[asterisk-r2] FW: FW: te122p con E1 telecom conmutado

Fri Mar 5 12:08:17 CST 2010

y cuando trato de marcar por el canal me sale:

voip*CLI>
    -- Executing [95101652 at L-DDN-DDI-CEL:1] Dial("SIP/100-c4003530", "Unicall/g1/5101652") in new stack
[Mar  5 13:07:17] WARNING[4661]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Unicall' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [95101652 at L-DDN-DDI-CEL:2] Hangup("SIP/100-c4003530", "") in new stack
  == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c4003530'
voip*CLI>

Op

From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Date: Fri, 5 Mar 2010 13:06:11 -0500
Subject: [asterisk-r2] FW: te122p con E1 telecom conmutado

Hola

Bueno les cuento que en el balun conecte al contrario el rx y el tx y la tarjeta se coloco en verde...

ahora me salen:

[Mar  5 13:03:08] ERROR[4529]: chan_unicall.c:2522 handle_uc_event: Unicall/28 protocol error. Cause 32773
MFC/R2 UniCall/29      <- 0100  [1/BLOCKED /Idle          /Idle         ]
MFC/R2 UniCall/29 R2 prot. err. [1/BLOCKED /Idle          /Idle         ] cause 32773 - Unexpected CAS bit pattern
MFC/R2 UniCall/29 1001  ->      [1/BLOCKED /Idle          /Idle         ]

que significa esto???

gracias

Omar

From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 12:27:06 -0500

Mi configuracion

From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 11:47:55 -0500

Pues le cuento:
El canal esta actualmente conectado a una planta Alcatel OmniPCX y esta funcionando
el cable UTP sale del balun y entra al puerto de la Alcatel donde dice PBX
ese mismo cable es el que uso para conectar a mi tarjeta
Mi configuracion es:

zaptel.conf

# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1101
#dchan=16
cas=17-31:1101
# Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
fxsks=32
fxsks=33
fxsks=34
fxsks=35
# Global data
loadzone        = us
defaultzone     = us

unicall.conf

[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
protocolclass=mfcr2
; protocolvariant=co-land,30,1,16
protocolvariant=co-land,30,7,16
protocolend=cpe
group = 1
loglevel = 255
context= from-pstn
channel => 1-15
channel => 17-31
;skip time slot 16

extensions.conf

[from-pstn]
exten=>_.,1,Answer()
exten=>_.,n,Goto(ivr,s,1)
exten=>_.,n,Hangup

exten=>9260,1,Answer()
exten=>9260,n,Goto(ivr,s,1)
exten=>9260,n,Hangup

Tengo entendido q en el zapata.conf no se coloca nada del E1 pero aca les mando:

[trunkgroups]
[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
faxdetect=incoming
busydetect=yes
busycount=4

; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
;group=1
;context=from-pstn
;switchtype = euroisdn
;signalling = pri_cpe
;channel => 1-31
; Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
;;; line="32 WCTDM/0/0 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 32
;;; line="33 WCTDM/0/1 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 33
;;; line="34 WCTDM/0/2 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 34
;;; line="35 WCTDM/0/3 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 35

gracias

Op 

Discover the new Windows Vista Learn more! 

Explore the seven wonders of the world Learn more! 

Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it! 		 	   		  
_________________________________________________________________
Connect to the next generation of MSN Messenger 
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100305/d4b87aa8/attachment.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT00001
Url: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100305/d4b87aa8/attachment.txt 