[asterisk-r2] Protocol error. Reason = Seize Timeout - Openr2
Moises Jacobo
moy at tonalaonline.net
Tue Jul 7 23:03:05 CDT 2009
Hi, maybe mi answer is very simple but i had a similar error and change
mfcr2_category=national_subscriber
for mfcr2_category=national_priority_subscriber
> Hi,
>
> I have this problem.
>
> Asterisk 1.4.22
> OpenR2 version: 1.1.0
> zaptel 1.4.12.1
>
> receive incoming calls but can not make outgoing calls!!
>
>
> chan-3-forward-0-20090707181008.call
>
> [18:10:08:943] [Thread: 3055303568] [Chan 3] - Call started at Tue Jul 7
> 18:10:08 2009 on chan 3
> [18:10:08:943] [Thread: 3055303568] [Chan 3] - CAS Tx >> [SEIZE] 0x00
> [18:10:08:943] [Thread: 3055303568] [Chan 3] - CAS Raw Tx >> 0x01
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - Attempting to cancel timer
> timer 2
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - timer id 2 found,
> cancelling
> it now
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - calling timer callback
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - Seize Timeout Expired!
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - Protocol error. Reason =
> Seize Timeout, R2 State = Seize Transmitted, MF state = MF Engine Off, MF
> Group = Forward MF init, CAS = 0x08
> DNIS = XXXXX, ANI = 2000, MF = 0x20
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - Attempting to cancel timer
> timer 0
> [18:10:16:962] [Thread: 3055303568] [Chan 3] - Cannot cancel timer 0
>
> ***************************************************************************************************
> pbx*CLI> mfcr2 show channels
>
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
> 1 ITU 20 10 No No SEIZE IDLE
> ------------------------------------------> here!
> 2 ITU 20 10 No No IDLE IDLE
> 3 ITU 20 10 No No IDLE IDLE
> 4 ITU 20 10 No No IDLE IDLE
> 5 ITU 20 10 No No IDLE IDLE
> 6 ITU 20 10 No No IDLE IDLE
> 7 ITU 20 10 No No IDLE IDLE
> 8 ITU 20 10 No No IDLE IDLE
> 9 ITU 20 10 No No IDLE IDLE
> 10 ITU 20 10 No No IDLE IDLE
> 11 ITU 20 10 No No IDLE IDLE
> 12 ITU 20 10 No No IDLE IDLE
> 13 ITU 20 10 No No IDLE IDLE
> 14 ITU 20 10 No No IDLE IDLE
> 15 ITU 20 10 No No IDLE IDLE
> 17 ITU 20 10 No No IDLE IDLE
> 18 ITU 20 10 No No IDLE IDLE
> 19 ITU 20 10 No No IDLE IDLE
> 20 ITU 20 10 No No IDLE IDLE
> 21 ITU 20 10 No No IDLE IDLE
> 22 ITU 20 10 No No IDLE IDLE
> 23 ITU 20 10 No No IDLE IDLE
> 24 ITU 20 10 No No IDLE IDLE
> 25 ITU 20 10 No No IDLE IDLE
> 26 ITU 20 10 No No IDLE IDLE
> 27 ITU 20 10 No No IDLE IDLE
> 28 ITU 20 10 No No IDLE IDLE
> 29 ITU 20 10 No No IDLE IDLE
> 30 ITU 20 10 No No IDLE IDLE
> 31 ITU 20 10 No No IDLE IDLE
>
> ***************************************************************************************************
>
> zaptel.conf
> --------------------------------
> loadzone=fr
> defaultzone=fr
>
> #Sangoma A101 port 1 [slot:4 bus:11 span:1] <wanpipe1>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
> ##sks=1
>
> #Sangoma AFT-A200 [slot:4 bus:15 span:2] <wanpipe2>
> fxsks=32
> fxsks=33
> fxsks=34
> fxsks=35
> fxsks=36
> fxsks=37
> fxsks=38
> fxsks=39
> *******************************************************
> zapata.conf
>
> [trunkgroups]
>
> [channels]
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=no
> faxdetect=incoming
> faxdetect=both
> faxdetect=outgoing
> faxdetect=no
>
> ;Sangoma A101 port 1 [slot:4 bus:11 span:1] <wanpipe1>
> signalling=mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=10
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
> mfcr2_call_files=yes
> context=entrada
> group=0
> callgroup=0
> pickupgroup=0
> channel => 1-15
> channel => 17-31
>
> ;Sangoma AFT-A200 [slot:4 bus:15 span:2] <wanpipe2>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 32
>
> ;LINEA CELULAR
> context=entrada
> group=2
> signalling = fxs_ks
> channel => 33
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 34
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 35
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 36
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 37
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 38
>
> context=entrada
> group=0
> signalling = fxs_ks
> channel => 39
> *******************************************************
>
> sincerely itself not that but to do!!!
>
> thk.
>
> Stanlee Santana
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
More information about the asterisk-r2
mailing list