[asterisk-r2] R2 Problem

Claudio Tajtelbaum ctaity at gmail.com
Wed Jun 30 15:39:40 CDT 2010


gracias a todos, pero ya solucione el problema, el problema estaba del lado
de la harris, es una central que es un dinosaurio, y pudimos conseguir un
experto, era uno de los parametros de la trama configurada en la harries,
ellos debian desbloquear los canales con un comando

On Wed, Jun 30, 2010 at 5:09 PM, francisco flores <turuwhiska at hotmail.com>wrote:

>
> esa central es de argentina no?
>
> proba poner el dahdi asi a ver si te libera los otros canales
>
> /etc/dadhi/system.conf
>
> span=1,1,0,cas,hdb3
> cas=1:0000
> cas=2-15:1101
> cas=17-31:1101
>
>
>
>
> ------------------------------
> Date: Wed, 30 Jun 2010 15:58:13 -0300
> From: ctaity at gmail.com
>
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] R2 Problem
>
>
> mfcr2 show channels: http://pastebin.com/8vgcSZ6m
>
> On Tue, Jun 29, 2010 at 6:24 PM, Moises Silva <moises.silva at gmail.com>wrote:
>
> I saw this in the asterisk-r2 mailing list. Please keep the conversation
> there.
>
> Pastebin the output of mfcr2 show channels.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
>
> On Tue, Jun 29, 2010 at 2:40 PM, Claudio Tajtelbaum <ctaity at gmail.com>wrote:
>
> You are mi last option, please help meeeee.
>
> Hi, i need to connect asterisk with a Harries 20-20 Semi Public PBX with
> mcf/r2 protocol.
> Mi hardware is Sangoma A101. Elastix 1.6 Realease. 1.2 libopenr2.
> The configuration of dahdi is
> /etc/dadhi/system.conf
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> #i test with and without this parmeter with same result.
> dchan=16
>
> /etc/asterisk/chan_dahdi.conf
>
> [channels]
> language=es
> signalling=mfcr2
> group=0
> mfcr2_variant=ar
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_logging=all
> channel=1-15
> channel=17-31
>
>
> My problem is, in all channels after init i got the message
>
> Far end blocked on chan XXXX
>
> The provider of the harries 20-20 tell me the variant use is AR.
> I use E1 crosscable to connect this pbx.
> No alarms, the status is Green ( ok).
>
> The configuration of the harries 20-20 is
>
>
>
> li 3-3
>
> SLOT 03-03/32 PORTS: 2MB
>                                      TONE  ADJUST
> CIRC               NAME              PLAN  TR/RE   COMMENT
> ----  ----         ----              ----  ------  -------
>
>  1/R2DGTL TG 35    CEL               D/TT   0/0
>  2/R2DGTL TG 35    CEL               D/TT   0/0
>  3/R2DGTL TG 35    CEL               D/TT   0/0
>  4/R2DGTL TG 35    CEL               D/TT   0/0
>  5/R2DGTL TG 35    CEL               D/TT   0/0
>  6/R2DGTL TG 35    CEL               D/TT   0/0
>  7/R2DGTL TG 35    CEL               D/TT   0/0
>  8/R2DGTL TG 35    CEL               D/TT   0/0
>  9/R2DGTL          ----------        D/TT   0/0
> 10/R2DGTL          ----------        D/TT   0/0
> 11/R2DGTL          ----------        D/TT   0/0
> 12/R2DGTL          ----------        D/TT   0/0
> 13/R2DGTL          ----------        D/TT   0/0
> 14/R2DGTL          ----------        D/TT   0/0
> 15/R2DGTL          ----------        D/TT   0/0
> 16/IMD CTRL        ----------        -----  0/0
> 17/R2DGTL          ----------        D/TT   0/0
> 18/R2DGTL          ----------        D/TT   0/0
> 19/R2DGTL          ----------        D/TT   0/0
> 20/R2DGTL          ----------        D/TT   0/0
> 21/R2DGTL          ----------        D/TT   0/0
> 22/R2DGTL          ----------        D/TT   0/0
> 23/R2DGTL          ----------        D/TT   0/0
> 24/R2DGTL          ----------        D/TT   0/0
> 25/R2DGTL          ----------        D/TT   0/0
> 26/R2DGTL          ----------        D/TT   0/0
> 27/R2DGTL          ----------        D/TT   0/0
> 28/R2DGTL          ----------        D/TT   0/0
> 29/R2DGTL          ----------        D/TT   0/0
> 30/R2DGTL          ----------        D/TT   0/0
> 31/R2DGTL          ----------        D/TT   0/0
> 32/2MB CTRL        ----------        -----  0/0
>
> Frame alignment signal error ................ 10 EXP-4
> Receive frame slip counter limit ............ 254
> Prompt maintenance prealarm counter limit ... 254
> Remote prealarm counter limit ............... 254
