[asterisk-gui] Paging/intercom

[Brent Vrieze]

OOOOPS, a top post, just following the patter.

I think that sounds good too. I also would not mind this in the Ring 
Groups area as I have set some of my ring groups to an alternate ring 
tone that I use
header info to trigger.


Josh Thomas wrote:
> Maybe on the settings page for the page we can have an option for 
> Alert-info or Call-Info. As this is the case for my phones as well.
>
> Grandstream phones also need:
> *exten => s,2,SIPAddHeader(Call-Info: answer-after=0)
> *
>
>
> On 12/18/08 10:40 AM, "Ron Byer Jr." <ronb at netweave.com> wrote:
>
>     The next time I post a query on this list, I will be sure to
>     download the latest/greatest version and check it out first.
>
>     I posted a note about paging and intercom support a few days ago
>     :: I’ve been using an **early** asterisk-gui 2.0 version from, I’d
>     say, 2 months ago .
>
>     When I received the note back from Pari saying he had made a
>     change, I updated and took a look – and found a whole panel
>     dedicated to paging/intercom. At that point I felt a bit like a
>     horse’s hindquarters. Thanks guys, I should have RTFC’ed before
>     bothering the list.
>
>
>     That being said. I have another (hopefully better informed)
>     question. I have it working fine now, using the paging/intercom
>     panel. I had to make one change to the standard macro being
>     generated. I recognize that I could make the change in the java
>     script that generates the standard macro ,but wonder if it would
>     be better done more generally.
>
>     The following is the section from extensions.conf. Of the four
>     contexts, the first I provided, and the last three were generated.
>     In order for this to work properly, I needed to add the
>     “@ext-paging” context to the macro-pagingintercom invocation in
>     the [page_an_extension] and [pagegroups] contexts
>
>     My question is, would it be best for the GUI to prompt the user
>     for the Page context (in this case the ext-paging context) – I
>     don’t think that the GUI should generate this context, because it
>     will need to be meddled with. By asking the user to enter the Page
>     context, it will also clue them as to the need for it.
>
>     [ext-paging]
>     ; below works for snom phones... other phones may need flavor 2
>     (following)
>     exten => _XXX,1,Set(__SIPADDHEADER=Call-Info: Answer-After=0)
>     ;exten = s,n,SIPAddHeader(Call-Info: <sip:${my-ip}>\;answer-after=0)
>     exten => _XXX,n,Set(__SIP_URI_OPTIONS=intercom=true)
>     exten => _XXX,n,Set(__ALERT_INFO=Ring Answer)
>     exten => _XXX,n,Dial(SIP/${EXTEN},20|pN)
>
>     [macro-pagingintercom]
>     exten = s,1,SIPAddHeader(Alert-Info: ${PAGING_HEADER})
>     exten = s,n,Page(${ARG1}|${ARG2})
>     exten = s,n,Hangup
>
>
>     [page_an_extension]
>     exten = _#XXX,1,Macro(pagingintercom|Local/${EXTEN:1*}@ext-paging*|d)
>
>     [pagegroups]
>     exten =
>     6400,1,Macro(pagingintercom|SIP/100@*ext-paging*&SIP/181@*ext-paging|d*)
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui