[asterisk-r2] doubt about how to handle calls with openr2

Juan Manuel Rafael Suárez jrafael at telsyssolution.com
Mon Apr 12 12:29:49 CDT 2010


Trixbox 2.8  asterisk 1.6 (over centos)

Kernel 2.6.18-128.1.10.el5xen

 

Card is an openvox DE115E   

Pci exprés echo cancelation.

 

 

I am working on there in this momento, so any sugestion will be tested…

 

 

Thanks for your help

 

JM

 

 

 

 

 

Juan Manuel Rafael Suárez – Director Comercial

 <http://www.telsyssolution.com> www.telsyssolution.com  |   <mailto:jrafael at telsyssolution.com> jrafael at telsyssolution.com |  t (81) 8881-0101 ext 444|  c  044 8110801650

 

 

 

cid:image002.jpg at 01C92397.57F83D10 

 

Business Continuity with Intelligent communication

 

 

De: Moises Silva [mailto:moises.silva at gmail.com] 
Enviado el: Lunes, 12 de Abril de 2010 12:27 p.m.
Para: asterisk-r2 at lists.digium.com
CC: jrafael at telsyssolution.com
Asunto: Re: [asterisk-r2] doubt about how to handle calls with openr2

 

Which card and operating system are you using?

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com



2010/4/12 Juan Manuel Rafael Suárez <jrafael at telsyssolution.com>

Here we have some logs...


First the sending call asterisk

[12:06:15:938] [Thread: 84269968] [Chan 1] - Call started at Mon Apr 12
12:06:15 2010 on chan 1 [openr2 version 1.3.0, revision (release)]
[12:06:15:938] [Thread: 84269968] [Chan 1] - Outgoing call proceeding:
ANI=100, DNIS=1, Category=National Subscriber
[12:06:15:938] [Thread: 84269968] [Chan 1] - CAS Tx >> [SEIZE] 0x00
[12:06:15:938] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x01
[12:06:15:938] [Thread: 84269968] [Chan 1] - scheduled timer id 2 (r2_seize)
[12:06:15:944] [Thread: 84269968] [Chan 1] - Bits changed from 0x08 to 0x0C
[12:06:15:944] [Thread: 84269968] [Chan 1] - CAS Rx << [SEIZE ACK] 0x0C
[12:06:15:944] [Thread: 84269968] [Chan 1] - Attempting to cancel timer
timer 2
[12:06:15:944] [Thread: 84269968] [Chan 1] - timer id 2 found, cancelling it
now
[12:06:15:944] [Thread: 84269968] [Chan 1] - MFC/R2 call acknowledge!
[12:06:15:944] [Thread: 84269968] [Chan 1] - Sending DNIS digit 1
[12:06:15:944] [Thread: 84269968] [Chan 1] - MF Tx >> 1 [ON]
[12:06:29:385] [Thread: 84269968] [Chan 1] - Attempting to cancel timer
timer 0
[12:06:29:385] [Thread: 84269968] [Chan 1] - Cannot cancel timer 0
[12:06:29:385] [Thread: 84269968] [Chan 1] - CAS Tx >> [CLEAR FORWARD] 0x08
[12:06:29:385] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x09
[12:06:29:402] [Thread: 3996560] [Chan 1] - Bits changed from 0x0C to 0x08
[12:06:29:402] [Thread: 3996560] [Chan 1] - CAS Rx << [IDLE] 0x08
[12:06:29:402] [Thread: 3996560] [Chan 1] - Call ended
[12:06:29:402] [Thread: 3996560] [Chan 1] - Attempting to cancel timer timer
0
[12:06:29:402] [Thread: 3996560] [Chan 1] - Cannot cancel timer 0




Then the asterisk that receive the call on mfcR2

[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Bits changed from 0x08
to 0x00
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Rx << [SEIZE] 0x00
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Call started at Mon
Apr 12 12:06:15 2010 on chan 1 [openr2 version 1.3.0, revision (release)]
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Initialized R2 MF
detector
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE ACK]
0x0C
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x0D
[Apr 12 12:06:15] NOTICE[14965] chan_dahdi.c: New MFC/R2 call detected on
chan 1.
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - Bits changed from 0x00
to 0x08
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Rx << [CLEAR
FORWARD] 0x08
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: Chan 1 - Far end disconnected.
Reason: Normal Clearing
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: MFC/R2 call disconnected on
chan 1
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - Call ended
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Tx >> [IDLE] 0x08
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: MFC/R2 call end on chan 1



Here we can see the digit 1 is sent and then it stops, no more anction until
hang up call.





Juan Manuel Rafael Suárez – Director Comercial
www.telsyssolution.com  |  jrafael at telsyssolution.com |  t (81) 8881-0101
ext 444|  c  044 8110801650



 

Business Continuity with Intelligent communication


-----Mensaje original-----
De: asterisk-r2-bounces at lists.digium.com
[mailto:asterisk-r2-bounces at lists.digium.com] En nombre de
jrafael at telsyssolution.com
Enviado el: Lunes, 12 de Abril de 2010 09:40 a.m.
Para: asterisk-r2 at lists.digium.com
Asunto: Re: [asterisk-r2] doubt about how to handle calls with openr2

Hellos thanks for reply, actually it is mexico variant.

The other side is another trixbox 2.8 with openr2 installed and running.

When i change sides, i could send call with just one dnig digit.

But not audio.

And i saw answer detected before accepted in logs.

A couple of configuuration changes and i can not complete calls anymore.

any comments?, thanks for the news contact us is not working i ll check it.

Jm
Enviado desde mi oficina móvil BlackBerry® de Telcel

-----Original Message-----
From: Moises Silva <moises.silva at gmail.com>
Date: Mon, 12 Apr 2010 10:11:38
To: <asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] doubt about how to handle calls with openr2

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-r2
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-r2


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-r2

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100412/d6e1b0bb/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3608 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-r2/attachments/20100412/d6e1b0bb/attachment-0001.jpeg 


More information about the asterisk-r2 mailing list