[asterisk-r2] Issue with Asterisk and Openr2

[Juan Carlos Gonzalez Cardona]

Hi everyone, i have a problem my system configuration is:
Asterisk 1.4.25.1
Sangoma Card A101
Provider ETB Colombia

The out channels not found, all channels is busy when i see...

pbxv*CLI> mfcr2 show channels

Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS

1 AR 20 4 No No SEIZE ANSWER

2 AR 20 4 No No IDLE IDLE

3 AR 20 4 No No IDLE IDLE

4 AR 20 4 No No IDLE 0x08

5 AR 20 4 No No IDLE 0x08

6 AR 20 4 No No IDLE 0x08

7 AR 20 4 No No IDLE 0x08

8 AR 20 4 No No IDLE 0x08

9 AR 20 4 No No IDLE 0x08

10 AR 20 4 No No IDLE 0x08

11 AR 20 4 No No IDLE 0x08

12 AR 20 4 No No IDLE 0x08

13 AR 20 4 No No IDLE 0x08

14 AR 20 4 No No IDLE 0x08

15 AR 20 4 No No IDLE IDLE

17 AR 20 4 No No IDLE 0x08

18 AR 20 4 No No IDLE 0x08

19 AR 20 4 No No IDLE 0x08

20 AR 20 4 No No IDLE 0x08

21 AR 20 4 No No IDLE 0x08

22 AR 20 4 No No IDLE 0x08

23 AR 20 4 No No IDLE 0x08

24 AR 20 4 No No IDLE 0x08

25 AR 20 4 No No IDLE 0x08

26 AR 20 4 No No IDLE 0x08

27 AR 20 4 No No IDLE 0x08

28 AR 20 4 No No IDLE 0x08

29 AR 20 4 No No IDLE 0x08

30 AR 20 4 No No IDLE 0x08

31 AR 20 4 No No IDLE IDLE

pbxv*CLI> quit
I call to my provider and say in their system all status is ok, and the
channels are showed avaible


Whe i restart the server all channels are IDLE again,
Dahdi configuration:

[root at pbxv ~]# vim /etc/asterisk/chan_dahdi.conf

;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]

[channels]

context=default

language=es

usecallerid=yes

hidecallerid=no

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=yes

echocancelwhenbridged=yes

relaxdtmf=yes

rxgain=0.0

txgain=0.0

callgroup=1
pickupgroup=1
immediate=no
callgroup=1
pickupgroup=1
immediate=no
group=1
context=from-pstn
signalling=mfcr2
mfcr2_variant=ar
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
; this is for debugging purposes
mfcr2_logdir=log
mfcr2_logging=all
; end debugging configuration
channel => 1-15
channel => 17-31

my /etc/dahdi/system.conf

loadzone=ar
defaultzone=ar

#Sangoma A101 port 1 [slot:4 bus:12 span:1] <wanpipe1>
span=1,0,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101



Thanks.


-- 
Juan Carlos Gonzalez C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090714/06bba0cf/attachment.htm