[asterisk-r2] Incoming Calls hungup using MFCR2 Protocol - unhandled 2nd category request ?

[Moises Silva]

>
> [11:40:47:448] [Thread: 3062889360] [Chan 24] - M - Done getting DNIS!
> [11:40:47:448] [Thread: 3062889360] [Chan 24] - M - By-passing B/II
> signals, accept the call with signal 0x0
>

You have a bug somewhere in your configuration. Signal 0x0 is not valid to
accept the call, this should be the signal for 'Address Complete, Charge
Setup'. The letter 'M' in the log lines indicates your configuration is
used the advanced protocol file, but the Asterisk configuration you pasted
does not indicate that. You have somewhere mfcr2_advanced_protocol_file=xxx
in your chan)dahdi configuration and that's probably messing things up.

Moises Silva

Manager, Software Engineering



Sangoma Technologies

100 Renfrew Drive, Suite 100, Markham, Ontario, Canada L3R 9R6

T +1 905 474 1990 x128 | toll-free in North America +1 800 388-2475 | F +1
905 474 9223

www.sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20150606/19f1e632/attachment.html>