[asterisk-r2] doubt about how to handle calls with openr2

[Moises Silva]

2010/4/13 Juan Manuel Rafael Suárez <jrafael at telsyssolution.com>

>
> For example. In one server I see tx OK,,.. and on the other side, where I
> receive call is too low, for example from 900 to 1100 ,, I thinks that is
> the problem to receive DNIs and ANIS.
>
>
>
> Do you have some recommendation to solve this issue, I tested RX gain and
> Tx gain on both servers, but the issue still there..
>
>
>
> Stop using crappy hardware and use something better? ie Sangoma card? :-)

Definitely, this should be taken with your manufacturer support, there is
nothing that I can think of that can be done at the openr2 level.

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com







> Thanks for the help
>
>
>
> JM
>
>
>
>
>
>
>
>
>
>
>
> * *
>
> *Juan Manuel Rafael Suárez** – **Director Comercial*
>
> *www.telsyssolution.com* <http://www.telsyssolution.com>*  |  **
> jrafael at telsyssolution.com** | ** t *(81) 8881-0101 ext 444*| ** c  *044
> 8110801650
>
>
>
>
>
>
>
> [image: cid:image002.jpg at 01C92397.57F83D10]
>
>
>
> *Business Continuity with Intelligent communication***
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100413/7a82bbe1/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3608 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-r2/attachments/20100413/7a82bbe1/attachment-0001.jpeg