[asterisk-r2] Sangoma A101 + OpenR2 + Axtel (Mexico City)

[OrvUx]

    If you are using Dahdi you need to use:

    Dial(Dahdi/g0/${EXTEN},40)

-- 
OrvUx
Making the Hard...Soft with Debian GNU/Linux... ;)



On Fri, 2009-06-05 at 14:07 -0500, Ricardo Melendez Rosales wrote:

> Hi, to all, I`m very new to OpenR2, I just have installed some
> asterisk servers using unicall + digium cards + telmex (all works
> fine), but now I have the need to install a Sangoma A101 + OpenR2 +
> Axtel.
> 
> I have called Axtel support and they confirm to me some data:
> 
> Signalling = R2
> ANIS = 10
> DNIS = 4
> 
> Also I'am using elastix 1.5.2-2 but this not properly detect sangoma
> hardware, It detects the cars as T1, well I have configured the card
> and have alarms in GREEN (OK).
> 
> The dahdi_cfg display no errors, the 'mfcr2 show channels' show 30
> channels, and 'dahdi show channels' also.
> 
> But the calls don't fall, the line sounds busy, nor outbound calls
> work.
> 
> Any suggestion?
> Some special parameter with Axtel (Mexico DF) Provider?
> 
> I'm using Elastix, it is using the Dial(Zap/g0)  in outbound, is this
> correct?
> 
> Thanks for any comment.
> 
> Ricardo
> 
> 
> 
> 
> 
> ______________________________________________________________________
> Tu vida, tus amigos y lo que te interesa está en Perfil de Windows
> Live. Actualízalo.
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090605/62ca552c/attachment.htm