[asterisk-r2] error al cargar modulo de dahdi

Sun May 27 11:11:47 CDT 2012

yo se que en asterisk 1.4 camina, pero en 1.6 no lo hace, dicen que en
asterisk 10 funciona, pero no se aun nadie al que le haya funcionado, esas
fallas raras que tu tienes se parecen a las que yo tenia cuando intente
actualizar mi servidor a asterisk 1.6, finalmente lo volvi a montar en 1.4
y todo bien....

2012/5/27 Yuliesky Bello <yulitico at gmail.com>

> estoy usando
>
> Asterisk 10.0.4
> Dahdi 2.6.1
> libopenr2 1.3.2
>
> gracias por responder
>
> 2012/5/26 Jose Daniel Yribarren <jdyribarren at compusan.com.ve>:
> > hola, que versión de asterisk y dahdi tienes,
> >
> > 2012/5/24 Yuliesky Bello <yulitico at gmail.com>
> >>
> >> Buenas
> >>
> >> Cunado intento cargar el modulo de dahdi desde el CLI de asterisk me
> >> arroja el siguiente error
> >>
> >> [2012-05-24 20:05:12] WARNING[4165]: chan_dahdi.c:12732 mkintf:
> >> Attempt to configure channel 1 with signaling MFC/R2 ignored because
> >> it is already configured to be MFC/R2.
> >>
> >> Version de asterisk 10.0.4
> >> version de dahdi 2.6.1
> >>
> >> El proveedor de servicios me entrega un E1 fraccionado 1-15 entrantes
> >> y 17-31 saliente
> >>
> >> MFCR2 entrante
> >> DTMF/R2 saliente
> >>
> >>
> >>
> >> Los ficheros configurados son:
> >>
> >> CHAN DAHDI
> >>
> >> [trunkgroups]
> >>
> >> [channels]
> >> context=from-pstn
> >> signalling=fxs_ks
> >> rxwink=300              ; Atlas seems to use long (250ms) winks
> >> usecallerid=yes
> >> hidecallerid=no
> >> callwaiting=yes
> >> usecallingpres=yes
> >> callwaitingcallerid=yes
> >> threewaycalling=yes
> >> transfer=yes
> >> canpark=yes
> >> cancallforward=yes
> >> callreturn=yes
> >> echocancel=yes
> >> echocancelwhenbridged=no
> >> faxdetect=incoming
> >> echotraining=800
> >> rxgain=0.0
> >> txgain=0.0
> >> callgroup=1
> >> pickupgroup=1
> >>
> >> ;Uncomment these lines if you have problems with the disconection of
> >> your analog lines
> >> ;busydetect=yes
> >> ;busycount=3
> >>
> >>
> >> immediate=yes
> >>
> >> #include dahdi-channels.conf
> >> #include chan_dahdi_additional.conf
> >>
> >>
> >> DAH I CHANEL:
> >>
> >> ; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 24 18:10:46 2012
> >> ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> >> ; your manual changes will be LOST.
> >> ; Dahdi Channels Configurations (chan_dahdi.conf)
> >> ;
> >> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is
> >> intended
> >> ; to be #include-d by /etc/chan_dahdi.conf that will include the global
> >> settings
> >> ;
> >>
> >> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/ RED
> >> group=1
> >>
> >> context=from-pstn
> >> signalling=mfcr2
> >> mfcr2_variant=ve
> >> mfcr2_get_ani_first=yes
> >> mfcr2_immediate_accept=no
> >> mfcr2_max_ani=10
> >> mfcr2_max_dnis=4
> >> mfcr2_category=national_subscriber
> >> mfcr2_logdir=cantv
> >> mfcr2_logging=all
> >> channel => 1-15
> >>
> >> group=2
> >> context=from-pstn
> >> signalling=mfcr2
> >> mfcr2_variant=ve
> >> mfcr2_dtmf_detection=1
> >> mfcr2_dtmf_dialing=1
> >> mfcr2_logdir=cantv
> >> mfcr2_logging=all
> >> channel => 17-31
> >>
> >> ; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) B8ZS/ESF RED
> >> group=0,12
> >> context=from-pstn
> >> switchtype = national
> >> signalling = pri_cpe
> >> channel => 32-54
> >> context = default
> >> group = 63
> >>
> >> SYSTEM.CONF.:
> >>
> >> # Autogenerated by /usr/sbin/dahdi_genconf on Thu May 24 18:10:46 2012
> >> # If you edit this file and execute /usr/sbin/dahdi_genconf again,
> >> # your manual changes will be LOST.
> >> # Dahdi Configuration File
> >> #
> >> # This file is parsed by the Dahdi Configurator, dahdi_cfg
> >> #
> >> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/ RED
> >> span=1,1,0,cas,hdb3
> >> cas=1-15:1101
> >> cas=17-31:1101
> >> echocanceller=mg2,1-15,17-31
> >>
> >> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) B8ZS/ESF RED
> >> span=2,2,0,esf,b8zs
> >> # termtype: te
> >> bchan=32-54
> >> dchan=55
> >> echocanceller=mg2,32-54
> >>
> >> # Global data
> >>
> >> loadzone    = ve
> >> defaultzone    = ve
> >>
> >> --
> >> Saludos.
> >>
> >> Ing. Yuliesky Bello Chávez.
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-r2 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> >
> >
> >
> > --
> > Jose Daniel Yribarren C
> > Soporte Tecnico
> >
> > Compusan C.A
> > J-31585717-0
> >
> >
> >
> > Av Bolivar Sector La Yaguara, Galpon G-02,
> > San Carlos, Edo Cojedes, Venezuela
> > 0258-4337811   0426 5468037
> >
> >
> >
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> --
> Saludos.
>
> Ing. Yuliesky Bello Chávez.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

-- 
*Jose Daniel Yribarren C*
*Soporte Tecnico

**Compusan C.A**
*J-31585717-0

Av Bolivar Sector La Yaguara, Galpon G-02,
San Carlos, Edo Cojedes, Venezuela
0258-4337811   0426 5468037
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120527/9212007e/attachment.htm>