[asterisk-r2] MFCR2 - CAS Seize or 0x00 when apply changes on freepbx .

[Juan Carlos Huerta]

Gerardo and Moises are right, try to use a standard version. :)

2011/8/30, Gerardo Barajas <gerardo.barajas at gmail.com>:
> Haven't seen that Issue.
> Perhaps you can try with another distro such as Elastix, or Trixbox.
>
>
>
> On Tue, Aug 30, 2011 at 12:14 PM, Marcio Oliveira <bymarcrj at gmail.com>wrote:
>
>>    Hi , thanks for your response .
>>
>>    Asterisk version i'm using is 1.6.2.20 and openr2 1.2 .
>>
>>    So , is there an way to update openr2 ? any special procedure ?
>>
>>     Thank you !
>> 2011/8/30 Moises Silva <moises.silva at gmail.com>
>>
>>> My advice would be upgrade openr2 and asterisk to 1.6.2 (not sure what
>>> asterisknow 1.7 is), this may be already fixed. This kind of problems
>>> are very hard to troubleshoot.
>>>
>>> On Tue, Aug 30, 2011 at 10:40 AM, Marcio Oliveira <bymarcrj at gmail.com>
>>> wrote:
>>> >
>>> >   Hi ,
>>> >
>>> >   I have a system up and running , integrated with legacy PBX Nec Neax
>>> 2000
>>> > . I'm using asterisknow 1.7 , a digium card TE407P ( E1 ) and openr2
>>> > 1.2
>>> (
>>> > native from asterisknow ) in Brazil .
>>> >
>>> >   The only issue i have is :
>>> >
>>> >    - When i apply changes on freepbx ( create an extensios ) and reload
>>> it
>>> > ,my channels get Seize and the only way to back this to the normal
>>> > state
>>> ,
>>> > Idle , is restart asterisk ( tx channels get back to Idle but RX are
>>> 0x00 )
>>> > and then disconnect the cable from balun and connect again . After do
>>> this
>>> > all channels get back to idle state and i'm able to make and receive
>>> calls .
>>> >
>>> >   So , do you have an idea about how to fix this ?.
>>> >
>>> >    Thanks in advance !
>>> >
>>> >      Marcio .
>>> >
>>> > --
>>> > _____________________________________________________________________
>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> >
>>> > asterisk-r2 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>

-- 
Enviado desde mi dispositivo móvil

Juan Carlos
~ Lo que no te mata te fortalece ~