[asterisk-gui] Busy

Fri Jul 10 19:50:02 CDT 2009

Hi Matt,

Yes I have created the incoming calling rules via the GUI.  In fact I deleted them, rebooted and recreated them.
Is this the current GUI?
Asterisk GUI-version : SVN-branch-2.0-r4962

This is from and outbound call (which works):
[Jul 10 17:28:01] WARNING[15898]: chan_dahdi.c:2010 dahdi_enable_ec: Unable to enable echo cancellation on channel 9 (No such device)
[Jul 10 17:28:01] WARNING[15898]: chan_dahdi.c:2010 dahdi_enable_ec: Unable to enable echo cancellation on channel 1 (No such device)
    -- Hungup 'DAHDI/1-1'
  == Spawn extension (macro-trunkdial-failover-0.3, 1-dial, 1) exited non-zero on 'DAHDI/9-1' in macro 'trunkdial-failover-0.3'
  == Spawn extension (DLPN_CBPlan, 5551234, 1) exited non-zero on 'DAHDI/9-1'
    -- Hungup 'DAHDI/9-1'
Where do I look to see why it would think the 2 channels don't exist yet allow an outbound call?
I'm hoping these problems are related so fixing one fixes the other.

Thanks
Bob

>>> Matt Sales <msales at gmail.com> 7/10/2009 9:56 AM >>>
Have you created incoming calling rules via the GUI for the analog trunk? Looks like it's hitting the s extension in teh DID_trunk_1 context in extensions.conf.

On Thu, Jul 9, 2009 at 11:42 AM, Bob Crandell <bob at assuredcomp.com> wrote:

Ryan,
Ok. With that change we can call out now. 
Are you ready for this? ... Now we can't receive calls.
Here is the log:
Connected to Asterisk 1.6.0.9 currently running on PBX (pid = 14120) 
Verbosity was 3 and is now 6
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [s at DID_trunk_1:1] ExecIf("DAHDI/1-1", "0?SetCallerPres(unavailable)") in new stack
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN'
-- Hungup 'DAHDI/1-1'
-- Starting simple switch on 'DAHDI/1-1'
[Jul 9 08:35:52] NOTICE[14167]: chan_dahdi.c:7490 ss_thread: Got event 18 (Ring Begin)...
[Jul 9 08:35:54] NOTICE[14167]: chan_dahdi.c:7490 ss_thread: Got event 2 (Ring/Answered)...
-- Executing [s at DID_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack
[Jul 9 08:35:54] WARNING[14167]: app_setcallerid.c:69 setcallerid_pres_exec: SetCallerPres is deprecated. Please use Set(CALLERPRES()=unavailable) instead.
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN'
-- Hungup 'DAHDI/1-1'
-- Starting simple switch on 'DAHDI/1-1'
[Jul 9 08:36:04] NOTICE[14168]: chan_dahdi.c:7490 ss_thread: Got event 18 (Ring Begin)...
[Jul 9 08:36:06] NOTICE[14168]: chan_dahdi.c:7490 ss_thread: Got event 2 (Ring/Answered)...
-- Executing [s at DID_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN'
-- Hungup 'DAHDI/1-1'
-- Starting simple switch on 'DAHDI/1-1'
[Jul 9 08:36:16] NOTICE[14169]: chan_dahdi.c:7490 ss_thread: Got event 18 (Ring Begin)...
[Jul 9 08:36:18] NOTICE[14169]: chan_dahdi.c:7490 ss_thread: Got event 2 (Ring/Answered)...
-- Executing [s at DID_trunk_1:1] ExecIf("DAHDI/1-1", "1?SetCallerPres(unavailable)") in new stack
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN'
-- Hungup 'DAHDI/1-1'
PBX*CLI>
Is this the current GUI?
Asterisk GUI-version : SVN-branch-2.0-r4962
Thanks
Bob

>>> Ryan Brindley <rbrindley at digium.com> 7/8/2009 5:02 AM >>>
Bob,
Yes, you would be lookin at extensions.conf and under the [global] context for a line that starts with 'trunk_1='.
You can find your real info in users.conf. Look for your trunk context ([trunk_1] most likely) and then the group= variable and then go change your trunk_1 variable described earlier to "trunk_1=DAHDI/g<group number>".

