[asterisk-r2] ANI=1111.. and DNIS=1111.. when receive calls

[Phi Phu]

Hi all,
 
I am using Digium te112, dahdi and openr2 1.3.0, on ubuntu 9.10. The card and the dahdi seem to be installed correctly with "active=yes" and "alarm=OK" in output of "dahdi_scan" command. I am in Vietnam, and below are lines in my "r2test.conf" file :
variant=itu
maxani=10
maxdnis=7
other lines are kept with default values.
 
I am runing r2test to debug incomming call, and i am now having two problems:
1) ANI value is alway "1111111111", and DNIS value is alway "1111111"
2) Far end is disconnected right after r2test accepts the incomming calls.
 
[23:09:094][DEBUG] Channel 1 -- M -- calling timer 12 (r2_answer_delay) callback
USER: call has been accepted on chan 1 with type: *UNKNOWN*
[23:09:094][CAS TRACE] Channel 1 -- M -- CAS Tx >> [ANSWER] 0x04
[23:09:094][CAS TRACE] Channel 1 -- M -- CAS Raw Tx >> 0x05
USER: no file opened yet, let's open it...
[23:09:129][DEBUG] Channel 1 -- M -- Bits changed from 0x00 to 0x08
[23:09:129][CAS TRACE] Channel 1 -- M -- CAS Rx << [CLEAR FORWARD] 0x08
[23:09:129][NOTICE] Channel 1 -- M -- Far end disconnected. Reason: Normal Clearing
USER: got disconnect on chan 1: Normal Clearing

Please help
Thank you.


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100511/1cd3f621/attachment.htm