> 21 AR 20 4 No No IDLE BLOCK<br>
22 AR 20 4 No No IDLE BLOCK<br> 23 AR 20 4 No No IDLE BLOCK<br> 24 AR 20 4 No No IDLE BLOCK<br>
25 AR 20 4 No No IDLE BLOCK<br> 26 AR 20 4 No No IDLE BLOCK<br> 27 AR 20 4 No No IDLE BLOCK<br>
28 AR 20 4 No No IDLE BLOCK<br> 29 AR 20 4 No No IDLE BLOCK<br> 30 AR 20 4 No No IDLE BLOCK<br>
31 AR 20 4 No No IDLE BLOCK<br></div>
<div> </div>
<div>my /etc/dahdi/system.conf</div>
<div> </div>
<div> </div>
<div>#Sangoma A101 port 1 [slot:4 bus:12 span:1] <wanpipe1><br>span=1,0,0,ccs,hdb3<br>cas=1-15:1101<br>cas=17-31:1101</div>
<div> </div>
<div> </div>
<div>my /etc/asterisk/chan_dahdi.conf</div>
<div> </div>
<div>[channels]<br>context=default<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>
callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>relaxdtmf=yes<br>rxgain=0.0<br>txgain=0.0<br>;group=1<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br>group=1<br>context=from-pstn<br>signalling=mfcr2<br>
mfcr2_variant=ar<br>mfcr2_get_ani_first=no<br>mfcr2_max_ani=20<br>mfcr2_max_dnis=4<br>mfcr2_category=national_subscriber<br>mfcr2_mfback_timeout=-1<br>mfcr2_metering_pulse_timeout=-1<br>; this is for debugging purposes<br>
mfcr2_logdir=log<br>mfcr2_logging=all<br>; end debugging configuration<br>channel => 1-15<br>channel => 17-31<br></div>
<div>My status card is Green OK</div>
<div> </div>
<div>I have the same configuration with the same hardware in another city of my Country Colombia, in Bogota, the problem i have is in Villavicencio.</div>
<div> </div>
<div><br>-- <br>Juan Carlos Gonzalez C.<br></div>