[asterisk-r2] asterisk-r2 Digest, Vol 2, Issue 19

[gabriel at arlab.com.ar]

Hello list!

i'm implementing a E1 line from Telecom Argentina
in the debug i see this messages thousand times:
"Protocol error. Reason = Invalid CAS"
I think the parameters from zaptel.conf are wrong but i can't find in Internet
the correct parameters ?
any body can help me?
zaptel.conf

# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1100
cas=17-31:1100
dchan=16

# Global data

loadzone        = ar
defaultzone     = ar

Zapata.conf mfcr2 config:

signalling=mfcr2
mfcr2_variant=ar
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all


thanks in advance,

Ing. Gabriel Monsalvo
ARLAB Tecnologia Informatica



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.