[asterisk-r2] Probles with Unicall
Dante Palma
dantecomm at hotmail.com
Sat Nov 22 16:46:23 CST 2008
Hello everyone
I'm trying to follow this guide but I have a problem, when i write the "./configure --libdir=/usr/lib" command, the system answer whit this "-bash: ./configure: No existe el fichero o el directorio" (-bash: ./configure: The file or directory don't exist)
I have seen it, and it exist. I don' knew what to do, someone can helpme?
Thanks in advance.
> Date: Wed, 19 Nov 2008 10:11:45 -0600
> From: moy at tonalaonline.net
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] Probles with Unicall
>
> Hi, Rafael, maybe you should upgrade to asterisk mfcr2 and openr2
> i use this script to install the new version in a centos 5.2,
> only put in a script and run from /usr/src/, maybe take 15 or 20 min to
> install.
> ########################################
> #/bin/bash/
> wget
> http://downloads.digium.com/pub/telephony/dahdi-linux/dahdi-linux-2.0.0.tar.gz
> wget
> http://downloads.digium.com/pub/telephony/dahdi-tools/dahdi-tools-2.0.0.tar.gz
> wget http://downloads.digium.com/pub/libpri/releases/libpri-1.4.7.tar.gz
> wget
> http://downloads.digium.com/pub/asterisk/releases/asterisk-addons-1.6.0.tar.gz
> ls | while read pack; do tar -xvzf $pack ; done
> svn checkout svn://libopenr2.org/openr2/trunk/ libopenr2
> svn co http://svn.digium.com/svn/asterisk/team/moy/mfcr2 asterisk
> cd dahdi-linux-2.0.0/
> make ;
> make install ;
> cd ../dahdi-tools-2.0.0/ ;
> ./configure ;
> make ;
> make install ;
> make config ;
> cd ../libpri-1.4.7/
> ./configure --libdir=/usr/lib ;
> make ;
> make install ;
> cd ../libopenr2/
> ./configure --libdir=/usr/lib ;
> make ;
> make install ;
> cd ../asterisk/
> ./configure ;
> make ;
> make install ;
> make samples ;
> ##############################################################
>
> Rafael Rosas escribió:
> > Hi, every body.
> >
> > I just configure an astunicall-1.4.21.2-0.1.
> > But i have probles with sync, when asterisk start i just receibe one
> > call then it falls.
> >
> > these is the log
> >
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/27 event Alarm
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2868 handle_uc_event:
> > Unicall/27 Alarm masks 0x001C 0x001C
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/27 Alarm Red Alarm raised, Red Alarm cleared
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/28 event Alarm
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2868 handle_uc_event:
> > Unicall/28 Alarm masks 0x001C 0x001C
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/28 Alarm Red Alarm raised, Red Alarm cleared
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/29 event Alarm
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2868 handle_uc_event:
> > Unicall/29 Alarm masks 0x001C 0x001C
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/29 Alarm Red Alarm raised, Red Alarm cleared
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/30 event Alarm
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2868 handle_uc_event:
> > Unicall/30 Alarm masks 0x001C 0x001C
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/30 Alarm Red Alarm raised, Red Alarm cleared
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/31 event Alarm
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2868 handle_uc_event:
> > Unicall/31 Alarm masks 0x001C 0x001C
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] WARNING[2321]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/31 Alarm Red Alarm raised, Red Alarm cleared
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] WARNING[2479]: chan_unicall.c:2873 handle_uc_event:
> > Unicall/8 Alarm Red Alarm raised, Red Alarm cleared
> >
> > [KPbxGdl*CLI>
> > MFC/R2 UniCall/1 <- 1101 [1/IDLE /Idle /Idle ]
> >
> > [KPbxGdl*CLI>
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/1 event Far end blocked
> > -- Unicall/1 far blocked
> > MFC/R2 UniCall/2 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/2 event Far end blocked
> > -- Unicall/2 far blocked
> > MFC/R2 UniCall/3 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/3 event Far end blocked
> > -- Unicall/3 far blocked
> > MFC/R2 UniCall/4 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/4 event Far end blocked
> > -- Unicall/4 far blocked
> >
> > [KPbxGdl*CLI>
> > MFC/R2 UniCall/5 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/5 event Far end blocked
> > -- Unicall/5 far blocked
> > MFC/R2 UniCall/6 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/6 event Far end blocked
> > -- Unicall/6 far blocked
> > MFC/R2 UniCall/9 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/9 event Far end blocked
> > -- Unicall/9 far blocked
> > MFC/R2 UniCall/10 <- 1101 [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:41] NOTICE[2321]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/10 event Far end blocked
> > -- Unicall/10 far blocked
> > [Nov 18 16:57:42] NOTICE[2478]: chan_unicall.c:1914
> > unicall_exception: Exception on 29, channel 7
> > MFC/R2 UniCall/7 <- 1101 [1/CONNECTD/Answer /Accepted Paid]
> > MFC/R2 UniCall/7 R2 prot. err. [1/CONNECTD/Answer /Accepted Paid]
> > cause 32773 - Unexpected CAS bit pattern
> > MFC/R2 UniCall/7 1001 -> [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:42] NOTICE[2478]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/7 event Protocol failure
> > [Nov 18 16:57:42] ERROR[2478]: chan_unicall.c:25 22 handle_uc_event:
> > Unicall/7 protocol error. Cause 32773
> > MFC/R2 UniCall/7 Channel echo cancel
> > [Nov 18 16:57:42] NOTICE[2479]: chan_unicall.c:1914 unicall_exception:
> > Exception on 30, channel 8
> > MFC/R2 UniCall/8 <- 1101 [1/CONNECTD/Answer /Accepted Paid]
> > MFC/R2 UniCall/8 R2 prot. err. [1/CONNECTD/Answer /Accepted Paid]
> > cause 32773 - Unexpected CAS bit pattern
> > MFC/R2 UniCall/8 1001 -> [1/IDLE /Idle /Idle ]
> > [Nov 18 16:57:42] NOTICE[2479]: chan_unicall.c:2518 handle_uc_event:
> > Unicall/8 event Protocol failure
> > [Nov 18 16:57:42] ERROR[2479]: chan_unicall.c:2522 handle_uc_event:
> > Unicall/8 protocol error. Cause 32773
> > MFC/R2 UniCall/8 Channel echo cancel
> >
> > Please any idea!
> > Recien acabo de instalar Inicall
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> >
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
_________________________________________________________________
Es tu última oportunidad para ganar premios por el simple hecho de buscar en internet.
http://www.ganabuscando.com/Default.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20081122/6bb43725/attachment.htm
More information about the asterisk-r2
mailing list