[asterisk-gui] PRI with HDB3 and CRC4

[bkruse]

Olaf,

This is a rather confusing thing that should be fixed.

That file only gets updated with the 'astman.js' file (the file with the 
Revision variable) gets updated.

So we can update tons of different things, and you can checkout revision 
3,000, but the astman.js last changed revision is like 2,000. You can 
verify this by doing an svn info config/scripts/astman.js, and see the 
'last changed revision' number. (It will be 2124, I hope ;])

-bk


Olaf Marcos wrote:
> Hi Bkruse:
>
> I had updated my asterisk-gui to svn Checked out revision 2659. After 
> configure, make and make install, the "System Info" section of the GUI 
> is showing Asterisk GUI-version Revision: 2124 $ and the strange 
> behavior of the PRI Hardware Section is there.
>
> Any ideas?
>
> Olaf
>
> 2008/3/18, asterisk-gui-request at lists.digium.com 
> <mailto:asterisk-gui-request at lists.digium.com> 
> <asterisk-gui-request at lists.digium.com 
> <mailto:asterisk-gui-request at lists.digium.com>>:
>
>     Send asterisk-gui mailing list submissions to
>             asterisk-gui at lists.digium.com
>     <mailto:asterisk-gui at lists.digium.com>
>
>     To subscribe or unsubscribe via the World Wide Web, visit
>             http://lists.digium.com/mailman/listinfo/asterisk-gui
>     or, via email, send a message with subject or body 'help' to
>             asterisk-gui-request at lists.digium.com
>     <mailto:asterisk-gui-request at lists.digium.com>
>
>     You can reach the person managing the list at
>             asterisk-gui-owner at lists.digium.com
>     <mailto:asterisk-gui-owner at lists.digium.com>
>
>     When replying, please edit your Subject line so it is more specific
>     than "Re: Contents of asterisk-gui digest..."
>
>
>     Today's Topics:
>
>        1. PRI with HDB3 and CRC4 (Olaf Marcos)
>        2. Re: PRI with HDB3 and CRC4 (bkruse)
>        3. Re: What happened? (bkruse)
>        4. Re: What happened? (Sales at MichianaWireless.Com
>     <mailto:Sales at MichianaWireless.Com>)
>
>
>     ----------------------------------------------------------------------
>
>     Message: 1
>     Date: Mon, 17 Mar 2008 19:31:28 +0100
>     From: "Olaf Marcos" <olafmarcos at gmail.com
>     <mailto:olafmarcos at gmail.com>>
>     Subject: [asterisk-gui] PRI with HDB3 and CRC4
>     To: asterisk-gui at lists.digium.com
>     <mailto:asterisk-gui at lists.digium.com>
>     Message-ID:
>             <acaa08dc0803171131w78ab8e2fv561bb6e6a0f1e3d8 at mail.gmail.com
>     <mailto:acaa08dc0803171131w78ab8e2fv561bb6e6a0f1e3d8 at mail.gmail.com>>
>     Content-Type: text/plain; charset="iso-8859-1"
>
>     Hi list:
>
>     I think that there is a bug in the parser of zaptel.conf.zapscan of
>     asterisk-gui.
>
>     On Setup Hardware section, I select that my pri is CCS,HDB3,CRC4.
>     But when I
>     reboot as needed, again the pri is unconfigured. I checked
>     zaptel.conf.zapscan, and the line is:
>
>     span=2,1,0,ccs,CRC4/HDB3
>
>     this format is incorrect cause zaptel again shows as unconfigured.
>
>     Best regards,
>
>
>     Olaf Marcos
>
>
>
>
>     --
>     Olaf Marcos
>     olafmarcos at gmail.com <mailto:olafmarcos at gmail.com>
>     -------------- next part --------------
>     An HTML attachment was scrubbed...
>     URL:
>     http://lists.digium.com/pipermail/asterisk-gui/attachments/20080317/effb449d/attachment.html
>
>     ------------------------------
>
>     Message: 2
>     Date: Mon, 17 Mar 2008 14:41:59 -0500
>     From: bkruse <bkruse at digium.com <mailto:bkruse at digium.com>>
>     Subject: Re: [asterisk-gui] PRI with HDB3 and CRC4
>     To: Asterisk GUI project discussion <asterisk-gui at lists.digium.com
>     <mailto:asterisk-gui at lists.digium.com>>
>     Message-ID: <47DEC987.6030309 at digium.com
>     <mailto:47DEC987.6030309 at digium.com>>
>     Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>     Please update, we do NOT use zaptel.conf.zapscan.
>
>     Besides, that line should be written:
>     span=2,1,0,ccs,crc4,hdb3
>     and NOT:
>     span=2,1,0,ccs,CRC4/HDB3
>
>     Please update asteriskNOW and/or the asterisk-gui (from the
>     branches/asterisknow repo)
>
>     http://asterisknow.org/install-related
>
>     -bk
>
>     Olaf Marcos wrote:
>     > Hi list:
>     >
>     > I think that there is a bug in the parser of zaptel.conf.zapscan of
>     > asterisk-gui.
>     >
>     > On Setup Hardware section, I select that my pri is
>     CCS,HDB3,CRC4. But
>     > when I reboot as needed, again the pri is unconfigured. I checked
>     > zaptel.conf.zapscan, and the line is:
>     >
>     > span=2,1,0,ccs,CRC4/HDB3
>     >
>     > this format is incorrect cause zaptel again shows as unconfigured.
>     >
>     > Best regards,
>     >
>     >
>     > Olaf Marcos
>     >
>     >
>     >
>     >
>     > --
>     > Olaf Marcos
>     > olafmarcos at gmail.com <mailto:olafmarcos at gmail.com>
>     <mailto:olafmarcos at gmail.com <mailto:olafmarcos at gmail.com>>
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>     >
>     > asterisk-gui mailing list
>     > To UNSUBSCRIBE or update options visit:
>     >    http://lists.digium.com/mailman/listinfo/asterisk-gui
>
>
>
>
>
> -- 
> Olaf Marcos
> olafmarcos at gmail.com <mailto:olafmarcos at gmail.com>
>
> -- 
> Olaf Marcos
> olafmarcos at gmail.com <mailto:olafmarcos at gmail.com>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui