[asterisk-r2] caso extraño MFCR/R2 Venezuela

Tue Apr 10 11:56:05 CDT 2012

Muchas gracias por sus respuestas, realizare las pruebas y se los hare saber

Rahib que estas usando especificamente? alguna version de elastix?

saludos

El día 10 de abril de 2012 12:15, Carlos Andrés Tapasco Viera
<ctapasco at opengroupsa.com> escribió:
> Probaste la variante ITU en vez de VE?, en Colombia tuve un problema similar
> y lo resolví con la variante.
>
> El 10 de abril de 2012 11:42, Rabih R. Bou Orm A. <rabihbouorm at gmail.com>
> escribió:
>
>> Yuliesky,
>>
>> A esto me refería yo:
>>
>> group=1
>> signalling=mfcr2
>> mfcr2_variant=ve
>> mfcr2_get_ani_first=yes
>> mfcr2_immediate_accept=no
>> mfcr2_max_ani=10
>> mfcr2_max_dnis=4
>> mfcr2_category=national_subscriber
>> mfcr2_logdir=cantv
>> mfcr2_logging=all
>> channel => 1-15
>> ;CANTV ENTRANTE GRUPO1
>>
>>
>> group=2
>> signalling=mfcr2
>> mfcr2_variant=ve
>> mfcr2_dtmf_detection=1
>> mfcr2_dtmf_dialing=1
>> mfcr2_get_ani_first=yes
>> mfcr2_immediate_accept=yes
>> mfcr2_max_ani=10
>> mfcr2_max_dnis=4
>> mfcr2_category=national_subscriber
>> mfcr2_logdir=cantv
>> mfcr2_logging=all
>> mfcr2_mfback_timeout=-1
>> channel => 17-31
>> ;CANTV SALIENTE GRUPO 2
>>
>> Asi me andan perfectamente.
>> Saludos,
>> Rabih Bou
>>
>> El 10 de abril de 2012 12:07, Luis Morales <fastonion at gmail.com> escribió:
>>
>>> Estimado,
>>>
>>> Creo que por el comportamiento que reportas te instalaron MFCR2 tanto
>>> para entrantes como salientes.
>>>
>>> Configura el pool completo como mfcr2 y nos avisas los resultados,
>>>
>>> Saludos,
>>>
>>>
>>> 2012/4/10 Yuliesky Bello <yulitico at gmail.com>:
>>> > Buen dia, estoy usando asterisk 1.6 con el parche aplicado, estoy
>>> > usando mfc-r2 para los primeros 15 entrantes y dtmf-r2 para los 15
>>> > salientes, me funcionan las salientes pero solo cuando el el fichero
>>> > dahdi_channel comento la linea de los canales entrantes, por ejemplo:
>>> >
>>> > ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>> >
>>> > group=2
>>> > context=from-pstn
>>> > signalling=mfcr2
>>> > mfcr2_variant=ve
>>> > mfcr2_get_ani_first=yes
>>> > mfcr2_immediate_accept=yes
>>> > mfcr2_max_ani=10
>>> > mfcr2_max_dnis=4
>>> > mfcr2_category=national_subscriber
>>> > mfcr2_logging=all
>>> > mfcr2_metering_pulse_timeout=-1
>>> > mfcr2_allow_collect_calls=yes
>>> > mfcr2_charge_calls=yes
>>> > mfcr2_mfback_timeout=-1
>>> > mfcr2_dtmf_detection=no
>>> > mfcr2_dtmf_dialing=no
>>> > ;channel => 1-15     con esta linea comentada las llamadas salientes
>>> > funcionan sin problemas, sin embargo no me funcionan las entrantes, y
>>> > cuando descomento esta linea funcionan las entrantes pero las
>>> > salientes dejan de funcionar.
>>> >
>>> > group=0
>>> >
>>> > mfcr2_dtmf_detection=yes
>>> > mfcr2_dtmf_dialing=yes
>>> > channel => 17-31
>>> >
>>> > El día 9 de abril de 2012 15:32, Ettore Pelliccioni
>>> > <ettore.pelliccioni at techniclite.com> escribió:
>>> >> Hola.
>>> >>
>>> >> La sintaxis cuando el E1 es fraccionado tiene sus detalles, prueba
>>> >> hacer un mfcr2 show channels, para que veas cuales canales han tomado los
>>> >> valores apropiados.
>>> >>
>>> >> El dnis y ani no debe es igual en ambos casos.
>>> >>
>>> >> Tambien puedes probar ocupar un canal particular con la herramienta
>>> >> r2test.
>>> >>
>>> >> Saludos y suerte.
>>> >>
>>> >> Atentamente,
>>> >> Ing. Ettore Eliseo Pelliccioni Monrroy
>>> >>
>>> >> Tlf.:+58.212.7626555
>>> >> Móvil:+58.414.1111330
>>> >> Skype:ettore.pelliccioni
>>> >> eMail/msn: ettore.pelliccioni at techniclite.com
>>> >> Web site: www.techniclite.com
>>> >>
>>> >>
>>> >> This message may contain confidential information or privileged
>>> >> material, and is intended only for the individual(s) named. If you are not
>>> >> in the named address you should not disseminate, distribute or copy this
>>> >> e-mail. Please notify the sender immediately by e-mail if you have received
>>> >> this e-mail by mistake and delete this e-mail from your system.
