[asterisk-r2] Call got disconnected after 20-30 seconds

[Rayan (m0wKz) Pepito]

Hi all,

I have successfully configured Asterisk with E1/R2 line.
I used TE121b card.  It's working perfectly almost a year.
But just recently, every time there's an incoming call the call got disconnected after 20-30 seconds.
I check my logs and here are the messages:

[Jan 22 10:55:47] NOTICE[5800] chan_dahdi.c: New MFC/R2 call detected on chan 1.
[Jan 22 10:55:50] NOTICE[5800] chan_dahdi.c: MFC/R2 call offered on chan 1. ANI = 0325114467, DNIS = 9400, Category = National Subscriber
[Jan 22 10:55:50] NOTICE[5800] chan_dahdi.c: MFC/R2 call has been accepted on chan 1
[Jan 22 10:55:50] WARNING[10160] chan_sip.c: SIPPEER(): usage of ':' to separate arguments is deprecated.  Please use ',' instead.
[Jan 22 10:55:59] NOTICE[10160] chan_dahdi.c: MFC/R2 call end on chan 1

I suspected it's a telco issue.
Did someone experience this same scenario?

Please help.Thank you.
mowkz

 *************************************************************************
Rayan G. Pepito
Junior Research and Development Engineer
Alliance Outsourcing and Software Development, Inc.
E-Mail  : rpepito at asi-dev1.com
: ryn_pp2 at yahoo.com
URL     : www.alliance.com.ph


"Life is not how to survive the storm but how to dance in the rain.:D"
*************************************************************************



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100124/5e8c9dbd/attachment.htm