[asterisk-gui] Digital Card Detection and Setup Finished!

[QUICK, RANDY]

Updated zaptel and the card is up but the GUI does not keep all of the
info and ztcfg still does not work.  Could it be because my card is the
new TE220B?

The GUI never keeps the following in the "Digital Card Setup" form even
though it's in the conf files:

Framing/Coding
Line Build Out

Here is my zaptel.conf:

span = 1,1,0,esf,b8zs
bchan = 1-23
dchan = 24
loadzone = us
defaultzone = us

Here is my users.conf:

[span_1]
switchtype = qsig
signalling = pri_cpe
context = DID_span_1
group = 1
trunkname = Span 1
trunkstyle = digital
zapchan = 1-23

Thanks,

Randy Quick
Communicatoins Tech II
Texoma Medical Center


-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com
[mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of Brandon
Kruse
Sent: Friday, October 19, 2007 9:21 AM
To: Asterisk GUI project discussion
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!

I have no idea why you would have that but not ztcfg.

Recheckout and install zaptel and try again, paste your
zaptel.conf settings along with users.conf (make sure to update the gui
to todays revision)

-bk
----- Original Message -----
From: "RANDY QUICK" <RQUICK at THCS.ORG>
To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
Sent: Thursday, October 18, 2007 9:18:12 AM (GMT-0600) America/Chicago
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!

Yes.  It comes preinstalled with asteriskNOW and I haven't removed it.
It does save the zaptel.conf but it doesn't stay in the gui once it is
configured.

When I do a "zap show status" I get:

Description                              Alarms     IRQ        bpviol
CRC4  
T2XXP (PCI) Card 0 Span 1                UNCONFIGUR 0          0
0     
T2XXP (PCI) Card 0 Span 2                UNCONFIGUR 0          0
0     


It wouldn't see the card without zaptel.  Correct?

When I run ztcfg -vv I get:

[root at TEXVOIP-TMC etc]# ztcfg -vv
bash: ztcfg: command not found

Any more ideas?


RQ


-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com
[mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of Brandon
Kruse
Sent: Wednesday, October 17, 2007 10:25 PM
To: Asterisk GUI project discussion
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!

Do you not have zaptel installed?

-bk
----- Original Message -----
From: "RANDY QUICK" <RQUICK at THCS.ORG>
To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
Sent: Wednesday, October 17, 2007 12:46:30 PM (GMT-0800)
America/Los_Angeles
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!

Zaptel.conf:

span = 1,1,0,esf,b8zs
bchan = 1-23
dchan = 24
loadzone = us
defaultzone = us

When I save it does not change zaptel.conf.

I get this with ztcfg -vv:

[root at TEXVOIP-TMC etc]# ztcfg -vv
bash: ztcfg: command not found

Thanks for the help!

-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com
[mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of bkruse
Sent: Wednesday, October 17, 2007 2:11 PM
To: Asterisk GUI project discussion
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!

Can you  check our your save /etc/zaptel.conf
and restart and see if /etc/zaptel.conf is the same?

When you ztcfg -vv, does it show your card?
does /etc/zaptel.conf have the card entry?

-bk

QUICK, RANDY wrote:
> Hey guys,
>
> Just downloaded the 1697 revision and when I setup the span in Digital
> Card Setup in the "options" I click "Apply Changes" and am prompted
that
> I will have to reboot.  Once I reboot the settings I just setup are
> gone.
>
> Any ideas?
>
> Thanks!
>
> The card is labeled as SPAN T2XXP (PCI) Card 0 Span 1
>
> -----Original Message-----
> From: asterisk-gui-bounces at lists.digium.com
> [mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of bkruse
> Sent: Wednesday, October 17, 2007 1:20 PM
> To: Asterisk GUI project discussion
> Subject: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Hey Guys,
>
> Pari and I just got finished working the digital card detection.
>
> It is currently only in branches/asterisknow 
> (http://asteriskNOW.org/install-related for checkout instructions)
>
> Download it and try it out with your current hardware, give us some 
> feedback.
>
> I am also working on b410p detection/configuration and will keep you 
> updated.
>
> This is a big advancement, however!
>
> Thanks for sticking with it!
>
> -bk
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui
>   


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui