[asterisk-r2] Fwd: Delay - Outgoing calls

[Aleks Honma]

Just to add one info to this case trying to funnel down the problem.

Althought reluctant, today I got a telco's technician to come over to
update Cisco 2900 IOS. After that they connect their testing equipment
direct to the router's E1 interface and they made a test call from it. The
result is that their test call was as fast as having our Legacy PBX
connected to it. So I guess with that we rule out a possible router
firmware version problem for MFCR2.


On Sat, May 28, 2016 at 4:18 PM, Aleks Honma <aleks.honma at gmail.com> wrote:

> Sure, how do I run the trace in openr2?
>
> I am sending attached
> - extract from Asterisk "full" log file
> - call file
> - and Asterisk CLI output
>
> Here is an extract for the "full" log file showing an 8 second delay.
>
> [2016-05-28 15:50:18] DEBUG[6547][C-00000000] chan_dahdi.c: Chan 1 -
> Sending category National Subscriber
> [2016-05-28 15:50:23] DEBUG[6559] manager.c: Running action 'Login'
> [2016-05-28 15:50:23] DEBUG[6559] manager.c: Running action 'Command'
> [2016-05-28 15:50:23] DEBUG[6559] manager.c: Running action 'Command'
> [2016-05-28 15:50:23] DEBUG[6559] manager.c: Running action 'Command'
> [2016-05-28 15:50:24] DEBUG[5740] chan_sip.c: Auto destroying SIP dialog
> '_q_cRCFvo58BQH0taqD0xw..'
> [2016-05-28 15:50:24] DEBUG[5740] chan_sip.c: Destroying SIP dialog
> _q_cRCFvo58BQH0taqD0xw..
> [2016-05-28 15:50:26] DEBUG[6547][C-00000000] chan_dahdi.c: Enabled echo
> cancellation on channel 1
> [2016-05-28 15:50:26] VERBOSE[6547][C-00000000] chan_dahdi.c: MFC/R2 call
> has been accepted on forward channel 1
>
> I thought that enabling the mf_g1_tones.no_more_dnis_available=F would
> affect just group 0, channels 1-15,17-31 (from SPAN1, my E1 - Telco), but
> it seems to be a global config to all channels affecting also group 1,
> channels 32-46,48-62 (from SPAN2, legacy pbx).  The option worked great
> when calling my SIP phone, but "killed" my legacy PBX returning "ERROR[914]
> chan_dahdi.c: MFC/R2 protocol error on chan 56: Multi Frequency Cycle
> Timeout". So I had to disable it. :-(
>
> On Fri, May 27, 2016 at 1:16 PM, Moises Silva <moises.silva at gmail.com>
> wrote:
>
>> On Thu, May 26, 2016 at 1:39 PM, Aleks Honma <aleks.honma at gmail.com>
>> wrote:
>>
>>> Moises you probably already know that, but man you rock!
>>>
>>> Timer is gone and I get connected 3s earlier, so from 8s in my test we
>>> have gone done to 5s.
>>>
>>
>> Good :)
>>
>>
>>> Now the issue seems that it is taking way too much time between sending
>>> out digits for ANI and DNIS. On my test above I was dialing just 5 digits
>>> (10315) that that is why it was taking 8s. For regular phone number where I
>>> dial 021ZZ XXXX-XXXX it takes about 15 seconds or more.
>>>
>>> Is there any option to tweak this ?
>>>
>>
>> It may be a similar issue. Can I see the Asterisk debug log for this? or
>> the openr2 protocol trace?
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20160601/89bfe0aa/attachment.html>