[asterisk-gui] Busy

[Bob Crandell]

Hi,
 
I'm almost ready to take this thing live and have just one more hurdle to beat.  Any outbound call from any extension gets a busy signal.  We can call each other's extensions.  We can receive calls from outside.  We just can't make calls.
 
Here is this:
Asterisk Build:
Asterisk/1.6.0.9
Asterisk GUI-version : SVN-branch-2.0-r4962
 
This from the log:
Verbosity was 3 and is now 6
    -- Starting simple switch on 'DAHDI/9-1'
[Jul  7 12:28:33] WARNING[4754]: chan_dahdi.c:2010 dahdi_enable_ec: Unable to enable echo cancellation on channel 9 (No such device)
    -- Executing [95105957 at DLPN_CBPlan:1] Macro("DAHDI/9-1", "trunkdial-failover-0.3,DAHDI/trunk_1/5105957,,trunk_1,") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:1] GotoIf("DAHDI/9-1", "0?1-fmsetcid,1") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:2] GotoIf("DAHDI/9-1", "0?1-setgbobname,1") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:3] Set("DAHDI/9-1", "CALLERID(num)=") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:4] GotoIf("DAHDI/9-1", "0?1-dial,1") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:5] Set("DAHDI/9-1", "CALLERID(all)=") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:6] Goto("DAHDI/9-1", "1-dial,1") in new stack
    -- Goto (macro-trunkdial-failover-0.3,1-dial,1)
    -- Executing [1-dial at macro-trunkdial-failover-0.3:1] Dial("DAHDI/9-1", "DAHDI/trunk_1/5105555") in new stack
[Jul  7 12:28:33] WARNING[4754]: chan_dahdi.c:9331 dahdi_request: Unable to determine channel for data trunk_1/5105555
[Jul  7 12:28:33] WARNING[4754]: app_dial.c:1468 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [1-dial at macro-trunkdial-failover-0.3:2] GotoIf("DAHDI/9-1", "0 > 0 ?1-CHANUNAVAIL,1:1-out,1") in new stack
    -- Goto (macro-trunkdial-failover-0.3,1-out,1)
    -- Executing [1-out at macro-trunkdial-failover-0.3:1] Hangup("DAHDI/9-1", "") in new stack
  == Spawn extension (macro-trunkdial-failover-0.3, 1-out, 1) exited non-zero on 'DAHDI/9-1' in macro 'trunkdial-failover-0.3'
  == Spawn extension (DLPN_CBPlan, 95105555, 1) exited non-zero on 'DAHDI/9-1'
    -- Hungup 'DAHDI/9-1'
I don't know what it means.  Is this a problem with Asterisk?  Is there someplace in the GUI I can go to fix it?
 
Thanks
 
 
 
Bob Crandell
Assured Computing, Inc.
541-868-0331
ComputerBase USA
541-349-0404

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090707/9b1fd7c3/attachment.htm