[asterisk-r2] problema con actualizacion a dahdi 2.6 y E1 sin funcionar
Mc GRATH Ricardo
mcgrathr at mail2web.com
Wed Feb 15 14:11:55 CST 2012
I think when you upgrade Dahdi and others software you should recompiled and reinstall all software too, it mean Openr2 and asterisk or whatever.
As it you start he first time installation libpri -> Dahdi -> Asterisk.
It should help when problems happens to provide all details and countermeasure made.
Good luck
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com
________________________________________
From: asterisk-r2-bounces at lists.digium.com [asterisk-r2-bounces at lists.digium.com] On Behalf Of r0d0 [rodolfo at dic.ohc.cu]
Sent: 15 February 2012 16:57
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] problema con actualizacion a dahdi 2.6 y E1 sin funcionar
i had upgraded my distro form elastix 2.0.0 to elastix 2.2.0, after that
i recompiled libpri and dahdi because the new elastix 2.2.0 do not
recongnized my PSTN card (digium TE210P), after that everything ok but
my E1 isn't working, any change on this version of dahdi and openr2??
thank for everything
On 02/15/2012 02:43 PM, Gerardo Barajas wrote:
> Please Post in English.
>
> Saludos/Regards
> --
> Ing. Gerardo Barajas Puente
>
> Ingeniería | www.neocenter.com
> T:+52 (55) 8590-9000 x 7003
>
>
>
> 2012/2/15 r0d0<rodolfo at dic.ohc.cu>:
>>
>>
>> si descargue de digium y actualize pero, despues de actualizar la distro a
>> elastix 2.2.0. todo esta intanto pero tuve que reinstalar le libpri y el
>> dahdi para que reconociera la tarjeta( Digium TE210P ), despues de esto la
>> reconocio pero no logro echar a andar el enlace con la PSTN, con la opcion
>> de de seatear mg2 ya no dio mas errores, aparente mente el enlace E1 dice ok
>> pero no se comunica. alguna idea de que prueba hacer para ver en que estado
>> esta??
>>
>>
>> On 02/15/2012 01:52 PM, Jose Flores Galicia wrote:
>>>
>>> Hola r0d0.
>>> El error está frente a ti, tu versión de DAHDI nueva (me supongo la
>>> descargaste de digium y compilaste) no incluye el modulo de cancelador
>>> OSLEC, sin embargo en tu configuración lo quieres usar.
>>>
>>> 2 Soluciones.
>>>
>>> - Recompilas DAHDI con el cancelador OSLEC. Aqui hay una muy buena liga
>>> de información: http://www.rowetel.com/blog/?page_id=454
>>> - Cambias la configuración por un cancelador que si tengas incluido,
>>> como mg2.
>>>
>>> Saludos
>>>
>>> José Flores Galicia
>>> SerITel
>>>
>>>
>>> 2012/2/15 Ing. León Ramos<leon.ramos at nucleum.com.mx
>>> <mailto:leon.ramos at nucleum.com.mx>>
>>>
>>>
>>> Hola!
>>>
>>> Has probado haciendo rollback de la versión?
>>>
>>> 2012/2/15 r0d0<rodolfo at dic.ohc.cu<mailto:rodolfo at dic.ohc.cu>>:
>>>
>>> > buenos dias a todos tuve un problema [3] despues de actualizar a
>>> la version
>>> > current de dahdi, he probado algunas posibles configuraciones
>>> encontradas
>>> > gogleando pero sigue sinfuncionar, alguna idea de cual es la config
>>> > correcta?? la configuracion anterior era [4] y trabajaba
>>> perfectamente.
>>> >
>>> > gracias de antemano
>>> >
>>> > [1]
>>> > # Autogenerated by /usr/sbin/dahdi_genconf on Wed Feb 15 12:00:18
>>> 2012
>>> > # If you edit this file and execute /usr/sbin/dahdi_genconf again,
>>> > # your manual changes will be LOST.
>>> > # Dahdi Configuration File
>>> > #
>>> > # This file is parsed by the Dahdi Configurator, dahdi_cfg
>>> > #
>>> > # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>> > span=1,0,0,cas,hdb3
>>> > cas=1-15,17-31:1101
>>> > #dchan=16
>>> > echocanceller=oslec,1-15,17-31
>>> >
>>> >
>>> >
>>> > # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>>> > #span=2,2,0,ccs,hdb3,crc4
>>> > # termtype: te
>>> > #bchan=32-46,48-62
>>> > #dchan=47
>>> >
>>> > # Global data
>>> >
>>> > loadzone = us
>>> > defaultzone = us
>>> >
>>> > [2]
>>> > service dahdi restart
>>> > Unloading DAHDI hardware modules: ERROR: Module wct4xxp is in use
>>> > ERROR: Module dahdi is in use by wct4xxp
>>> > error
>>> > Loading DAHDI hardware modules:
>>> > wct4xxp: [ OK ]
>>> >
>>> > Running dahdi_cfg: DAHDI_ATTACH_ECHOCAN failed on channel 1:
>>> Invalid
>>> > argument (22)
>>> > [FAILED]
>>> > [3]
>>> > dahdi_cfg -vvv
>>> > DAHDI Tools Version - 2.6.0
>>> >
>>> > DAHDI Version: 2.6.0
>>> > Echo Canceller(s): HWEC
>>> > Configuration
>>> > ======================
>>> >
>>> > SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>> >
>>> > Channel map:
>>> >
>>> > Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 01)
>>> > Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 02)
>>> > Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 03)
>>> > Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 04)
>>> > Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 05)
>>> > Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 06)
>>> > Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 07)
>>> > Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 08)
>>> > Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 09)
>>> > Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 10)
>>> > Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 11)
>>> > Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 12)
>>> > Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 13)
>>> > Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 14)
>>> > Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 15)
>>> > Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 17)
>>> > Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 18)
>>> > Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 19)
>>> > Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 20)
>>> > Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 21)
>>> > Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 22)
>>> > Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 23)
>>> > Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 24)
>>> > Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 25)
>>> > Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 26)
>>> > Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 27)
>>> > Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 28)
>>> > Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 29)
>>> > Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 30)
>>> > Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 31)
>>> >
>>> > 30 channels to configure.
>>> >
>>> > Setting echocan for channel 1 to oslec
>>> > DAHDI_ATTACH_ECHOCAN failed on channel 1: Invalid argument (22)
>>> > ~
>>> > [4]
>>> > # Global data
>>> > #***********************************
>>> > #Span1
>>> > span=1,0,0,cas,hdb3
>>> > cas=1-15:1101
>>> > dchan=16
>>> > cas=17-31:1101
>>> > echocanceller=oslec,1-15,17-31
>>> > --
>>> > Talk is cheap, show me the code!!!
>>> >
>>> >
>>> > --
>>> >
>>> _____________________________________________________________________
>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
>>> --
>>> >
>>> > asterisk-r2 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> > http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>>
>>> --
>>> Ing. León Alberto Ramos Mendoza
>>> Director General
>>> Meganúcleo S.A. de C.V.
>>> (55) 36260226 ext 1101
>>> leon.ramos at nucleum.com.mx<mailto:leon.ramos at nucleum.com.mx>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>> --
>> Talk is cheap, show me the code!!!
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
--
Talk is cheap, show me the code!!!
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-r2
More information about the asterisk-r2
mailing list