[asterisk-r2] doubt about how to handle calls with openr2

Mon Apr 12 12:48:13 CDT 2010

Here the log

Originating :

[Apr 12 12:40:17] VERBOSE[3013] logger.c:   == Using SIP RTP TOS bits 184

[Apr 12 12:40:17] VERBOSE[3013] logger.c:   == Using SIP RTP CoS mark 5

[Apr 12 12:40:17] VERBOSE[3013] logger.c:   == Using SIP VRTP TOS bits 136

[Apr 12 12:40:17] VERBOSE[3013] logger.c:   == Using SIP VRTP CoS mark 6

[Apr 12 12:40:17] VERBOSE[5381] logger.c:     -- Executing [1 at from-internal:1] Dial("SIP/100-09ba2930", "DAHDI/g0/1") in new stack

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: No MFC/R2 category specified for chan DAHDI/1-1, using default National Subscriber

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: Chan 1 - Requested to make call (ANI=100, DNIS=1, category=National Subscriber)

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: Chan 1 - Call started at Mon Apr 12 12:40:17 2010 on chan 1 [openr2 version 1.3.0, revision (release)]

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: Chan 1 - Outgoing call proceeding: ANI=100, DNIS=1, Category=National Subscriber

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE] 0x00

[Apr 12 12:40:17] DEBUG[5381] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x01

[Apr 12 12:40:17] VERBOSE[5381] logger.c:     -- Called g0/1

[Apr 12 12:40:17] DEBUG[4290] chan_dahdi.c: Chan 1 - Bits changed from 0x08 to 0x0C

[Apr 12 12:40:17] DEBUG[4290] chan_dahdi.c: Chan 1 - CAS Rx << [SEIZE ACK] 0x0C

[Apr 12 12:40:17] DEBUG[4290] chan_dahdi.c: Chan 1 - MFC/R2 call acknowledge!

[Apr 12 12:40:17] DEBUG[4290] chan_dahdi.c: Chan 1 - Sending DNIS digit 1

[Apr 12 12:40:17] DEBUG[4290] chan_dahdi.c: Chan 1 - MF Tx >> 1 [ON]

---------Here I hang up the call cause no answer

[Apr 12 12:40:41] DEBUG[5381] chan_dahdi.c: disconnecting MFC/R2 call on chan 1

[Apr 12 12:40:41] DEBUG[5381] chan_dahdi.c: Chan 1 - CAS Tx >> [CLEAR FORWARD] 0x08

[Apr 12 12:40:41] DEBUG[5381] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Hungup 'DAHDI/1-1'

[Apr 12 12:40:41] VERBOSE[5381] logger.c:   == Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/100-09ba2930'

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [h at from-internal:1] Macro("SIP/100-09ba2930", "hangupcall") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:1] ResetCDR("SIP/100-09ba2930", "vw") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:2] NoCDR("SIP/100-09ba2930", "") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:3] GotoIf("SIP/100-09ba2930", "1?skiprg") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Goto (macro-hangupcall,s,6)

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:6] GotoIf("SIP/100-09ba2930", "1?skipblkvm") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Goto (macro-hangupcall,s,9)

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:9] GotoIf("SIP/100-09ba2930", "1?theend") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Goto (macro-hangupcall,s,11)

[Apr 12 12:40:41] VERBOSE[5381] logger.c:     -- Executing [s at macro-hangupcall:11] Hangup("SIP/100-09ba2930", "") in new stack

[Apr 12 12:40:41] VERBOSE[5381] logger.c:   == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/100-09ba2930' in macro 'hangupcall'

[Apr 12 12:40:41] VERBOSE[5381] logger.c:   == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/100-09ba2930'

[Apr 12 12:40:41] DEBUG[4290] chan_dahdi.c: Chan 1 - Bits changed from 0x0C to 0x08

[Apr 12 12:40:41] DEBUG[4290] chan_dahdi.c: Chan 1 - CAS Rx << [IDLE] 0x08

[Apr 12 12:40:41] DEBUG[4290] chan_dahdi.c: Chan 1 - Call ended

[Apr 12 12:40:41] DEBUG[4290] chan_dahdi.c: Chan 1 - CAS Tx >> [IDLE] 0x08

[Apr 12 12:40:41] DEBUG[4290] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09

