[asterisk-r2] Issue with Asterisk and Openr2

[Melcon Moraes]

I think you should try change:
    span=1,0,0,cas,hdb3
to:
    span=1,1,0,cas,hdb3

in your system.conf. That means the far end will provide the clock to
sync, in this case, the telco as it should be.

-
MM

On Tue, Jul 14, 2009 at 11:10 AM, Juan Carlos Gonzalez
Cardona<juancarlosg6 at gmail.com> wrote:
>
> Hi everyone, i have a problem my system configuration is:
> Asterisk 1.4.25.1
> Sangoma Card A101
> Provider ETB Colombia
>
> The out channels not found, all channels is busy when i see...
>
> pbxv*CLI> mfcr2 show channels
>
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
>
> 1 AR 20 4 No No SEIZE ANSWER
>
> 2 AR 20 4 No No IDLE IDLE
>
> 3 AR 20 4 No No IDLE IDLE
>
> 4 AR 20 4 No No IDLE 0x08
>
> 5 AR 20 4 No No IDLE 0x08
>
> 6 AR 20 4 No No IDLE 0x08
>
> 7 AR 20 4 No No IDLE 0x08
>
> 8 AR 20 4 No No IDLE 0x08
>
> 9 AR 20 4 No No IDLE 0x08
>
> 10 AR 20 4 No No IDLE 0x08
>
> 11 AR 20 4 No No IDLE 0x08
>
> 12 AR 20 4 No No IDLE 0x08
>
> 13 AR 20 4 No No IDLE 0x08
>
> 14 AR 20 4 No No IDLE 0x08
>
> 15 AR 20 4 No No IDLE IDLE
>
> 17 AR 20 4 No No IDLE 0x08
>
> 18 AR 20 4 No No IDLE 0x08
>
> 19 AR 20 4 No No IDLE 0x08
>
> 20 AR 20 4 No No IDLE 0x08
>
> 21 AR 20 4 No No IDLE 0x08
>
> 22 AR 20 4 No No IDLE 0x08
>
> 23 AR 20 4 No No IDLE 0x08
>
> 24 AR 20 4 No No IDLE 0x08
>
> 25 AR 20 4 No No IDLE 0x08
>
> 26 AR 20 4 No No IDLE 0x08
>
> 27 AR 20 4 No No IDLE 0x08
>
> 28 AR 20 4 No No IDLE 0x08
>
> 29 AR 20 4 No No IDLE 0x08
>
> 30 AR 20 4 No No IDLE 0x08
>
> 31 AR 20 4 No No IDLE IDLE
>
> pbxv*CLI> quit
>
> I call to my provider and say in their system all status is ok, and the
> channels are showed avaible
>
>
> Whe i restart the server all channels are IDLE again,
> Dahdi configuration:
>
> [root at pbxv ~]# vim /etc/asterisk/chan_dahdi.conf
>
> ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
>
> [trunkgroups]
>
> [channels]
>
> context=default
>
> language=es
>
> usecallerid=yes
>
> hidecallerid=no
>
> callwaiting=yes
>
> usecallingpres=yes
>
> callwaitingcallerid=yes
>
> threewaycalling=yes
>
> transfer=yes
>
> canpark=yes
>
> cancallforward=yes
>
> callreturn=yes
>
> echocancel=yes
>
> echocancelwhenbridged=yes
>
> relaxdtmf=yes
>
> rxgain=0.0
>
> txgain=0.0
>
> callgroup=1
> pickupgroup=1
> immediate=no
> callgroup=1
> pickupgroup=1
> immediate=no
> group=1
> context=from-pstn
> signalling=mfcr2
> mfcr2_variant=ar
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> ; this is for debugging purposes
> mfcr2_logdir=log
> mfcr2_logging=all
> ; end debugging configuration
> channel => 1-15
> channel => 17-31
>
> my /etc/dahdi/system.conf
>
> loadzone=ar
> defaultzone=ar
>
> #Sangoma A101 port 1 [slot:4 bus:12 span:1] <wanpipe1>
> span=1,0,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
>
>
>
> Thanks.
>
> --
> Juan Carlos Gonzalez C.
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>