[asterisk-r2] Don't see channels in openr2

[Carlos Rangel]

Yes seemed to be pretty logical, but as I said I am fairly new to openr2 and dahdi. I assumed something like that. But I wasn't sure if configured it in dahdi or system.conf.

 

Thanks Moy

 

Best Regards

 
> Date: Mon, 23 Mar 2009 21:50:25 -0600
> From: moises.silva at gmail.com
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] Don't see channels in openr2
> 
> you forgot to add the channels parameter, how chan_dahdi is supposed
> to know which dahdi devices to use?
> 
> channel=x-x
> 
> On Mon, Mar 23, 2009 at 8:06 PM, Carlos Rangel <crangeltpmex at hotmail.com> wrote:
> >  Hello
> > I installed Openr2 with patch in Asterisk 1.4.23 (Centos 5. 2) in a trixbox
> > 2.6.2 machine
> > following up the guide. These are the steps I followed:
> >
> > Installed dahdi-linux-2.1.0.4.
> > cd dahdi-linux-2.1.0.4.
> > make $ make install
> >
> > Installed dahdi-tools-2.1.0.2.
> > cd dahdi-tools-2.1.0.0.
> > ./configure –prefix=/usr
> > make $ make install
> >
> >  Install openr2-1.1.0.tar in /usr/src
> >  ./configure –prefix=/usr
> >  make & make install
> >
> > Install automake
> > Install autoconf 2.60
> >
> > Patch and Install asterisk
> > patch -p0 < openr2-asterisk-1.4.23.patch
> >
> > Install automake (needed for  ./bootstrap.sh)
> >
> > ./bootstrap.sh
> >
> > Install asterisk
> >  ./configure –prefix=/usr
> >  make & make install
> >
> > configure /etc/dahdi/sys.conf with
> >
> >
> > span=1,1,0,cas,hdb3
> >
> > cas=1-15:1101
> >
> > dchan=16
> >
> > cas=17-31:1101
> >
> > Everything run just fine  and when I run the command I see the right output
> >
> > #ldd channels/chan_dahdi.so | grep openr2
> >   libopenr2.so.1 => /usr/lib/libopenr2.so.1 (0x00643000)
> >
> > However I cannot make calls. When I run the comand "mfcr2 show channels" in
> > CLI I dont see the channels
> >
> > trixbox1*CLI>  mfcr2 show channels
> > Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
> >
> > This is my chan_dahdi.conf file. I am pretty new to openr2 so there are
> > chances that I did not configure something correctly. I use Freepbx and the
> > trunk is DAHDI/g1/$OUTNUM$ the E1 is from Telmex (MEXICO)
> >
> >  http://pastebin.com/m6ea672c5
> >
> > I appreciatte any help.
> >
> > Thanks
> > CR
> >
> >
> > ________________________________
> > No olvides consultar tus correos desde la ventana principal de Messenger
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> 
> 
> 
> -- 
> "I do not agree with what you have to say, but I’ll defend to the
> death your right to say it." Voltaire
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2

_________________________________________________________________
¿Ya compartes fotos y videos por Messenger?
www.messengernews.com.mx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090324/74f909d4/attachment.htm