[Apr 12 12:40:41] NOTICE[4290] chan_dahdi.c: MFC/R2 call end on chan 1

Inside mfcr2/span1 debug (receiving side)

[12:37:59:129] [Thread: 84269968] [Chan 1] - Call started at Mon Apr 12 12:37:59 2010 on chan 1 [openr2 version 1.3.0, revision (release)]

[12:37:59:129] [Thread: 84269968] [Chan 1] - Outgoing call proceeding: ANI=100, DNIS=1, Category=National Subscriber

[12:37:59:129] [Thread: 84269968] [Chan 1] - CAS Tx >> [SEIZE] 0x00

[12:37:59:129] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x01

[12:37:59:129] [Thread: 84269968] [Chan 1] - scheduled timer id 2 (r2_seize)

[12:37:59:135] [Thread: 84269968] [Chan 1] - Bits changed from 0x08 to 0x0C

[12:37:59:135] [Thread: 84269968] [Chan 1] - CAS Rx << [SEIZE ACK] 0x0C

[12:37:59:135] [Thread: 84269968] [Chan 1] - Attempting to cancel timer timer 2

[12:37:59:135] [Thread: 84269968] [Chan 1] - timer id 2 found, cancelling it now

[12:37:59:135] [Thread: 84269968] [Chan 1] - MFC/R2 call acknowledge!

[12:37:59:135] [Thread: 84269968] [Chan 1] - Sending DNIS digit 1

[12:37:59:135] [Thread: 84269968] [Chan 1] - MF Tx >> 1 [ON]

[12:38:24:546] [Thread: 84269968] [Chan 1] - Attempting to cancel timer timer 0

[12:38:24:546] [Thread: 84269968] [Chan 1] - Cannot cancel timer 0

[12:38:24:546] [Thread: 84269968] [Chan 1] - CAS Tx >> [CLEAR FORWARD] 0x08

[12:38:24:546] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x09

[12:38:24:554] [Thread: 4995984] [Chan 1] - Bits changed from 0x0C to 0x08

[12:38:24:554] [Thread: 4995984] [Chan 1] - CAS Rx << [IDLE] 0x08

[12:38:24:554] [Thread: 4995984] [Chan 1] - Call ended

[12:38:24:554] [Thread: 4995984] [Chan 1] - Attempting to cancel timer timer 0

[12:38:24:554] [Thread: 4995984] [Chan 1] - Cannot cancel timer 0

Receving asterisk

[Apr 12 12:40:17] NOTICE[17076] chan_dahdi.c: New MFC/R2 call detected on chan 1.

---- Here the call was cancelled.

[Apr 12 12:40:41] NOTICE[17076] chan_dahdi.c: MFC/R2 call disconnected on chan 1

[Apr 12 12:40:41] NOTICE[17076] chan_dahdi.c: MFC/R2 call end on chan 1

Inside mfcr2/span1 debug (receiving side)

[12:37:59:136] [Thread: 3085118352] [Chan 1] - Call started at Mon Apr 12 12:37:59 2010 on chan 1 [openr2 version 1.3.0, revision (release)]

[12:37:59:136] [Thread: 3085118352] [Chan 1] - Initialized R2 MF detector

[12:37:59:136] [Thread: 3085118352] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C

[12:37:59:136] [Thread: 3085118352] [Chan 1] - CAS Raw Tx >> 0x0D

[12:38:24:552] [Thread: 3085118352] [Chan 1] - Bits changed from 0x00 to 0x08

[12:38:24:552] [Thread: 3085118352] [Chan 1] - CAS Rx << [CLEAR FORWARD] 0x08

[12:38:24:552] [Thread: 3085118352] [Chan 1] - Far end disconnected. Reason: Normal Clearing

[12:38:24:552] [Thread: 3085118352] [Chan 1] - Call ended

[12:38:24:552] [Thread: 3085118352] [Chan 1] - Attempting to cancel timer timer 0

[12:38:24:552] [Thread: 3085118352] [Chan 1] - Cannot cancel timer 0

Is it ok with debug??

JM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100412/fad4b492/attachment-0001.htm 