[asterisk-r2] OpenVox TE210P/TE212P dual-span T1/E1/J1 card 3.3V + E1 + openr2 + ETECSA(Cuba)

Sat Sep 3 15:55:49 CDT 2011

Hola rodolfo.

Yo haría las siguientes pruebas:

   1. Quitar crc4 en el system.conf
   2. Poner busydetect=no y comentar busycount=3 en el chan_dahdi.conf.
   3. Los parámetros maxani y maxdnis, colocarlos con la sintaxis de los
   demás parámetros, es decir mfcr2_max_ani=    y mfcr2_max_dnis=.  Además,
   creo qeu el valor de maxdnis en 4,  sólo te permite llamar a números de 4
   dígitos.

Otras cosa que se debe tener en cuenta es quién genera el timing.

On Fri, Sep 2, 2011 at 12:37 PM, r0d0 <rodolfo at dic.ohc.cu> wrote:

> hola a todos, necesito ayuda, mi escenario es este..
>
> OpenVox-Communication controller: Digium, Inc. Wildcard TE210P/TE212P
> dual-span T1/E1/J1 card 3.3V (rev 02)
> Elastix-2.0.3-i386
> Asterisk 1.6.2.13
> DAHDI Version: 2.3.0.1 Echo Canceller: OSLEC
> libopenr2-1.3.0-0
>
> hola a todos necesito saber si mi enlace E1+R2 está levantado, pruebo
> con el r2test pero no logra ejecutar una llamada de prueba para saber si
> hay tráfico en el canal y el enlace está bien configurado,  me guié para
> la configuración por openr2-guide-0.3.pdf escrita por el Sr. Moises
> Silva y sigo sin poder ejecutar una llamada con el r2test, aquí dejo la
> config de mi servidor, el debug del r2test y otro poco de información
> para ver si alguien puede ayudarme..
> gracias de antemano
>
>
> ****************************************
>
> mainpbx*CLI> dahdi show status
> Description                              Alarms  IRQ    bpviol CRC4
> Fra Codi Options  LBO
> T2XXP (PCI) Card 0 Span 1                OK      0      0      0
> CAS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
> T2XXP (PCI) Card 0 Span 2                UNCONFI 0      0      0
> CAS Unk           0 db (CSU)/0-133 feet (DSX-1)
>
>
>
> *******************************************
>
>
> [root at mainpbx openr2]# r2test -c r2test.conf
> found category = NATIONAL_SUBSCRIBER
> found Log Level = all
> found option callfiles=no
> found R2 variant = itu
> found MAX ANI= 10
> found MAX DNIS= 4
> found option Get ANI First = yes
> found option Use DAHDI MF = no
> found option MF threshold = 0
> found option MF backward timeout = -1
> found option meteringpulsetimeout=-1
> found option collectcalls=no
> found option chargecalls=yes
> found option doubleanswer=no
> found option immediateaccept=no
> found option skipcategory=no
> found channel range = 1-1
> found DNID = 052789779
> found CID = 7714
> Spawned 1 listener threads, waiting for them to be ready ...
> channel 1, variant = ITU
> [08:26:894][CAS TRACE] Channel 1 -- CAS Tx >> [IDLE] 0x08
> [08:26:894][CAS TRACE] Channel 1 -- CAS Raw Tx >> 0x09
> [08:26:894][DEBUG] Channel 1 -- Bits changed from 0x00 to 0x08
> [08:26:894][CAS TRACE] Channel 1 -- CAS Rx << [IDLE] 0x08
> USER: far end unblocked on chan 1
> Spawned 0 calling threads, waiting for all threads ...
> [11:03:946][DEBUG] Channel 1 -- Bits changed from 0x08 to 0x00
> [11:03:946][CAS TRACE] Channel 1 -- CAS Rx << [SEIZE] 0x00
> [11:03:946][DEBUG] Channel 1 -- Initialized R2 MF detector
> [11:03:946][CAS TRACE] Channel 1 -- CAS Tx >> [SEIZE ACK] 0x0C
> [11:03:946][CAS TRACE] Channel 1 -- CAS Raw Tx >> 0x0D
> USER: new call detected on chan 1
>
>
>
> *****************************************************
> system.conf
>
> span=1,1,0,cas,hdb3,crc4
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
> echocanceller=oslec,1-15,17-31
> loadzone = us
> defaultzone=us
>
>
> *****************************************************
> chan_dahdi.conf
>
>
> [trunkgroups]
>
> [channels]
> context=from-pstn
> signalling=mfcr2
> rxwink=300              ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> maxani=7
> maxdnis=4
> mfcr2_variant=itu
> mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> ;call logging parameters
> mfcr2_logdir=/etc/asterisk/span1
> mfcr2_call_files=yes
> mfcr2_logging=all
>
> ;Uncomment these lines if you have problems with the disconection of
> your analog lines
> busydetect=yes
> busycount=3
>
>
> immediate=no
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2

-- 
Juan Pablo Villarreal
Ingeniero Electrónico
email: jvillarreal at opengroupsa.com
*Santiago de Cali
Colombia
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20110903/af042b07/attachment.htm>