-- 
Ryan Brindley 
Digium, Inc. | Software Developer 
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA 
main: +1 256-428-6000 fax: +1 256-864-0464 
Check us out at: http://digium.com & http://asterisk.org

----- Original Message -----
From: "Bob Crandell" <bob at assuredcomp.com>
To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
Sent: Tuesday, July 7, 2009 9:07:35 PM GMT -05:00 US/Canada Eastern
Subject: Re: [asterisk-gui] Busy

Ryan,
I'm supposed to be editing extensions.conf right?
How can I tell what the real info is supposed to be?
Thanks
Bob

>>> Ryan Brindley <rbrindley at digium.com> 7/7/2009 1:58 PM >>>
Bob,
Your problem is when the macro tries to dial DAHDI/trunk_1/5105555, if you look at the top of the page under your globals, your 'trunk_1' context should probably be something like 'trunk_1=DAHDI/trunk_1' that isn't correct and I believe was fixed in a recent commit when the GUI when under some heavy testing. If you haven't already I'd recommend deleting that trunk and re-creating it (assuming you're using a recent checkout of the GUI). If you have already done that, check http://issues.asterisk.org 's Asterisk-GUI project for open issues related to your issue or open a new issue and we'll get it resolved.

For now, to verify that this is in fact the problem (even though I'm pretty sure it is) you can change your trunk_1 variable to be whatever your real info is "DAHDI/g1" or whatever.

-- 
Ryan Brindley 
Digium, Inc. | Software Developer 
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA 
main: +1 256-428-6000 fax: +1 256-864-0464 
Check us out at: http://digium.com & http://asterisk.org

----- Original Message -----
From: "Bob Crandell" <bob at assuredcomp.com>
To: "Asterisk GUI" <asterisk-gui at lists.digium.com>
Sent: Tuesday, July 7, 2009 3:32:22 PM GMT -05:00 US/Canada Eastern
Subject: [asterisk-gui] Busy

Hi,
I'm almost ready to take this thing live and have just one more hurdle to beat. Any outbound call from any extension gets a busy signal. We can call each other's extensions. We can receive calls from outside. We just can't make calls.
Here is this:
Asterisk Build:
Asterisk/1.6.0.9
Asterisk GUI-version : SVN-branch-2.0-r4962
This from the log:
Verbosity was 3 and is now 6
-- Starting simple switch on 'DAHDI/9-1'
[Jul 7 12:28:33] WARNING[4754]: chan_dahdi.c:2010 dahdi_enable_ec: Unable to enable echo cancellation on channel 9 (No such device)
-- Executing [95105957 at DLPN_CBPlan:1] Macro("DAHDI/9-1", "trunkdial-failover-0.3,DAHDI/trunk_1/5105957,,trunk_1,") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:1] GotoIf("DAHDI/9-1", "0?1-fmsetcid,1") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:2] GotoIf("DAHDI/9-1", "0?1-setgbobname,1") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:3] Set("DAHDI/9-1", "CALLERID(num)=") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:4] GotoIf("DAHDI/9-1", "0?1-dial,1") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:5] Set("DAHDI/9-1", "CALLERID(all)=") in new stack
-- Executing [s at macro-trunkdial-failover-0.3:6] Goto("DAHDI/9-1", "1-dial,1") in new stack
-- Goto (macro-trunkdial-failover-0.3,1-dial,1)
-- Executing [1-dial at macro-trunkdial-failover-0.3:1] Dial("DAHDI/9-1", "DAHDI/trunk_1/5105555") in new stack
[Jul 7 12:28:33] WARNING[4754]: chan_dahdi.c:9331 dahdi_request: Unable to determine channel for data trunk_1/5105555
[Jul 7 12:28:33] WARNING[4754]: app_dial.c:1468 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [1-dial at macro-trunkdial-failover-0.3:2] GotoIf("DAHDI/9-1", "0 > 0 ?1-CHANUNAVAIL,1:1-out,1") in new stack
-- Goto (macro-trunkdial-failover-0.3,1-out,1)
-- Executing [1-out at macro-trunkdial-failover-0.3:1] Hangup("DAHDI/9-1", "") in new stack
== Spawn extension (macro-trunkdial-failover-0.3, 1-out, 1) exited non-zero on 'DAHDI/9-1' in macro 'trunkdial-failover-0.3'
== Spawn extension (DLPN_CBPlan, 95105555, 1) exited non-zero on 'DAHDI/9-1'
-- Hungup 'DAHDI/9-1'
I don't know what it means. Is this a problem with Asterisk? Is there someplace in the GUI I can go to fix it?
Thanks
Bob Crandell
Assured Computing, Inc.
541-868-0331
ComputerBase USA
541-349-0404

_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-gui

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090710/25c018f9/attachment.htm 