[asterisk-r2] caso extraño MFCR/R2 Venezuela

Luis Morales fastonion at gmail.com
Tue Apr 10 11:37:52 CDT 2012


Estimado,

Creo que por el comportamiento que reportas te instalaron MFCR2 tanto
para entrantes como salientes.

Configura el pool completo como mfcr2 y nos avisas los resultados,

Saludos,


2012/4/10 Yuliesky Bello <yulitico at gmail.com>:
> Buen dia, estoy usando asterisk 1.6 con el parche aplicado, estoy
> usando mfc-r2 para los primeros 15 entrantes y dtmf-r2 para los 15
> salientes, me funcionan las salientes pero solo cuando el el fichero
> dahdi_channel comento la linea de los canales entrantes, por ejemplo:
>
> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>
> group=2
> context=from-pstn
> signalling=mfcr2
> mfcr2_variant=ve
> mfcr2_get_ani_first=yes
> mfcr2_immediate_accept=yes
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logging=all
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=yes
> mfcr2_charge_calls=yes
> mfcr2_mfback_timeout=-1
> mfcr2_dtmf_detection=no
> mfcr2_dtmf_dialing=no
> ;channel => 1-15     con esta linea comentada las llamadas salientes
> funcionan sin problemas, sin embargo no me funcionan las entrantes, y
> cuando descomento esta linea funcionan las entrantes pero las
> salientes dejan de funcionar.
>
> group=0
>
> mfcr2_dtmf_detection=yes
> mfcr2_dtmf_dialing=yes
> channel => 17-31
>
> El día 9 de abril de 2012 15:32, Ettore Pelliccioni
> <ettore.pelliccioni at techniclite.com> escribió:
>> Hola.
>>
>> La sintaxis cuando el E1 es fraccionado tiene sus detalles, prueba hacer un mfcr2 show channels, para que veas cuales canales han tomado los valores apropiados.
>>
>> El dnis y ani no debe es igual en ambos casos.
>>
>> Tambien puedes probar ocupar un canal particular con la herramienta r2test.
>>
>> Saludos y suerte.
>>
>> Atentamente,
>> Ing. Ettore Eliseo Pelliccioni Monrroy
>>
>> Tlf.:+58.212.7626555
>> Móvil:+58.414.1111330
>> Skype:ettore.pelliccioni
>> eMail/msn: ettore.pelliccioni at techniclite.com
>> Web site: www.techniclite.com
>>
>>
>> This message may contain confidential information or privileged material, and is intended only for the individual(s) named. If you are not in the named address you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.
>> E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
>>
>> -----Original Message-----
>> From: Yuliesky Bello <yulitico at gmail.com>
>> Sender: asterisk-r2-bounces at lists.digium.com
>> Date: Mon, 9 Apr 2012 14:28:59
>> To: <asterisk-r2 at lists.digium.com>
>> Reply-To: asterisk-r2 at lists.digium.com
>> Subject: [asterisk-r2] caso extraño MFCR/R2 Venezuela
>>
>> Hola
>>
>> Tengo configurado un enlace E1 con 15 entrantes y 15 salientes, a
>> continuación la configuración de los archivos:
>>
>> 1-15 -> Entrantes (CANTV - Venezuela MFC-R2)
>> 17-31-> Salientes (CANTV - Venezuela DTMF-R2)
>> Tengo creados dos troncales zap
>>
>> system.conf
>>
>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>> span=1,1,0,cas,hdb3
>> cas=1-15:1101
>> cas=17-31:1101
>> alaw=1-15,17-31
>> echocanceller=oslec,1-15,17-31
>>
>> dahdi_channel.conf
>>
>> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>
>> group=1
>> context=from-pstn
>> signalling=mfcr2
>> mfcr2_variant=ve
>> mfcr2_get_ani_first=yes
>> mfcr2_immediate_accept=yes
>> mfcr2_max_ani=10
>> mfcr2_max_dnis=4
>> mfcr2_category=national_subscriber
>> mfcr2_logging=all
>> mfcr2_metering_pulse_timeout=-1
>> mfcr2_allow_collect_calls=yes
>> mfcr2_charge_calls=yes
>> mfcr2_mfback_timeout=-1
>> channel => 1-15
>>
>> group=0
>>
>> mfcr2_dtmf_detection=1
>> mfcr2_dtmf_dialing=1
>> channel => 17-31
>>
>> Ahora se me da un caso muy extraño, con este esquema las llamadas
>> entrantes funcionan sin problemas, pero no las salientes, ahora cuando
>> comento la linea channel => 1-15, las llamadas salientes se efectúan
>> sin ningún problema, pero con la linea comentada no puedo hacer
>> llamadas entrantes.
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> --
> Saludos.
>
> Ing. Yuliesky Bello Chávez.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2



-- 
---------------------------------------------------------------------------------
Luis Morales
Consultor de Tecnologia
Cel: +58(0412)2352745
OpenID: http://lmorales.myopenid.com/
Twitter: @magnadata
Linux User ID : 470650
---------------------------------------------------------------------------------
"Empieza por hacer lo necesario, luego lo que es posible... y de
pronto estarás haciendo lo imposible"

Leonardo Da'Vinci
---------------------------------------------------------------------------------



More information about the asterisk-r2 mailing list