[asterisk-gui] Dialing out

[Bob Crandell]

Once I got the wires plugged into the right ports, I discovered ztcfg
wasn't running, fixed that.  Now a softphone can call out but a handset
can't.

Here is a little more info:
# asterisk -vvvvvvr
Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
for details.
This is free software, with components licensed under the GNU General
Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf': Found
  == Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.21.2 currently running on asterisk (pid =
3223)
Verbosity is at least 6

asterisk*CLI> zap show channels
   Chan Extension  Context         Language   MOH Interpret
 pseudo            DLPN_DialPlan1             default
      1            DID_trunk_1                default
      4            DLPN_DialPlan1             default

With the handset on hook:
asterisk*CLI> zap show channel 4
Channel: 4LI>
File Descriptor: 25
Span: 1k*CLI>
Extension: I>
Dialing: noI>
Context: DLPN_DialPlan1
Caller ID: 6002
Calling TON: 0
Caller ID name: Bob Crandell
Destroy: 0LI>
InAlarm: 0LI>
Signalling Type: FXO Kewlstart
Radio: 0*CLI>
Owner: <None>
Real: <None>>
Callwait: <None>
Threeway: <None>
Confno: -1LI>
Propagated Conference: -1
Real in conference: 0
DSP: nok*CLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook

With the handset off hook:
asterisk*CLI> zap show channel 4
Channel: 4LI>
File Descriptor: 25
Span: 1k*CLI>
Extension: I>
Dialing: noI>
Context: DLPN_DialPlan1
Caller ID: 6002
Calling TON: 0
Caller ID name: Bob Crandell
Destroy: 0LI>
InAlarm: 0LI>
Signalling Type: FXO Kewlstart
Radio: 0*CLI>
Owner: <None>
Real: <None>>
Callwait: <None>
Threeway: <None>
Confno: -1LI>
Propagated Conference: -1
Real in conference: 0
DSP: nok*CLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook


On Tue, 2009-02-17 at 14:05 -0600, Ryan Brindley wrote:
> Bob,
> If you're in Asterisk's CLI, make sure you have verbosity past 3
> ('core set verbose 3') and then try to make an outbound call. You
> should see a bit of dialplan scroll on the screen and look for errors
> there. Copy and paste em here if you find any and don't know what to
> do.
> --                 
> Ryan Brindley                 
> Digium, Inc. | Software Developer                 
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA                 
> main: +1 256-428-6000   fax: +1 256-864-0464                 
> Check us out at: http://digium.com & http://asterisk.org
> 
> ----- Original Message -----
> From: "Bob Crandell" <bob at assuredcomp.com>
> To: "Asterisk GUI" <asterisk-gui at lists.digium.com>
> Sent: Tuesday, February 17, 2009 1:30:07 PM GMT -06:00 US/Canada
> Central
> Subject: [asterisk-gui] Dialing out
> 
> Hi All,
> 
> Fresh install.  There are 2 Digium cards, 1 with 2 FXO ports and 1
> with
> 2 FXS ports.  These show up in "Configure Hardware".  I added a trunk
> with these ports, configured Outgoing Calling Rules, setup a dial plan
> that included everything and added 2 users which can call each other.
> 
> Neither user can call out.  There are no errors in the log that I can
> see.
> 
> What did I miss?
> 
> Thanks
> -- 
> Bob Crandell
> Assured Computing, Inc.
> http://www.assuredcomp.com/
> 541-868-0331
> ComputerBase
> http://www.computerbaseusa.com/
> 541-349-0404
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090302/d87582fb/attachment.htm