[asterisk-r2] asterisk-r2 Digest, Vol 45, Issue 2

Mon May 7 11:07:52 CDT 2012

Hello Mariano, tu deberias probar con la variante R2 para Bolivia.
With the command:  *mfcr2 show variants* you can see the variants of r2.

Test this configuration:

signalling=mfcr2
mfcr2_variant=Bo
mfcr2_get_ani_first=no
mfcr2_max_ani=8 *;-> 8 digits so? are usually 10 digits*
mfcr2_max_dnis=7 *;-> are usually 4 digits*
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all
mfcr2_mfback_timeout=-1 ;tiempo de conetestacion *; comment this line*
mfcr2_metering_pulse_timeout=-1 ;  *; comment this line*
mfcr2_allow_collect_calls=no ;  *; comment this line*
mfcr2_double_answer=no ;  *; comment this line*
mfcr2_immediate_accept=no ;  *; comment this line*
;mfcr2_advanced_protocol_file = /usr/etc/r2proto.conf
mfcr2_forced_release=yes ;  *; comment this line, the release will sent 4
you provider*
mfcr2_charge_calls=yes ;  *; comment this line*
mfcr2_max_call_files=yes
mfcr2_call_files=yes

I hope I've been able to help.
Regards,

Benjamín Garzón

On Mon, May 7, 2012 at 12:38 PM, <asterisk-r2-request at lists.digium.com>wrote:

> Send asterisk-r2 mailing list submissions to
>        asterisk-r2 at lists.digium.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.digium.com/mailman/listinfo/asterisk-r2
> or, via email, send a message with subject or body 'help' to
>        asterisk-r2-request at lists.digium.com
>
> You can reach the person managing the list at
>        asterisk-r2-owner at lists.digium.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of asterisk-r2 digest..."
>
>
> Today's Topics:
>
>   1. How to enable "send A signal (ANI)" (Mariano Bianchi)
>   2. Re: How to enable "send A signal (ANI)" (Mc GRATH Ricardo)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 7 May 2012 12:17:13 -0300
> From: Mariano Bianchi <marianito.bianchi at gmail.com>
> Subject: [asterisk-r2] How to enable "send A signal (ANI)"
> To: asterisk-r2 at lists.digium.com
> Message-ID:
>        <CAN+2EA2OQrPSzbVheH_nFbHLt=C5niCf+_WEhW5vmDpe-iJtYg at mail.gmail.com
> >
> Content-Type: text/plain; charset="utf-8"
>
> Hello everyone. May be some can help me.
> I have an E1 in Bolivia. I want to enable the outgoing A signal (ANI) to
> the telco, because I can not make outgoing calls, but I do can receive
> calls.
> According to the telco, when they disable the requirement of A signal, the
> calls are OK, but it changes the data of billing system.
> I am attaching conf files.
> I have also tried with ar br and itu variants, with no luck.
> Thanks for your help.
>
> system.conf
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> echocanceller=oslec,1-15,17-31
> # Global data
>
> loadzone       = br
> defaultzone    = br
>
> chan_dahdi.conf
>
> [trunkgroups]
>
> [channels]
> context=from-pstn
> language=es
> signalling=fxs_ks
> rxwink=300        ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes ;cambio
> faxdetect=incoming
> echotraining=800
> relaxdtmf=yes  ; add
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
>
> resetinterval=never
>
> signalling=mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=8
> mfcr2_max_dnis=7
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
> mfcr2_mfback_timeout=-1 ;tiempo de conetestacion
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=no
> mfcr2_immediate_accept=no
> ;mfcr2_advanced_protocol_file = /usr/etc/r2proto.conf
> mfcr2_forced_release=yes
> mfcr2_charge_calls=yes
> mfcr2_max_call_files=yes
> mfcr2_call_files=yes
>
> ;Uncomment these lines if you have problems with the disconection of your
> analog lines
> busydetect=yes
> busycount=3
>
>
> immediate=no
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
> dahdi-channels.conf
> ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: E1" (MASTER) HDB3/CCS/CRC4
> group=11
> context=from-pstn
> channel =>1-15,17-31
>
> I am also attaching the logs.
> Thanks in advance for your help.
> Regards,
>
>
> ? Mariano ?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20120507/4093c1e3/attachment-0001.htm
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: chan-1-backward-1-20120505151529.call
> Type: application/octet-stream
> Size: 10264 bytes
> Desc: not available
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20120507/4093c1e3/attachment-0001.obj
> >
>
> ------------------------------
>
> Message: 2
> Date: Mon, 7 May 2012 11:27:52 -0400
> From: Mc GRATH Ricardo <mcgrathr at mail2web.com>
> Subject: Re: [asterisk-r2] How to enable "send A signal (ANI)"
> To: "asterisk-r2 at lists.digium.com" <asterisk-r2 at lists.digium.com>
> Message-ID:
>        <39F8F0A9F90D5C48A847177B56A22567F4723D41D3 at MBX81.ad2.softcom.biz>
> Content-Type: text/plain; charset="iso-2022-jp"
>
> Hi Mariano!
>
> Could give more detail when you refer to send A signal (ANI) to the Telco.
> According to outgoing process call it should be requested by the Telco by
> sending A5 moreover ANI Group I should be send on the second A5 request,
> first A5 is calling category (PBX side).
> ANI process should be complete by sending I-15.
> Could be possible to send an outgoing trace log?
> Good luck!
>
>
> Mc GRATH Ricardo
> E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>
>
> ________________________________
> From: asterisk-r2-bounces at lists.digium.com [
> asterisk-r2-bounces at lists.digium.com] On Behalf Of Mariano Bianchi [
> marianito.bianchi at gmail.com]
> Sent: 07 May 2012 12:17
> To: asterisk-r2 at lists.digium.com
> Subject: [asterisk-r2] How to enable "send A signal (ANI)"
>
> Hello everyone. May be some can help me.
> I have an E1 in Bolivia. I want to enable the outgoing A signal (ANI) to
> the telco, because I can not make outgoing calls, but I do can receive
> calls.
> According to the telco, when they disable the requirement of A signal, the
> calls are OK, but it changes the data of billing system.
> I am attaching conf files.
> I have also tried with ar br and itu variants, with no luck.
> Thanks for your help.
>
> system.conf
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> echocanceller=oslec,1-15,17-31
> # Global data
>
> loadzone       = br
> defaultzone    = br
>
> chan_dahdi.conf
>
> [trunkgroups]
>
> [channels]
> context=from-pstn
> language=es
> signalling=fxs_ks
> rxwink=300        ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes ;cambio
> faxdetect=incoming
> echotraining=800
> relaxdtmf=yes  ; add
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
>
> resetinterval=never
>
> signalling=mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=8
> mfcr2_max_dnis=7
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
> mfcr2_mfback_timeout=-1 ;tiempo de conetestacion
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=no
> mfcr2_immediate_accept=no
> ;mfcr2_advanced_protocol_file = /usr/etc/r2proto.conf
> mfcr2_forced_release=yes
> mfcr2_charge_calls=yes
> mfcr2_max_call_files=yes
> mfcr2_call_files=yes
>
> ;Uncomment these lines if you have problems with the disconection of your
> analog lines
> busydetect=yes
> busycount=3
>
>
> immediate=no
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
> dahdi-channels.conf
> ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: E1" (MASTER) HDB3/CCS/CRC4
> group=11
> context=from-pstn
> channel =>1-15,17-31
>
> I am also attaching the logs.
> Thanks in advance for your help.
> Regards,
>
>
> ? Mariano ?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20120507/c02e1f7c/attachment.htm
> >
>
> ------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> End of asterisk-r2 Digest, Vol 45, Issue 2
> ******************************************
>

-- 
Benjamín Garzón
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120507/29e21db6/attachment.htm>