[asterisk-gui] "Checking write permission for gui folder"

Thu Jan 15 10:30:31 CST 2009

We already installed Asterisk-Gui-2.0.4 and wanted to configure the E1 but there was no option to add CRC4 to that as it was needed with our configuration so I had do it manually however the E1 Card is up and shows under the T1/E1 Trunk section of GUI.

1. Incoming calling rules page says based patterns not on DID (I might be missing something here? If so please explain?)
2. assigning channels?
3. some other GUIs I have seen has an option like assigning DAHDI/1gGrR something and so on? Its not there is GUI 2.0.4 surprisingly or you must rely on
   pattern based? Well it didn't worked for me.
4. for example I have a 100 DIDs starting from 22980000 (8Digits) till 22980099 and hunt number is 22980000 so where do I put this number or any other
   Number? On pattern box? If so then there should be a clear text put your DID or pattern isn't it?
Pardon my ignorance but im in a learning process of Asterisk and no training available in my region.

Regards,to
Rajesh Kumar
raj at alshaya-group.com
Alshaya Group International
Tel: +965 298-0555 Ext.- 307
Mobile: +965 722-4083

-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of Pari Nannapaneni
Sent: Thursday, January 15, 2009 7:07 PM
To: Asterisk GUI project discussion
Subject: Re: [asterisk-gui] "Checking write permission for gui folder"

if you are using zaptel,
download the last stable release of the gui - http://downloads.digium.com/pub/telephony/asterisk-gui/releases/asterisk-gui-2.0.4.tar.gz
and got to the hardware section, choose your framing/coding and other options
hit apply changes. This would automatically create a trunk - something like
span_1. You can define incoming rules based on DID in the incoming calling rules page.

If you are using DAHDI (work in progress, but should work fine)
checkout from - http://svn.digium.com/svn/asterisk-gui/team/pari/dahdi_support/
follow the rest of the steps as above.

-pari

--
Pari Nannapaneni
Digium, Inc. | Software Developer.
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org

----- Original Message -----
From: "Rajesh Kumar ( Alshaya Group International )" <raj at alshaya-group.com>
To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
Sent: Thursday, January 15, 2009 9:52:49 AM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-gui] "Checking write permission for gui folder"

Could you guys tell me how do you handle an E1 with GUI? I mean how do you assign channel? How do you assign DIDs? Or it's the entire project is still in BETA? As im not be able to so many things with GUI and wondering if its actually of any good use?

Regards,
Rajesh Kumar
raj at alshaya-group.com
Alshaya Group International
Tel: +965 298-0555 Ext.- 307
Mobile: +965 722-4083

-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of Tzafrir Cohen
Sent: Thursday, January 15, 2009 6:43 PM
To: asterisk-gui at lists.digium.com
Subject: Re: [asterisk-gui] "Checking write permission for gui folder"

On Wed, Dec 31, 2008 at 12:52:46AM +0200, Tzafrir Cohen wrote:
> On Tue, Dec 30, 2008 at 05:10:28PM -0500, Noah Miller wrote:
> > FYI: I forgot to mention you should also manually run:
> >
> > /var/lib/asterisk/scripts/detectdahdi.sh
> >
> > This will generate the necessary config file: dahdi_guiread.conf
> >
> > And then follow the instructions below.
>
> BTW: I can easily make dahdi_genconf output all the configuration it
> detected in an asterisk configuration file format.

Commited a slightly-modified version of that into DAHDI-tools:

URL: http://svn.digium.com/svn-view/dahdi?view=rev&rev=5661
Log:
Add an extra output format, 'asterisk': make the configuration readable
for an Asterisk configuration parser.

What do you think?

--
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui