[asterisk-r2] Fwd: Falha asterisk com sinalização r2d

natalia silva natalianew at gmail.com
Fri May 16 12:54:59 CDT 2014


I did contact with my telco and they tested many channels as the
signal no problems.

--------------------------------------------------------------------------------

good, it seems at your side basic openr2 parameters are configured, so
try to make a call and run again mfcr2 show channels should displayed
CAS activity in case still reporting you trace Seize Timeout Expired
please contact and complain to Telco (should response seizure
acknowledge).

good luck
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2><mailto:mcgrathr
at mail2web.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>>

________________________________
From: asterisk-r2-bounces at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>
[asterisk-r2-bounces at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>] On Behalf Of
natalia silva [natalianew at gmail.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>]
Sent: 16 May 2014 13:02
To: asterisk-r2 at lists.digium.com
<http://lists.digium.com/mailman/listinfo/asterisk-r2>
Subject: [asterisk-r2] Fwd: Falha asterisk com sinalização r2d


Hi

thanks for help

my channels are IDLE

asterisk*CLI> mfcr2 show channels
Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
   1 BR      10      4        Yes       No               IDLE     IDLE
   2 BR      10      4        Yes       No               IDLE     IDLE
   3 BR      10      4        Yes       No               IDLE     IDLE
   4 BR      10      4        Yes       No               IDLE     IDLE
   5 BR      10      4        Yes       No               IDLE     IDLE
   6 BR      10      4        Yes       No               IDLE     IDLE
   7 BR      10      4        Yes       No               IDLE     IDLE
   8 BR      10      4        Yes       No               IDLE     IDLE
   9 BR      10      4        Yes       No               IDLE     IDLE
  10 BR      10      4        Yes       No               IDLE     IDLE
  11 BR      10      4        Yes       No               IDLE     IDLE
  12 BR      10      4        Yes       No               IDLE     IDLE
  13 BR      10      4        Yes       No               IDLE     IDLE
  14 BR      10      4        Yes       No               IDLE     IDLE
  15 BR      10      4        Yes       No               IDLE     IDLE


________________________________________________________________


Hi

It seems a CAS problem, you can check with mfcr2 show channels, should
have something as the following;
CLI> mfcr2 show channels
Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
   1 BR      20      4        No        No               IDLE     IDLE
   ....
  15 BR      20      4        No        No               IDLE     IDLE

In case of RX CAS figured BLOCK please check with Telco.

good luck

Mc GRATH Ricardo
E-Mail mcgrathr at
mail2web.com<http://lists.digium.com/mailman/listinfo/asterisk-r2><mailto:mcgrathr
at mail2web.com<http://lists.digium.com/mailman/listinfo/asterisk-r2>>

________________________________
From: asterisk-r2-bounces at
lists.digium.com<http://lists.digium.com/mailman/listinfo/asterisk-r2>
[asterisk-r2-bounces at
lists.digium.com<http://lists.digium.com/mailman/listinfo/asterisk-r2>]
On Behalf Of natalia silva [natalianew at
gmail.com<http://lists.digium.com/mailman/listinfo/asterisk-r2>]
Sent: 16 May 2014 09:47
To: asterisk-r2 at
lists.digium.com<http://lists.digium.com/mailman/listinfo/asterisk-r2>
Subject: [asterisk-r2] Fwd: Falha asterisk com sinalização r2d



Hi, good afternoon
Dear I am in need of much help.
I'm sending here why the list has not adopted me, and I'm running out of time

I'm running

Asterisk 10.7.1 OpenR2 with version: 1.2.0, digium card.

And got the following error when making connections

- Executing [931091062 at
localphones<http://lists.digium.com/mailman/listinfo/asterisk-r2>:1]
Dial("SIP/4192-00000001", "DAHDI/g1/31091062,60") in new stack
    -- Called DAHDI/g1/31091062
[May 15 09:56:05] NOTICE[15718]: chan_dahdi.c:4191
dahdi_r2_on_line_blocked: Far end blocked on chan 3
[May 15 09:56:13] WARNING[15785]: chan_dahdi.c:4166
dahdi_r2_write_log: Chan 1 - Seize Timeout Expired!
[May 15 09:56:13] ERROR[15785]: chan_dahdi.c:4169 dahdi_r2_write_log:
Chan 1 - Protocol error. Reason = Seize Timeout, R2 State = Seize
Transmitted, MF state = MF Engine Off, MF Group = Forward MF init, CAS
= 0x08
DNIS = 31091062, ANI = 4192, MF = 0x20
[May 15 09:56:13] ERROR[15785]: chan_dahdi.c:3954
dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 1: Seize
Timeout
    -- Hungup 'DAHDI/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [931091062 at
localphones<http://lists.digium.com/mailman/listinfo/asterisk-r2>:2]
Hangup("SIP/4192-00000001", "") in new stack
  == Spawn extension (localphones, 931091062, 2) exited non-zero on
'SIP/4192-00000001'
[May 15 09:56:13] NOTICE[15718]: chan_dahdi.c:4200
dahdi_r2_on_line_idle: Far end unblocked on chan 3


Have made ​​sure to test and with the operator that the channels are
not blocked and there are no locks on her part.


follow my configs

system.conf

# Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) HDB3/ ClockSource
span=1,1,0,cas,hdb3
cas=1-15:1101
#bchan=1-15
#fxsks=1-15
# termtype: unknown
#bchan=1-15:1101
#dchan=16
#echocanceller=mg2,1-15

# Global data

loadzone        = br
defaultzone     = br


chan_dahdi.conf


[trunkgroups]

[channels]
signalling=mfcr2
mfcr2_variant=br
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_call_files=yes
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_immediate_accept=no
mfcr2_forced_release=no
mfcr2_charge_calls=yes
language=pt_BR
echocancel=yes
echocancelwhenbridged=no
context=e1
callgroup=0
pickupgroup=0
group=1
channel=>1-15



I thank you in advance for help.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140516/777f6641/attachment-0001.html>


More information about the asterisk-r2 mailing list