>>> >> E-mail transmission cannot be guaranteed to be secure or error-free as
>>> >> information could be intercepted, corrupted, lost, destroyed, arrive late or
>>> >> incomplete, or contain viruses. The sender therefore does not accept
>>> >> liability for any errors or omissions in the contents of this message which
>>> >> arise as a result of e-mail transmission. If verification is required please
>>> >> request a hard-copy version.
>>> >>
>>> >> -----Original Message-----
>>> >> From: Yuliesky Bello <yulitico at gmail.com>
>>> >> Sender: asterisk-r2-bounces at lists.digium.com
>>> >> Date: Mon, 9 Apr 2012 14:28:59
>>> >> To: <asterisk-r2 at lists.digium.com>
>>> >> Reply-To: asterisk-r2 at lists.digium.com
>>> >> Subject: [asterisk-r2] caso extraño MFCR/R2 Venezuela
>>> >>
>>> >> Hola
>>> >>
>>> >> Tengo configurado un enlace E1 con 15 entrantes y 15 salientes, a
>>> >> continuación la configuración de los archivos:
>>> >>
>>> >> 1-15 -> Entrantes (CANTV - Venezuela MFC-R2)
>>> >> 17-31-> Salientes (CANTV - Venezuela DTMF-R2)
>>> >> Tengo creados dos troncales zap
>>> >>
>>> >> system.conf
>>> >>
>>> >> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>> >> span=1,1,0,cas,hdb3
>>> >> cas=1-15:1101
>>> >> cas=17-31:1101
>>> >> alaw=1-15,17-31
>>> >> echocanceller=oslec,1-15,17-31
>>> >>
>>> >> dahdi_channel.conf
>>> >>
>>> >> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>> >>
>>> >> group=1
>>> >> context=from-pstn
>>> >> signalling=mfcr2
>>> >> mfcr2_variant=ve
>>> >> mfcr2_get_ani_first=yes
>>> >> mfcr2_immediate_accept=yes
>>> >> mfcr2_max_ani=10
>>> >> mfcr2_max_dnis=4
>>> >> mfcr2_category=national_subscriber
>>> >> mfcr2_logging=all
>>> >> mfcr2_metering_pulse_timeout=-1
>>> >> mfcr2_allow_collect_calls=yes
>>> >> mfcr2_charge_calls=yes
>>> >> mfcr2_mfback_timeout=-1
>>> >> channel => 1-15
>>> >>
>>> >> group=0
>>> >>
>>> >> mfcr2_dtmf_detection=1
>>> >> mfcr2_dtmf_dialing=1
>>> >> channel => 17-31
>>> >>
>>> >> Ahora se me da un caso muy extraño, con este esquema las llamadas
>>> >> entrantes funcionan sin problemas, pero no las salientes, ahora cuando
>>> >> comento la linea channel => 1-15, las llamadas salientes se efectúan
>>> >> sin ningún problema, pero con la linea comentada no puedo hacer
>>> >> llamadas entrantes.
>>> >>
>>> >> --
>>> >> _____________________________________________________________________
>>> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> >>
>>> >> asterisk-r2 mailing list
>>> >> To UNSUBSCRIBE or update options visit:
>>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >> --
>>> >> _____________________________________________________________________
>>> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> >>
>>> >> asterisk-r2 mailing list
>>> >> To UNSUBSCRIBE or update options visit:
>>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>> >
>>> >
>>> > --
>>> > Saludos.
>>> >
>>> > Ing. Yuliesky Bello Chávez.
>>> >
>>> > --
>>> > _____________________________________________________________________
>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> >
>>> > asterisk-r2 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>>
>>> --
>>>
>>> ---------------------------------------------------------------------------------
>>> Luis Morales
>>> Consultor de Tecnologia
>>> Cel: +58(0412)2352745
>>> OpenID: http://lmorales.myopenid.com/
>>> Twitter: @magnadata
>>> Linux User ID : 470650
>>>
>>> ---------------------------------------------------------------------------------
>>> "Empieza por hacer lo necesario, luego lo que es posible... y de
>>> pronto estarás haciendo lo imposible"
>>>
>>> Leonardo Da'Vinci
>>>
>>> ---------------------------------------------------------------------------------
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
> --
> Carlos Andrés Tapasco Viera
> Junior Telecommunications Engineer
> Open Group Desarrollos Tecnológicos
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2

-- 
Saludos.

Ing. Yuliesky Bello Chávez.