[asterisk-r2] Asterisk R2 configuration

[Camilo Quelquejeu]

and i should connect the cross over cable from one E1 port to the other? 
to create a loop correct? on that same note will any cross over cable 
work of i need to have that specific crossover cable with the diagram 
moy provided?

Camilo

Melcon Moraes wrote:
> Buying Moy's advice on crossover E1 cable should help you. That would
> be a nice starting point.
> 
> -MM
> 
> On Tue, Nov 18, 2008 at 2:17 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>> and the only way to check that is with the cable right?
>>
>> Camilo
>>
>> Moises Silva wrote:
>>> unicall has nothing to do with the red alarms.
>>>
>>> check your installation? yes, when you get rid of the red alarms. The
>>> first thing is to get rid of the red alarms, and red alarms mean you
>>> connected something physically wrong or you configured the zaptel.conf
>>> wrong for the type of link provided.
>>>
>>> On Tue, Nov 18, 2008 at 9:24 AM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>>> Is there any chance i have the compilation and instalation of the
>>>> unicall wrong, hence the red alarms? is there any way i can check my
>>>> instalation?
>>>>
>>>> Camilo
>>>>
>>>> Moises Silva wrote:
>>>>> I don't see anything wrong with your config, but looks suspicious to
>>>>> me that you are using span=2,0,0
>>>>>
>>>>> Are you use you want span 2 to be the master?
>>>>>
>>>>> In any case, you can create a E1 cross-over cable to verify your own
>>>>> configuration without the telco. check this out:
>>>>> http://www.moythreads.com/unicall/e1_crossover.html
>>>>>
>>>>> That way you will discard your configuration and can call the telco to
>>>>> ask why your link is down.
>>>>>
>>>>> On Thu, Oct 30, 2008 at 1:47 PM, Camilo Quelquejeu <camilo at cabimax.com> wrote:
>>>>>> the zaptel.conf goes like this
>>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED
>>>>>> span=1,1,0,cas,hdb3
>>>>>> cas=1-15:1101
>>>>>> cas=17-31:1101
>>>>>> #
>>>>>> span=2,0,0,cas,hdb3
>>>>>> cas=32-46:1101
>>>>>> cas=48-62:1101
>>>>>>
>>>>>>
>>>>>> # Global data
>>>>>>
>>>>>> loadzone        = br
>>>>>> defaultzone     = br
>>>>>>
>>>>>>
>>>>>>
>>>>>> and the ztcfg -v  goes like this
>>>>>>
>>>>>> SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>> SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>>>
>>>>>> 60 channels to configure.
>>>>>>
>>>>>>
>>>>>>
>>>>>> thanks in advanced for the help
>>>>>>
>>>>>> Camilo
>>>>>>
>>>>>> Moises Silva wrote:
>>>>>>> It could be caused by the moon :) who knows, without showing your
>>>>>>> zaptel.conf and pastebin of the output of ztcfg -vv we cannot try to
>>>>>>> answer.
>>>>>>>
>>>>>>> On Thu, Oct 30, 2008 at 11:20 AM, Camilo Quelquejeu <camilo at cabimax.com>
>>>>>>> wrote:
>>>>>>>> I installed, compiled and configured the astunicall, and when i use the
>>>>>>>> ztcfg -v command, it tells me there are 60 channels to be configured and
>>>>>>>> the zttool shows the card with a red alarm, what could be the cause of
>>>>>>>> this? does anyone know how to configure the extensions.conf so i can use
>>>>>>>> the unicall channels to receive calls in El salvador?
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Camilo Quelquejeu
>>>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>>
>>>>>>>> asterisk-r2 mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>>
>>>>>> --
>>>>>> Camilo Quelquejeu
>>>>>> Chief IT  |  Cabimax, S.A.
>>>>>> camilo at cabimax.com  Tel: 302-7424
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>> --
>>>> Camilo Quelquejeu
>>>> Chief IT  |  Cabimax, S.A.
>>>> camilo at cabimax.com  Tel: 302-7424
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>> --
>> Camilo Quelquejeu
>> Chief IT  |  Cabimax, S.A.
>> camilo at cabimax.com  Tel: 302-7424
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
> 
> 

-- 
Camilo Quelquejeu
Chief IT  |  Cabimax, S.A.
camilo at cabimax.com  Tel: 302-7424