[asterisk-r2] CAS R2 - Mux Siemens

[Shazaum]

yo Douglas....

no difference and already used

 k3lconfig, you used to configure the signal?

another thing, you need to change the point of reference, as is a siemens
and not a modem, you need to disable the reference link

2009/3/31 Douglas Fischer <fischerdouglas at gmail.com>

> Hello,
>
> We are working on a project to a costumer with many sites, and connecting
> those sites to the central site it's used a dedicated fiber with a MUX from
> Siemens.
>
> That mux divides the fiber on many channels. Most of all to data, and 1 it
> converts to a "CAS R2" to 30 Hot-Lines(E+M) that are conected on legacy
> PABX.
> On central site this "CAS R2" E1 channel go to a MD110 Ericson.
>
> The information that the signaling in E1 channel its "CAS R2" cames from
> Siemens people.
>
> We tried to connect 1 of this channels on a Khomp board.
> The Khomp didn't reconized the signaling.
>
> Does anybody has alredy used a R2 diferrent from MFC-R2?
> Does anybody has alredy used a MUX like that?
>
>
> --
> Douglas Fernando Fischer
> Engº de Controle e Automação
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
Asterisk user number: 1099
Linux user: #443184
shazaum.googlepages.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090331/ca3f0b6a/attachment-0001.htm