> Out of service prealarm counter limit ....... 254
> Prompt maintenance alarm on delay ........... 2.0 seconds
> Prompt maintenance alarm off delay .......... 2.0 seconds
> Remote alarm on delay ....................... 0.3 seconds
> Remote alarm off delay ...................... 0.3 seconds
> Signaling type .............................. STANDARD
> Channel 16 mode ............................. CAS
>
> BOA ...? tru li 35
>
> ************************  W  A  R  N  I  N  G
> *******************************
>
> Within this module, all ADDs, all DELetes, and some MODifys cannot be SAVed
> unless the switch is REBooted.  You will be alerted when a MODify which
> requires a REBoot to SAVe is encountered and you will have the option to
> cancel it.
>
>
> ******************************************************************************
>
> Trunk group number ............ 35
> Trunk group type .............. R2DGTL
> Incoming class of service ..... 206     R2
> Trunk ID digits ............... NONE
> No answer extension ........... NONE
> Call flow ..................... BOTH
> Incoming dialing mode ......... MFC
> Incoming lookahead signaling .. NO
> Outgoing dialing mode ......... MFC
> Meter pulse ................... Yes
> Bit used for meter pulses ..... A-BIT
> Search type ................... CIRCULAR FORWARD
> Malicious call line signal .... No
> Forced release line signal .... Yes
> Double seizure allowed ........ Yes
> Circuit locations ............. 03-03-01   03-03-02   03-03-03   03-03-04
> Circuit locations ............. 03-03-05   03-03-06   03-03-07   03-03-08
> Unassigned circuit locations .. 22
> AW display name ............... CEL
> Teleset display name .......... CEL
> Comment ... GT-35 e1 salida celulares
>
> TRU ...? sys
>
> SYSEDT ...? r2
>
> SYSR2 ...? li
>
> Parameter [ALL] ...?
>
> Group A Function          Signal
> ----------------          ------
> SND                       A1
> EOS                       A3
> SND-1                     A2
> SND-2                     A7
> SND-3                     A8
> RESTART                   A10
> SND-CAT                   A5
> CONGESTION                A4
> SPEECH                    A6
> SND-CATC                  N/A
> UNALLOC                   A4
> SND-NAT                   N/A
> RESTRICT                  N/A
> SND-N                     A9
>
> Group B Status            Signal
> --------------            ------
> IDLE                      B6
> BUSY                      B3
> NOCHARGE                  B7
> MCT                       B1
> UNALLOC                   B5
> CONGESTION                B4
> SND-TONE                  B2
> OUT-SERV                  B8
> NUM-CHG                   B2
> FAULTY                    B8
> UNAVAIL                   B5
>
> Group C Function          Signal
> ----------------          ------
> SND-ANIC                  N/A
> RESTARTC                  N/A
> EOAC                      N/A
> CONGESTION                N/A
> SNDC                      N/A
> SLDC                      N/A
>
> Group II Category         Signal
> -----------------         ------
> SUB-PRIORITY              II2
> SUB-NO-PRIORITY           II1
> MAINT-EQUIP               II3
> OPERATOR                  II1
> DATA-EQUIP                II6
> SUB-NO-IDENTIFY           II1
>
> ANI SOURCE: Auth code field
>
> R2 Protocol Parameters
> ------------------------------------------------------------------
> Send ANI after Sending Category of SUB-NO-IDENTIFY...............Y
> Send I-12 if ANI is requested, but no ANI is available...........Y
> Release trunk after receiving undefined Group A signals..........Y
> Send congestion tone after receiving undefined Group B signals...N
> Treat R2 B1 signal as Idle  .....................................Y
> Send I-12 when restarting ANI digits.............................Y
>
>
>
> SYSR2 ...?
>
>
>
>
>
>
>
>
>
>
> ------------------------------
> Acceder a tu casilla ahora es mucho más rápido. Ahora Hotmail es un 70% más
> veloz. Conocé más <http://www.descubrehotmail.com/velocidad.asp>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100630/3eba0a0c/attachment.htm 


More information about the asterisk-r2 mailing list