[asterisk-r2] How to customize the R2 protocol using r2proto.conf ?

[Victor Villarreal]

Hi Moises, hi all there.

We've a PBX (Asterisk 1.4.38 + DAHDI 2.4.1.2 + openr2 1.3.0) and need
to connect to a CAS, HDB3, no CRC4 MFC/R2 line. Using the setting
attached, we can make calls but not receive. The carrier (Iplan) say
thar they use 'ar' variation and we too. But the inbound calls not
work.

If we connect this PBX with the same setting to another MFC/R2 'ar'
line of another carrier (Telmex), works like a charm.

I think that if I can customize the protocol, maybe work. Any Sugestion ?

Thanks in advance and best regards.

COS-inbound.log
http://pastebin.com/hLgdU0tP

COS-outbound.log
http://pastebin.com/nnpnxh3c

COS-chan_dahdi.conf
http://pastebin.com/2LftVP4i

chan-1-forward-2-2011060818091...
http://pastebin.com/MidRMHx6

chan-2-backward-0-201106071801...
http://pastebin.com/bSYAH7u0

-- 
GnuPG Key ID: 0xD1233DCC
http://www.mefhigoseth.com.ar
...:::[ God Rulz ! ]:::...