[asterisk-r2] R2 Argentina problem

[Mariano Sokal]

I guess you`ve seen this post already:
http://lists.digium.com/pipermail/asterisk-r2/2009-July/001080.html



-----Original Message-----
From: asterisk-r2-bounces at lists.digium.com [mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Sergio Galeotti
Sent: lunes, 09 de noviembre de 2009 01:32 p.m.
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] R2 Argentina problem

with the simplest chan_dahdi the result is the same:

│ Current Alarms: No alarms. │
│ Sync Source: T2XXP (PCI) Card 0 Span 1 │ │ IRQ Misses: 0 │ │ Bipolar Viol: 0 │ │ Tx/Rx Levels: 0/ 0 │ │ Total/Conf/Act: 31/ 31/ 30 │ │ 1111111111222222222233 ┌──────┐ │ │ 1234567890123456789012345678901 │ Back │ │ │ TxA 111111111111111-111111111111111 └──────┘ │ │ TxB 000000000000000-000000000000000 │ €â”€â”€â”€â”€â”€â”€â”¤ DAHDI Telephony Interfaces ├────│ TxC 000000000000000-000000000000000 │ │ │ TxD 111111111111111-111111111111111 │ │ │ OK ┌──────┐ │ ↑ │ │ RxA 111111111111111-111111111111111 │ Loop │ │ â–’–® │ │ RxB 000000000000000-000000000000000 └──────┘ │ â–’ 
│
│ RxC 000000000000000-000000000000000 │ â–’ │ │ RxD 111111111111111-111111111111111 │ â–®–’ │ │ │ â–’ │


Mariano Sokal wrote:
> Sergio, try with a simpler chan_dadhi first like this one:
>
> [channels]
> context=from-pstn
> language=es
> signalling=mfcr2
> group=0
> mfcr2_variant=ar
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_logging=all
> channel=1-15
> channel=17-31
>
> Then check what`s going on with dahdi_tool to see if you get an alarm 
> or the bits show something strange.
>
> Saludos,
> Mariano (recien hablamos)
>
> -----Original Message-----
> From: asterisk-r2-bounces at lists.digium.com
> [mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Sergio 
> Galeotti
> Sent: lunes, 09 de noviembre de 2009 01:04 p.m.
> To: asterisk-r2 at lists.digium.com
> Subject: [asterisk-r2] R2 Argentina problem
>
> I'm having this when I send a call to my Telefonica de Argentina R2 E1
>
> [root at pbxave span1]# vi chan-1-forward-5-20091109111818.call
>
> [11:18:18:619] [Thread: 1086220608] [Chan 1] - Call started at Mon Nov
> 9 11:18:18 2009 on chan 1 [openr2 version 1.2.0, revision exported] 
> [11:18:18:619] [Thread: 1086220608] [Chan 1] - CAS Tx >> [SEIZE] 0x00 
> [11:18:18:619] [Thread: 1086220608] [Chan 1] - CAS Raw Tx >> 0x01 
> [11:18:18:619] [Thread: 1086220608] [Chan 1] - scheduled timer id 2
> (r2_seize)
> [11:18:26:619] [Thread: 1086220608] [Chan 1] - Attempting to cancel 
> timer timer 2 [11:18:26:619] [Thread: 1086220608] [Chan 1] - timer id 
> 2 found, cancelling it now [11:18:26:619] [Thread: 1086220608] [Chan 
> 1] - calling timer 2
> (r2_seize) callback
> [11:18:26:619] [Thread: 1086220608] [Chan 1] - Seize Timeout Expired!
> [11:18:26:619] [Thread: 1086220608] [Chan 1] - Protocol error. Reason 
> = Seize Timeout, R2 State = Seize Transmitted, MF state = MF Engine 
> Off, MF Group = Forward MF init, CAS = 0x08 DNIS = 49823538, ANI = , 
> MF = 0x20 [11:18:26:619] [Thread: 1086220608] [Chan 1] - Attempting to 
> cancel timer timer 0 [11:18:26:619] [Thread: 1086220608] [Chan 1] - 
> Cannot cancel timer 0
>
> This is a new instalation, and apparently everything is OK.
>
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
>
>    1 AR      10      4        No        No               IDLE     IDLE
>
>    2 AR      10      4        No        No               IDLE     IDLE
>
>    3 AR      10      4        No        No               IDLE     IDLE
>
>    4 AR      10      4        No        No               IDLE     IDLE
>
>    5 AR      10      4        No        No               IDLE     IDLE
>
>    6 AR      10      4        No        No               IDLE     IDLE
>
>    7 AR      10      4        No        No               IDLE     IDLE
>
>
>
> ----------------------------------------
> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
> group=0,11
> context=from-pstn
> signaling = mfcr2
> mfcr2_variant=ar
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_call_files=yes
> mfcr2_logging=all
> mfcr2_mfback_timeout=200
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=no
> mfcr2_forced_release=no
> mfcr2_charge_calls=yes
>
> channel => 1-15,17-31
> context = default
>
>
>
> Please Help!!!!
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>