[asterisk-r2] Elastix 1.5 , Digium TE110P,dahdi and libopenr2

[Melcon Moraes]

I suppose you need to specify channels on  /etc/asterisk/dahdi-channels as well.

channel => 1-15,17-31

Right after the last mfcr2 setting.

-MM

On Sun, Mar 29, 2009 at 10:22 PM,  <gabriel at arlab.com.ar> wrote:
> Hi guys! recently the elastix distribution include native support for the
> libopenr2 in the version  1.5, I've install it and the dadhi-tools detect my
> board and everything goes green, i'm also have and tdm400 analogic board (its
> work fine) I set up, in /etc/asterisk/dahdi-channels, the mfcr2 signalling for
> Telecom Argentina, in the asterisk console the command mfcr2 show channels get
> me an empty set also the dadhi show channels only showme the analogic channels
>
> any ideas ?
> I paste bin all my configuration here http://pastebin.com/m5b58a79e
>
> Thanks in advance,
>
> Gabriel Monsalvo.
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>