[asterisk-gui] Bandwidth.com extensions

[Brandon Kruse]

I think it is clearly a configuration issue.

What version of asterisk/asterisk-gui are you using?

The asterisk GUI makes two extensions for bandwidth.com
extensions (to match the plus).

Anytime you edit it manually, it is up to you ti figure out what you have done :)

-brandon


----- Original Message -----
From: "Trevor Benson" <tbenson at a-1networks.com>
To: asterisk-gui at lists.digium.com
Sent: Thursday, June 12, 2008 6:57:41 PM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-gui] Bandwidth.com extensions

Maybe we could make an "ALL Providers" option that drops the extension into the default automatically?  Just a thought since I am not sure if there is a good resolution to this yet. 

Might be nice for redundant PRI uplinks where the telco will switch over all your DID's to your secondary circuit in the case that a primary circuit fails.  Otherwise this would require duplicate code on each trunk.  Or maybe making a multiselect option for that where multiple trunks have the same DID list.

Just tossing out ideas.

Thanks,
Trevor

> -----Original Message-----
> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> bounces at lists.digium.com] On Behalf Of Trevor Benson
> Sent: Wednesday, June 11, 2008 9:09 PM
> To: 'Asterisk GUI project discussion'
> Subject: Re: [asterisk-gui] Bandwidth.com extensions
> 
> Here it is.
> 
> newvoip*CLI> dialplan show DID_trunk_2
> [ Context 'DID_trunk_2' created by 'pbx_config' ]
>   's' =>            1. ExecIf($[ "${CALLERID(num)}"=""
> ]|SetCallerPres|unavailable) [pbx_config]
>                     2. ExecIf($[ "${CALLERID(num)}"=""
> ]|Set|CALLERID(all)=unknown <0000000>) [pbx_config]
>                     3. Goto(default|900|1)
> [pbx_config]
>   '_+17077039999' => 1. Goto(default|900|1)
> [pbx_config]
>   '_X.' =>          1. Goto(default|900|1)
> [pbx_config]
>   Include =>        'default'
> [pbx_config]
> 
> -= 3 extensions (5 priorities) in 1 context. =-
> newvoip*CLI>
> 
> I don't think I need the _ in the extension since it's a full number,
> but don't think it will hurt either.  I set it to answer the exact
> extension, any number, and a few other variations that always gave the
> same error no matter what I set it to.  At that point I figured it's
> not matching the context. Since Bandwidth.com does not use registration
> that is causing a context mismatch when the call comes in, thus no
> extension match?
> 
> Thanks,
> Trevor
> 
> > -----Original Message-----
> > From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> > bounces at lists.digium.com] On Behalf Of Brandon Kruse
> > Sent: Wednesday, June 11, 2008 3:10 PM
> > To: Asterisk GUI project discussion
> > Subject: Re: [asterisk-gui] Bandwidth.com extensions
> >
> > Do a dialplan show context-name and see if you see that number.
> >
> > -brandon
> > ----- Original Message -----
> > From: "Trevor Benson" <tbenson at a-1networks.com>
> > To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
> > Sent: Wednesday, June 11, 2008 4:54:45 PM GMT -06:00 US/Canada
> Central
> > Subject: [asterisk-gui] Bandwidth.com extensions
> >
> > Seem to be having an issue with creating a rule that actually routes
> > traffic into the system.  I added a all unmatched rule for
> > bandwidth.com and the +17077039999 (lets say, as last 4 digits are
> > obfuscated). In either case the system returns:
> >
> > [Jun 11 14:51:10] NOTICE[12869]: chan_sip.c:13952
> > handle_request_invite: Call from '' to extension '+17077039999'
> > rejected because extension not found.
> >
> > Is there something wrong with trying to load bandwidth.com for
> inbound
> > rules?  I augmented the system a little by hand to resolve answering
> > (matched my old 1.2 system) still seems to want to ignore the
> request.
> >
> > Thanks,
> > Trevor
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-gui mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-gui
> >
> > --
> > ******************************
> > Brandon Kruse
> > Software Technician
> > Digium, Inc.
> > 150 West Park Loop, Suite 100
> > Huntsville, AL 35806
> > Phone: +1-256-428-6115
> > 877.546.8963
> > 877.linux.me!
> > www.digium.com
> > www.asterisk.org
> > ******************************
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-gui mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-gui
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

-- 
******************************
Brandon Kruse
Software Technician
Digium, Inc.
150 West Park Loop, Suite 100
Huntsville, AL 35806
Phone: +1-256-428-6115
877.546.8963
877.linux.me!
www.digium.com
www.asterisk.org
******************************