[asterisk-gui] Asterisk-GUI does not have write access
Saad
skhankan at gmail.com
Fri May 16 06:52:50 CDT 2008
Ok, I followed your recommendations , still not able to add users through GUI. Please find bellow some more info.
My Mozilla browser version:
=================
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
My SVN revision:
===========
[root at SaadAsterisk ~]# svn --version
svn, version 1.4.2 (r22196)
compiled Mar 14 2007, 20:55:55
Copyright (C) 2000-2006 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).
The following repository access (RA) modules are available:
* ra_dav : Module for accessing a repository via WebDAV (DeltaV) protocol.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme
Command> core show version
Asterisk SVN-trunk-r114700 built by root @ SaadAsterisk on a i686 running Linux on 2008-04-27 15:19:29 UTC
Also from the GUI , when I click on "system info" , "Record a Menu", "voice Menu", "Back up", and "file Editor" I receive the error 404 not found. I reinstalled the Linux and followed Oreilly's (The future of telephoney) document to install asterisk ...Same problem. (pulling my hair).
What else can I do now?
Regards,
Saad
-----Original Message-----
From: Brandon Kruse [mailto:bkruse at digium.com]
Sent: May-15-08 9:56 AM
To: Saad
Cc: asterisk-gui at lists.digium.com
Subject: Re: [asterisk-gui] Asterisk-GUI does not have write access
After you make those changes, stop/start asterisk, then clear
your cache from your browser and retry.
What revision of the GUI / Browser are you using?
That should have fixed it.
-bk
----- Original Message -----
From: "Saad" <skhankan at gmail.com>
To: "bkruse" <bkruse at digium.com>
Cc: asterisk-gui at lists.digium.com
Sent: Wednesday, May 14, 2008 10:34:04 PM GMT -06:00 US/Canada Central
Subject: RE: [asterisk-gui] Asterisk-GUI does not have write access
Unfortunately, I Still have the same problem.
I did the change as you mentioned on my manager.conf, reloaded Asterisk and
even rebooted the box.
1. I added few extensions through the GUI.
2. Saved the change.
3. When I clicked on "user and phone configuration", this caused to lose all
of the previously added extensions..
4. When I add a conferencing extension it stays there after clicking on the
"user and phone configuration"..so this one is working fine.
Where to go now :-(
Saad
-----Original Message-----
From: bkruse [mailto:bkruse at digium.com]
Sent: May-14-08 11:44 AM
To: Saad
Cc: asterisk-gui at lists.digium.com
Subject: Re: [asterisk-gui] Asterisk-GUI does not have write access
Nevermind!
I see the problem
read = system,call,log,verbose,command,agent,user,config
write = system,call,log,verbose,command,agent,user,config
should be:
read = system,call,log,verbose,command,agent,user,config,read,write
write = system,call,log,verbose,command,agent,user,config,read,write
-bk
Saad wrote:
> The 501 error:
> ========
> I apologize for the confusion, I believe this 501 error was generated
> because I forgot to add the prefix "asterisk" to the link, after I added
> this prefix the error changed to 404. I'm able to login to the
> http://192.168.1.xxx:8088/asterisk/static/config/cfgbasic.html ; however,
> the advanced page http://192.168.1.xxx:8088/static/config/cfgadvanced.html
> is now showing this 404 error on the login attempts (404 Not Found,
Nothing
> to see here. Move along)
>
> The http.conf:
> ========
> [general]
> enabled = yes
> enablestatic = yes
> bindaddr = 0.0.0.0
> bindport = 8088
> prefix = asterisk
>
>
> The manager.conf:
> ===========
> [general]
> displaysystemname = yes
> enabled = yes
> webenabled = yes
> port = 5038
> httptimeout = 60
> bindaddr = 0.0.0.0
>
> [admin]
> secret = admin
> read = system,call,log,verbose,command,agent,user,config
> write = system,call,log,verbose,command,agent,user,config
>
>
> I changed the port number to 8440 but still experiencing the same problem
> (not able to save users through GUI, only conferencing users can be
saved).
>
> I also see "Restarted Asterisk!! " message continuously appears and
> disappears on the 1st page when I login to the Asterisk GUI.
>
> I'm not sure how to capture the SVN info of the GUI directory as I'm still
> very new to asterisk.
>
> Kind Regards,
> Saad
>
____________________________________________________________________________
> ____________________________________________________
> -----Original Message-----
> From: bkruse [mailto:bkruse at digium.com]
> Sent: May-13-08 1:40 PM
> To: Saad
> Cc: asterisk-gui at lists.digium.com
> Subject: Re: [asterisk-gui] Asterisk-GUI does not have write access
>
> That is super interesting.
>
> The only place in http.c (the asterisk http server) that issues a 501
> is if you try a method other than 'get'.
>
> Can you paste the svn info of the GUI directory, and your
> http.conf/manager.conf?
>
> Can you try using a different port than 8088, incase something else is
> using that?
>
> A screenshot would also be useful (does the 501 message include the
> asterisk footer)
>
> -bk
>
> Saad wrote:
>
>> FYI, The Asterisk packages I installed on my server are:
>> *# wget
>> http://downloads.digium.com/pub/asterisk/asterisk-1.4-current.tar.gz
>>
>> # wget http://downloads.digium.com/pub/libpri/libpri-1.4-current.tar.gz
>>
>> # wget http://downloads.digium.com/pub/zaptel/zaptel-1.4-current.tar.gz
>>
>>
>>
>> Regards,
>>
>> Saad
>>
>> *
>>
>> On Mon, May 12, 2008 at 3:10 PM, Saido <skhankan at gmail.com
>> <mailto:skhankan at gmail.com>> wrote:
>>
>> Dear Brandon and All,
>>
>> Here's my OS version:
>> ===============
>> [root at SaadAsterisk ~]# uname -a
>> Linux SaadAsterisk 2.6.18-53.1.14.el5xen #1 SMP Wed Mar 5 12:39:19
>> EST 2008 i686 i686 i386 GNU/Linux
>>
>> Asterisk GUI:
>> ==========
>> [root at SaadAsterisk asterisk-gui]# make -v
>> GNU Make 3.81
>> Copyright (C) 2006 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions.
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE.
>> This program built for i686-redhat-linux-gnu
>>
>>
>> One morething, this page:
>> http://192.168.1.xxx:8088/static/config/cfgadvanced.html is not
>> working as well( it shows" 501 Not Implemented" message)
>>
>> Thank you
>> Saad
>>
>>
>>
>>
>> ----- Original Message ----- From: "Brandon Kruse"
>> <bkruse at digium.com <mailto:bkruse at digium.com>>
>> To: "Asterisk GUI project discussion"
>> <asterisk-gui at lists.digium.com
<mailto:asterisk-gui at lists.digium.com>>
>> Sent: Monday, May 12, 2008 9:56 AM
>> Subject: Re: [asterisk-gui] Asterisk-GUI does not have write access
>>
>>
>>
>> What version of the GUI are you running?
>>
>> http://asteriskNOW.org/install-related
>> <http://asterisknow.org/install-related>
>>
>> (Thanks for the answer too Brandon :) )
>>
>> -bk
>>
>> ----- Original Message -----
>> From: "Saad" <skhankan at gmail.com <mailto:skhankan at gmail.com>>
>> To: asterisk-gui at lists.digium.com
>> <mailto:asterisk-gui at lists.digium.com>
>> Sent: Sunday, May 11, 2008 10:07:09 PM GMT -06:00 US/Canada
>> Central
>> Subject: [asterisk-gui] Asterisk-GUI does not have write access
>>
>> Hello,
>>
>>
>>
>> I'm using a CentOS 5 for the OS and Asterisk 1.4.19.
>> <http://1.4.19./> The gui is running and
>> fully accessible but when changes made will not save (i.e.:
>> add new
>> extension) . When i click on few other tabs on the side menu
>> sections i get
>> a Config Error: 404: Not Found. The manager.conf has write
>> access ;
>> however, I still receive a message "GUI does not have write
>> access!! Please
>> check manager.conf" when I log in to the gui.
>>
>> Here is my managers.conf:
>>
>> [manager.conf]
>> [admin]
>> secret={password}
>> read = system, call, log, verbose, agent, user, config, dtmf,
>> reporting,
>> cdr, dailplan
>> write = system, call, log, verbose, agent, user, config, dtmf,
>> reporting,
>> cdr, dailplan
>>
>>
>> Your help is greatly appreciated,
>>
>>
>>
>> Saad
>>
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by
>> http://www.api-digital.com-- <http://www.api-digital.com--/>
>>
>> asterisk-gui mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-gui
>>
>> --
>> ******************************
>> Brandon Kruse
>> Software Technician
>> Digium, Inc.
>> 150 West Park Loop, Suite 100
>> Huntsville, AL 35806
>> Phone: +1-256-428-6115
>> 877.546.8963
>> 877.linux.me!
>> www.digium.com <http://www.digium.com/>
>> www.asterisk.org <http://www.asterisk.org/>
>> ******************************
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by
>> http://www.api-digital.com-- <http://www.api-digital.com--/>
>>
>> asterisk-gui mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-gui
>>
>>
>>
>>
>
>
--
******************************
Brandon Kruse
Software Technician
Digium, Inc.
150 West Park Loop, Suite 100
Huntsville, AL 35806
Phone: +1-256-428-6115
877.546.8963
877.linux.me!
www.digium.com
www.asterisk.org
******************************
More information about the asterisk-gui
mailing list